Any tips?

Anyone know any tips or tricks with samsung t100?

Code Result
*2767*2878# WARNING! REMOVE THE SIM FIRST! Custom EEPROM (Electrically Erasable Programmable Read-Only Memory) reset. This code only resets the EEPROM. It doesn’t remove the Service Provider (SP)-lock and doesn’t change the IMEI (International Mobile Equipment Identity) number

*2767*3855# WARNING! REMOVE THE SIM FIRST! Full EEPROM reset. This code resets the EEPROM, removes the SP-lock and also changes the IMEI to 447967-89-400044-0. You must use the program chgimei.exe to restore it

*2767*63342# WARNING! REMOVE THE SIM FIRST! Full media reset. This code resets the ring tones and graphics to the factory state

*2767*927# WARNING! REMOVE THE SIM FIRST! This code resets the WAP (Wireless Application Protocol) to the factory state
*#06# Shows IMEI number
*#0001# Shows RS232 (physical interface) serial communication parameter setup

*#8999*228# Shows battery type, voltage and temperature
*#8999*246# Show the memory capacity
*#8999*268# Enter or change the displayed text during start-up (max. 16 characters)
*#8999*289# Ring tone test, doesn’t work on all FirmWares (FWs)
*#8999*289# Change Alarm Buzzer Frequency, doesn’t work on all FWs
*#8999*324# Shows the network checkout (engineering model)
*#8999*364# Shows the watchdog state
*#8999*377# Shows the software error LOG (wrong display of EEPROM)
*#8999*427# Watchdog signal route setup
*#8999*523# Adjust display contrast; don’t set contrast volume higher then 34
*#8999*544# Shows and let you adjust the Jig detect
*#8999*636# Shows storage capacity
*#8999*638# Shows network information
*#8999*746# Shows the SIM (Subscriber Identity Module) File Size.
ADN= (Abbreviated Dialing Numbers): amount of names and numbers storable on the SIM
EXT1= the amount of numbers storable with more then 20 digits
LND= (Last Dialed Numbers): amount of last numbers that you dialed storable on the SIM
SMS= the amount of SMS storable on the SIM
CBMI= (Cell Broadcast Message Identifier)
PLMN= (Public Land Mobile Network
LP=?
MSISDN= (Mobile Station international ISDN number): the dialing numbers that callers use to reach a mobile subscriber
*#8999*778# Shows SIM card information
*#8999*782# Shows date and alarm clock
*#8999*785# Shows the RTK (Run Time Kernel) errors
*#8999*786# Shows the uptime relative and absolute, last shut down and how long the phone was activated before the last shutdown
*#8999*837# Shows the Samsung hardware version, doesn’t work on all FWs
*#8999*842# Executes the vibrate test
*#8999*862# Shows Vocoder Registration
*#8999*872# Shows diagnostics
*#8999*947# Lets you adjust if the phone need to reset on a fatal error
*#8999*999# Shows Last/Chk
*#8999*9266# Shows received channel number and received intensity
*#8999*9999# Shows Firmware version

This are all the codes I know.
read the description of each code CAREFULLY before you USE them.

Forgot to say that some codes works and others dont. Some codes are for specific firmware versions.......

Want to know how you can add words to you t9 option?

hmm might not work on new samsungs then

These codes are for the Samsung t100.

I ment the firmware versions for the t100. (different sofware)

Could sum 1 help me or tell me wat firmware is an the software 2 upload it if it is wt i think it is wat does it change on the phone?

Firmware is just an other word for software on your mobile phone.
ITs possible to change this firmware to an other firmware with more functions (answerphone for instance).
For this you need toolbox and a firmware.

*#9998*5282# - for additional GPRS and CSD setting