Not Enough Power???

At some point during the day, my Treo 650 powered the radio off by itself
and went unnoticed for a while. When I attempted to turn it on again, I got
the message..."Not enough power to activate the phone". Then it took longer
than usual to search for the network. This was after it had been in it's
charging cradle and the battery was completely topped off. I've never seen
this message before. Any idea what the problem was?

Do you have all the current software (firmware) updates on the unit? If
not download the update from here and upload the new firmware.:
http://www.palm.com/cingularupdate

Other than that you might want to try and remove the battery and
reinsert it to do a soft reset or use you stylsis to do a full reset
and see if that works for you.

"Wirelessjuan" <wirelessjuan@yahoo.com> wrote in message
news:1135030995.608089.17240@g49g2000cwa.googlegro ups.com...
> Do you have all the current software (firmware) updates on the unit? If
> not download the update from here and upload the new firmware.:
> http://www.palm.com/cingularupdate
>
> Other than that you might want to try and remove the battery and
> reinsert it to do a soft reset or use you stylsis to do a full reset
> and see if that works for you.

Everything is updated and the sim card tray wasn't the issue. It's not an
ongoing problem and the phone finally found the network. I was just curious
about this isolated incident.
>

Ric wrote:
> "Not enough power to activate the phone".

LOL...my first thought it was James Doonan (aka "Scotty" from Star Trek)
calling you from the Great Beyond. With Super-GSM 3G++++ phone of
course!

DecaturTxCowboy wrote:
> Ric wrote:
>
>> "Not enough power to activate the phone".
>
>
> LOL...my first thought it was James Doonan (aka "Scotty" from Star Trek)
> calling you from the Great Beyond. With Super-GSM 3G++++ phone of
> course!

My bad...its James Doohan (pronounced DOO-en)

Ric napisal(a):
> At some point during the day, my Treo 650 powered the radio off by itself
> and went unnoticed for a while. When I attempted to turn it on again, I got
> the message..."Not enough power to activate the phone". Then it took longer
> than usual to search for the network. This was after it had been in it's
> charging cradle and the battery was completely topped off. I've never seen
> this message before. Any idea what the problem was?

Try ZeroOutReset:
http://kb.palmone.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External20 01,case=obj(887)#zeroout