Results 1 to 2 of 2
  1. #1
    robboll
    Guest
    I installed TomTom Navigator 6 on my Treo 650 and it is very
    responsive and works very well. My wife wanted a Treo so I purchased
    a Treo 680 for her. After upgrading the 680 firmware so that it
    didn't
    use up the battery so fast (among other things) -- I had to install
    Palm's
    patch for Navigator 6 so it was compatible with the 680. I was
    successful at
    applying the patch but the performance is nothing to be desired.
    TomTom runs in slow motion -- nothing like the 650. If I can't find
    a
    solution to the slow response time I'll be getting her a 650 (if I
    can
    find one). Is anyone else experiencing this kind of performance with
    the Treo 680 and TomTom Navigator 6?

    What about a 750? TomTom also has a patch for the 750 so that it
    works with Navigator 6. Is this slow eratic performance seen with
    the
    Treo 750 and Navigator 6 too? Appreciate any suggestions. Thanks.


    RBollinger




    See More: Palm Treos and TomTom Navigator 6




  2. #2
    robboll
    Guest

    Re: Palm Treos and TomTom Navigator 6

    On May 28, 3:31 pm, robboll <[email protected]> wrote:
    > I installed TomTom Navigator 6 on my Treo 650 and it is very
    > responsive and works very well. My wife wanted a Treo so I purchased
    > a Treo 680 for her. After upgrading the 680 firmware so that it
    > didn't
    > use up the battery so fast (among other things) -- I had to install
    > Palm's
    > patch for Navigator 6 so it was compatible with the 680. I was
    > successful at
    > applying the patch but the performance is nothing to be desired.
    > TomTom runs in slow motion -- nothing like the 650. If I can't find
    > a
    > solution to the slow response time I'll be getting her a 650 (if I
    > can
    > find one). Is anyone else experiencing this kind of performance with
    > the Treo 680 and TomTom Navigator 6?
    >
    > What about a 750? TomTom also has a patch for the 750 so that it
    > works with Navigator 6. Is this slow eratic performance seen with
    > the
    > Treo 750 and Navigator 6 too? Appreciate any suggestions. Thanks.
    >
    > RBollinger


    Never mind -- I found my own solution. It's amazing what a little
    internet research can do your you.

    On a windows PC you need to format your flashcard as follows:

    Originally Posted by Barnel
    Very important is the cluster size of your card. You will get the best
    results with the following cluster sizes. Use the DOS box for
    formatting your card. I`m using a Transcend 4 GB / 150x with best
    results (16K), even with big Western Europe map.

    Less than 4 GB (FAT16):
    2 GB SD (SanDisk) FAT16 mit 32K: format X: /FS:FAT /A:32K

    4 GB and more (FAT32):
    4 GB SD or SDHC (Transcend) FAT32 mit 16K: format X: /FS:FAT32 /A:16K


    "X" is the drive letter.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    After formatting my 2.0 GB Memory Card using the above an then copying
    the original files back to it, the TomTom Navigator 6 software
    screams. Tested and satisfied. Hope this helps someone else. Thank
    you Barnel for sharing your knowledge at http://discussion.treocentral.com/sh...d.php?t=134695

    RBollinger




  • Similar Threads