Results 1 to 15 of 21
- 03-31-2004, 04:10 PM #1Trebor NamwobGuest
Something is really bugging me. My wife and I have a shared AT&T
Wireless account. When I turn my new v60c phone on--and after the
splash screens appear--the field in the startup screen that shows the
carrier status usually shows "SHARED." That's OK, but here's what
really bugs me, because it just looks sloppy: the word "SHARED" is
not centered on the screen as are the time and date, but is about 3
characters too far to the left. (On those occasions when they appear,
"AT&T" and "ROAM" are nicely centered.)
So my question is, how do I fix this? (I know it's possible because I
had a very nice AT&T Wireless tech support person telling me how until
someone apparently told her not to, causing her to beg off.)
Yes, I know it sounds like I'm OCD, but please help me if you can!
› See More: Changing Carrier Status Display on v60c Phone?
- 03-31-2004, 06:32 PM #2xwGuest
Re: Changing Carrier Status Display on v60c Phone?
On your phone type: #program# <send> , enter your security code, select
"NAM SETUP", than "NAM1", "Level 1", HOME TAG there is where you want to
input say AT&T Wireless that way your phone always displays "AT&T WIRELESS"
"Trebor Namwob" <[email protected]> wrote in message
news:[email protected]...
> Something is really bugging me. My wife and I have a shared AT&T
> Wireless account. When I turn my new v60c phone on--and after the
> splash screens appear--the field in the startup screen that shows the
> carrier status usually shows "SHARED." That's OK, but here's what
> really bugs me, because it just looks sloppy: the word "SHARED" is
> not centered on the screen as are the time and date, but is about 3
> characters too far to the left. (On those occasions when they appear,
> "AT&T" and "ROAM" are nicely centered.)
>
> So my question is, how do I fix this? (I know it's possible because I
> had a very nice AT&T Wireless tech support person telling me how until
> someone apparently told her not to, causing her to beg off.)
>
> Yes, I know it sounds like I'm OCD, but please help me if you can!
- 03-31-2004, 06:32 PM #3xwGuest
Re: Changing Carrier Status Display on v60c Phone?
On your phone type: #program# <send> , enter your security code, select
"NAM SETUP", than "NAM1", "Level 1", HOME TAG there is where you want to
input say AT&T Wireless that way your phone always displays "AT&T WIRELESS"
"Trebor Namwob" <[email protected]> wrote in message
news:[email protected]...
> Something is really bugging me. My wife and I have a shared AT&T
> Wireless account. When I turn my new v60c phone on--and after the
> splash screens appear--the field in the startup screen that shows the
> carrier status usually shows "SHARED." That's OK, but here's what
> really bugs me, because it just looks sloppy: the word "SHARED" is
> not centered on the screen as are the time and date, but is about 3
> characters too far to the left. (On those occasions when they appear,
> "AT&T" and "ROAM" are nicely centered.)
>
> So my question is, how do I fix this? (I know it's possible because I
> had a very nice AT&T Wireless tech support person telling me how until
> someone apparently told her not to, causing her to beg off.)
>
> Yes, I know it sounds like I'm OCD, but please help me if you can!
- 04-01-2004, 05:32 AM #4Trebor NamwobGuest
Re: Changing Carrier Status Display on v60c Phone?
"xw" <[email protected]> wrote in message news:<[email protected]>...
> On your phone type: #program# <send> , enter your security code, select
> "NAM SETUP", than "NAM1", "Level 1", HOME TAG there is where you want to
> input say AT&T Wireless that way your phone always displays "AT&T WIRELESS"
Thanks for taking the time to reply, I'll give it a shot.
- 04-01-2004, 05:32 AM #5Trebor NamwobGuest
Re: Changing Carrier Status Display on v60c Phone?
"xw" <[email protected]> wrote in message news:<[email protected]>...
> On your phone type: #program# <send> , enter your security code, select
> "NAM SETUP", than "NAM1", "Level 1", HOME TAG there is where you want to
> input say AT&T Wireless that way your phone always displays "AT&T WIRELESS"
Thanks for taking the time to reply, I'll give it a shot.
- 04-01-2004, 06:29 AM #6Trebor NamwobGuest
Re: Changing Carrier Status Display on v60c Phone?
"xw" <[email protected]> wrote in message news:<[email protected]>...
> On your phone type: #program# <send> , enter your security code, select
> "NAM SETUP", than "NAM1", "Level 1", HOME TAG there is where you want to
> input say AT&T Wireless that way your phone always displays "AT&T WIRELESS"
>
>
> "Trebor Namwob" <[email protected]> wrote in message
> news:[email protected]...
> > Something is really bugging me. My wife and I have a shared AT&T
> > Wireless account. When I turn my new v60c phone on--and after the
> > splash screens appear--the field in the startup screen that shows the
> > carrier status usually shows "SHARED." That's OK, but here's what
> > really bugs me, because it just looks sloppy: the word "SHARED" is
> > not centered on the screen as are the time and date, but is about 3
> > characters too far to the left. (On those occasions when they appear,
> > "AT&T" and "ROAM" are nicely centered.)
> >
> > So my question is, how do I fix this? (I know it's possible because I
> > had a very nice AT&T Wireless tech support person telling me how until
> > someone apparently told her not to, causing her to beg off.)
> >
> > Yes, I know it sounds like I'm OCD, but please help me if you can!
As it turned out, the process was a little more complicated--had to go
into NAM Setup > Level 1 > Level 3 > PSID/RSIDs > PSID/RSID1 > Alpha
Tag--but you got me on the right track. The display now reads,
centered, "AT&T Wireless", rather than that dorky non-centered
"SHARED." Sloppiness of this sort always make me wonder where else
sloppiness exists in a system, and whether it's a sloppiness that can
cause real trouble.
Thanks again for your help.
- 04-01-2004, 06:29 AM #7Trebor NamwobGuest
Re: Changing Carrier Status Display on v60c Phone?
"xw" <[email protected]> wrote in message news:<[email protected]>...
> On your phone type: #program# <send> , enter your security code, select
> "NAM SETUP", than "NAM1", "Level 1", HOME TAG there is where you want to
> input say AT&T Wireless that way your phone always displays "AT&T WIRELESS"
>
>
> "Trebor Namwob" <[email protected]> wrote in message
> news:[email protected]...
> > Something is really bugging me. My wife and I have a shared AT&T
> > Wireless account. When I turn my new v60c phone on--and after the
> > splash screens appear--the field in the startup screen that shows the
> > carrier status usually shows "SHARED." That's OK, but here's what
> > really bugs me, because it just looks sloppy: the word "SHARED" is
> > not centered on the screen as are the time and date, but is about 3
> > characters too far to the left. (On those occasions when they appear,
> > "AT&T" and "ROAM" are nicely centered.)
> >
> > So my question is, how do I fix this? (I know it's possible because I
> > had a very nice AT&T Wireless tech support person telling me how until
> > someone apparently told her not to, causing her to beg off.)
> >
> > Yes, I know it sounds like I'm OCD, but please help me if you can!
As it turned out, the process was a little more complicated--had to go
into NAM Setup > Level 1 > Level 3 > PSID/RSIDs > PSID/RSID1 > Alpha
Tag--but you got me on the right track. The display now reads,
centered, "AT&T Wireless", rather than that dorky non-centered
"SHARED." Sloppiness of this sort always make me wonder where else
sloppiness exists in a system, and whether it's a sloppiness that can
cause real trouble.
Thanks again for your help.
- 04-01-2004, 10:33 PM #8JerryGuest
Re: Changing Carrier Status Display on v60c Phone?
I tried this on a Motorola C353 TDMA phone. I pressed #7764726# (which
is the numbers that give "program") and then Snd. It proceeded to make
the call. I got en error message from
xw wrote:
> On your phone type: #program# <send> , enter your security code, select
> "NAM SETUP", than "NAM1", "Level 1", HOME TAG there is where you want to
> input say AT&T Wireless that way your phone always displays "AT&T WIRELESS"
>
>
> "Trebor Namwob" <[email protected]> wrote in message
> news:[email protected]...
>
>>Something is really bugging me. My wife and I have a shared AT&T
>>Wireless account. When I turn my new v60c phone on--and after the
>>splash screens appear--the field in the startup screen that shows the
>>carrier status usually shows "SHARED." That's OK, but here's what
>>really bugs me, because it just looks sloppy: the word "SHARED" is
>>not centered on the screen as are the time and date, but is about 3
>>characters too far to the left. (On those occasions when they appear,
>>"AT&T" and "ROAM" are nicely centered.)
>>
>>So my question is, how do I fix this? (I know it's possible because I
>>had a very nice AT&T Wireless tech support person telling me how until
>>someone apparently told her not to, causing her to beg off.)
>>
>>Yes, I know it sounds like I'm OCD, but please help me if you can!
>
- 04-01-2004, 10:33 PM #9JerryGuest
Re: Changing Carrier Status Display on v60c Phone?
I tried this on a Motorola C353 TDMA phone. I pressed #7764726# (which
is the numbers that give "program") and then Snd. It proceeded to make
the call. I got en error message from
xw wrote:
> On your phone type: #program# <send> , enter your security code, select
> "NAM SETUP", than "NAM1", "Level 1", HOME TAG there is where you want to
> input say AT&T Wireless that way your phone always displays "AT&T WIRELESS"
>
>
> "Trebor Namwob" <[email protected]> wrote in message
> news:[email protected]...
>
>>Something is really bugging me. My wife and I have a shared AT&T
>>Wireless account. When I turn my new v60c phone on--and after the
>>splash screens appear--the field in the startup screen that shows the
>>carrier status usually shows "SHARED." That's OK, but here's what
>>really bugs me, because it just looks sloppy: the word "SHARED" is
>>not centered on the screen as are the time and date, but is about 3
>>characters too far to the left. (On those occasions when they appear,
>>"AT&T" and "ROAM" are nicely centered.)
>>
>>So my question is, how do I fix this? (I know it's possible because I
>>had a very nice AT&T Wireless tech support person telling me how until
>>someone apparently told her not to, causing her to beg off.)
>>
>>Yes, I know it sounds like I'm OCD, but please help me if you can!
>
- 04-02-2004, 04:08 AM #10The Dr Is InGuest
Re: Changing Carrier Status Display on v60c Phone?
>That's OK, but here's what
>really bugs me, because it just looks sloppy: the word "SHARED" is
>not centered on the screen as are the time and date, but is about 3
>characters too far to the left. (On those occasions when they appear,
>"AT&T" and "ROAM" are nicely centered.)
<So my question is, how do I fix this? (I know it's possible because I
<had a very nice AT&T Wireless tech support person telling me how until
>someone apparently told her not to, causing her to beg off.)
..>Yes, I know it sounds like I'm OCD, but please help me if you can!
Sounds like? Try textbook case.
> As it turned out, the process was a little more complicated--had to go
> into NAM Setup > Level 1 > Level 3 > PSID/RSIDs > PSID/RSID1 > Alpha
> Tag--but you got me on the right track. The display now reads,
> centered, "AT&T Wireless", rather than that dorky non-centered
> "SHARED."
> Sloppiness of this sort always make me wonder where else
> sloppiness exists in a system, and whether it's a sloppiness that can
> cause real trouble.
> Thanks again for your help.
Seek Professional Help, FAST
Its just a matter of time before you walk into the room and all your
friends and family will be there, and want to have a chat.
They call it an "intervention".
BTW, If they tell ya the planes going to Disney World, don't believe them.
- 04-02-2004, 04:08 AM #11The Dr Is InGuest
Re: Changing Carrier Status Display on v60c Phone?
>That's OK, but here's what
>really bugs me, because it just looks sloppy: the word "SHARED" is
>not centered on the screen as are the time and date, but is about 3
>characters too far to the left. (On those occasions when they appear,
>"AT&T" and "ROAM" are nicely centered.)
<So my question is, how do I fix this? (I know it's possible because I
<had a very nice AT&T Wireless tech support person telling me how until
>someone apparently told her not to, causing her to beg off.)
..>Yes, I know it sounds like I'm OCD, but please help me if you can!
Sounds like? Try textbook case.
> As it turned out, the process was a little more complicated--had to go
> into NAM Setup > Level 1 > Level 3 > PSID/RSIDs > PSID/RSID1 > Alpha
> Tag--but you got me on the right track. The display now reads,
> centered, "AT&T Wireless", rather than that dorky non-centered
> "SHARED."
> Sloppiness of this sort always make me wonder where else
> sloppiness exists in a system, and whether it's a sloppiness that can
> cause real trouble.
> Thanks again for your help.
Seek Professional Help, FAST
Its just a matter of time before you walk into the room and all your
friends and family will be there, and want to have a chat.
They call it an "intervention".
BTW, If they tell ya the planes going to Disney World, don't believe them.
- 04-02-2004, 09:16 AM #12xwGuest
Re: Changing Carrier Status Display on v60c Phone?
Thus the reason why I told him this was the code to do it on the v60's
nowhere does it say it works for all motorolas..
"Jerry" <[email protected]> wrote in message
news:[email protected]...
> I tried this on a Motorola C353 TDMA phone. I pressed #7764726# (which
> is the numbers that give "program") and then Snd. It proceeded to make
> the call. I got en error message from
>
> xw wrote:
> > On your phone type: #program# <send> , enter your security code, select
> > "NAM SETUP", than "NAM1", "Level 1", HOME TAG there is where you want to
> > input say AT&T Wireless that way your phone always displays "AT&T
WIRELESS"
> >
> >
> > "Trebor Namwob" <[email protected]> wrote in message
> > news:[email protected]...
> >
> >>Something is really bugging me. My wife and I have a shared AT&T
> >>Wireless account. When I turn my new v60c phone on--and after the
> >>splash screens appear--the field in the startup screen that shows the
> >>carrier status usually shows "SHARED." That's OK, but here's what
> >>really bugs me, because it just looks sloppy: the word "SHARED" is
> >>not centered on the screen as are the time and date, but is about 3
> >>characters too far to the left. (On those occasions when they appear,
> >>"AT&T" and "ROAM" are nicely centered.)
> >>
> >>So my question is, how do I fix this? (I know it's possible because I
> >>had a very nice AT&T Wireless tech support person telling me how until
> >>someone apparently told her not to, causing her to beg off.)
> >>
> >>Yes, I know it sounds like I'm OCD, but please help me if you can!
> >
- 04-02-2004, 09:16 AM #13xwGuest
Re: Changing Carrier Status Display on v60c Phone?
Thus the reason why I told him this was the code to do it on the v60's
nowhere does it say it works for all motorolas..
"Jerry" <[email protected]> wrote in message
news:[email protected]...
> I tried this on a Motorola C353 TDMA phone. I pressed #7764726# (which
> is the numbers that give "program") and then Snd. It proceeded to make
> the call. I got en error message from
>
> xw wrote:
> > On your phone type: #program# <send> , enter your security code, select
> > "NAM SETUP", than "NAM1", "Level 1", HOME TAG there is where you want to
> > input say AT&T Wireless that way your phone always displays "AT&T
WIRELESS"
> >
> >
> > "Trebor Namwob" <[email protected]> wrote in message
> > news:[email protected]...
> >
> >>Something is really bugging me. My wife and I have a shared AT&T
> >>Wireless account. When I turn my new v60c phone on--and after the
> >>splash screens appear--the field in the startup screen that shows the
> >>carrier status usually shows "SHARED." That's OK, but here's what
> >>really bugs me, because it just looks sloppy: the word "SHARED" is
> >>not centered on the screen as are the time and date, but is about 3
> >>characters too far to the left. (On those occasions when they appear,
> >>"AT&T" and "ROAM" are nicely centered.)
> >>
> >>So my question is, how do I fix this? (I know it's possible because I
> >>had a very nice AT&T Wireless tech support person telling me how until
> >>someone apparently told her not to, causing her to beg off.)
> >>
> >>Yes, I know it sounds like I'm OCD, but please help me if you can!
> >
- 04-03-2004, 11:09 AM #14JerryGuest
Re: Changing Carrier Status Display on v60c Phone?
I know you didn't say it would work on my phone. Many of the codes for
Nokia phones work multiple models and I HOPED that the same could be
said for Motorola phones.
Does anyone know a way to change the alpha tag on a C353?
xw wrote:
> Thus the reason why I told him this was the code to do it on the v60's
> nowhere does it say it works for all motorolas..
>
>
>
> "Jerry" <[email protected]> wrote in message
> news:[email protected]...
>
>>I tried this on a Motorola C353 TDMA phone. I pressed #7764726# (which
>>is the numbers that give "program") and then Snd. It proceeded to make
>>the call. I got en error message from
>>
>>xw wrote:
>>
>>>On your phone type: #program# <send> , enter your security code, select
>>>"NAM SETUP", than "NAM1", "Level 1", HOME TAG there is where you want to
>>>input say AT&T Wireless that way your phone always displays "AT&T
>
> WIRELESS"
>
>>>
>>>"Trebor Namwob" <[email protected]> wrote in message
>>>news:[email protected]...
>>>
>>>
>>>>Something is really bugging me. My wife and I have a shared AT&T
>>>>Wireless account. When I turn my new v60c phone on--and after the
>>>>splash screens appear--the field in the startup screen that shows the
>>>>carrier status usually shows "SHARED." That's OK, but here's what
>>>>really bugs me, because it just looks sloppy: the word "SHARED" is
>>>>not centered on the screen as are the time and date, but is about 3
>>>>characters too far to the left. (On those occasions when they appear,
>>>>"AT&T" and "ROAM" are nicely centered.)
>>>>
>>>>So my question is, how do I fix this? (I know it's possible because I
>>>>had a very nice AT&T Wireless tech support person telling me how until
>>>>someone apparently told her not to, causing her to beg off.)
>>>>
>>>>Yes, I know it sounds like I'm OCD, but please help me if you can!
>>>
>
>
- 04-03-2004, 11:09 AM #15JerryGuest
Re: Changing Carrier Status Display on v60c Phone?
I know you didn't say it would work on my phone. Many of the codes for
Nokia phones work multiple models and I HOPED that the same could be
said for Motorola phones.
Does anyone know a way to change the alpha tag on a C353?
xw wrote:
> Thus the reason why I told him this was the code to do it on the v60's
> nowhere does it say it works for all motorolas..
>
>
>
> "Jerry" <[email protected]> wrote in message
> news:[email protected]...
>
>>I tried this on a Motorola C353 TDMA phone. I pressed #7764726# (which
>>is the numbers that give "program") and then Snd. It proceeded to make
>>the call. I got en error message from
>>
>>xw wrote:
>>
>>>On your phone type: #program# <send> , enter your security code, select
>>>"NAM SETUP", than "NAM1", "Level 1", HOME TAG there is where you want to
>>>input say AT&T Wireless that way your phone always displays "AT&T
>
> WIRELESS"
>
>>>
>>>"Trebor Namwob" <[email protected]> wrote in message
>>>news:[email protected]...
>>>
>>>
>>>>Something is really bugging me. My wife and I have a shared AT&T
>>>>Wireless account. When I turn my new v60c phone on--and after the
>>>>splash screens appear--the field in the startup screen that shows the
>>>>carrier status usually shows "SHARED." That's OK, but here's what
>>>>really bugs me, because it just looks sloppy: the word "SHARED" is
>>>>not centered on the screen as are the time and date, but is about 3
>>>>characters too far to the left. (On those occasions when they appear,
>>>>"AT&T" and "ROAM" are nicely centered.)
>>>>
>>>>So my question is, how do I fix this? (I know it's possible because I
>>>>had a very nice AT&T Wireless tech support person telling me how until
>>>>someone apparently told her not to, causing her to beg off.)
>>>>
>>>>Yes, I know it sounds like I'm OCD, but please help me if you can!
>>>
>
>
Phones Discussed Above
More Motorola v60C topics | Motorola Forum | Reviews |
Similar Threads
- Verizon
- alt.cellular.nokia
- alt.cellular.sprintpcs
- alt.cellular.verizon
- alt.cellular.verizon
Car parts shop
in Chit Chat