You can download the lastest "Phone_Link_Update.zip" from PalmOne. the
install the the driver for Motorola TP280i and the Standard
GSM phone plus
the Phone Link software itself into the palm.
First bond your E398/V600 with the Tungsten T.
Start the phone link from your palm first select the phone
Click on the box under the Phone Connections:
then Next
Manufacturer: Motorola
Model:TP280i
then Next
Via: Bluetooth
(put your E398/V600 into BT findme mode)
then Next
If your phone displayed on the palm, select it
then Next
then Next again
Enter the passkey, just any number say 0000
On your phone say yes and put 0000
then Next and Done
the Click on the box under the network service:
then next
then next again if you are using the
GPRS service
Slelect the country and the ISP
then next and done
When you check the Preferences and connections you will found two entries
One is with you E398/V600's BT name
the other is LAN+your E398/V600's BT name
and you also can found a entry for your ISP in the Perferences -> Network
which is the same as the ISP you choose before and you can use this to
connnect to the internet already.
You can access the Internet via the E398/V600
Then back to connection
Create a entry
Name BT to Motorola E398/V600
Connect to Phone
Via Blurtooth
Device (your E398/V600's blue tooth name)
Model Standard
GSM
then click details...
put the speed 19200bps
Init string E1&C1&D0X1S7=99+CMEE=1;+CSCS="
GSM";V1
then click okay then okay again,
If the palm asked to use this phone as default, click yes.
Then you can use the
SMS and Dialer to access your phone.
Linear Mode
