Palm Tungsten and v600 via bluetooth for sms send recieve and emails a solution

You can download the lastest "Phone_Link_Update.zip" from PalmOne. the
install the the driver for Motorola TP280i and the Standard GSM phone plus
the Phone Link software itself into the palm.

First bond your E398/V600 with the Tungsten T.

Start the phone link from your palm first select the phone

Click on the box under the Phone Connections:

then Next

Manufacturer: Motorola
Model:TP280i

then Next

Via: Bluetooth

(put your E398/V600 into BT findme mode)

then Next

If your phone displayed on the palm, select it

then Next

then Next again

Enter the passkey, just any number say 0000

On your phone say yes and put 0000

then Next and Done

the Click on the box under the network service:

then next

then next again if you are using the GPRS service

Slelect the country and the ISP

then next and done

When you check the Preferences and connections you will found two entries

One is with you E398/V600's BT name

the other is LAN+your E398/V600's BT name

and you also can found a entry for your ISP in the Perferences -> Network
which is the same as the ISP you choose before and you can use this to
connnect to the internet already.

You can access the Internet via the E398/V600

Then back to connection

Create a entry

Name BT to Motorola E398/V600

Connect to Phone
Via Blurtooth
Device (your E398/V600's blue tooth name)
Model Standard GSM

then click details...

put the speed 19200bps
Init string E1&C1&D0X1S7=99+CMEE=1;+CSCS="GSM";V1

then click okay then okay again,

If the palm asked to use this phone as default, click yes.

Then you can use the SMS and Dialer to access your phone.

http://www.vxxxstuff.com
"Avanti" <martin.collins@btinternet.com> wrote in message news:<aA6_c.96802$a66.33170@fe2.news.blueyonder.co.uk>...
> You can download the lastest "Phone_Link_Update.zip" from PalmOne. the
> install the the driver for Motorola TP280i and the Standard GSM phone plus
> the Phone Link software itself into the palm.
>
> First bond your E398/V600 with the Tungsten T.
>
> Start the phone link from your palm first select the phone
>
> Click on the box under the Phone Connections:
>
> then Next
>
> Manufacturer: Motorola
> Model:TP280i
>
> then Next
>
> Via: Bluetooth
>
> (put your E398/V600 into BT findme mode)
>
> then Next
>
> If your phone displayed on the palm, select it
>
> then Next
>
> then Next again
>
> Enter the passkey, just any number say 0000
>
> On your phone say yes and put 0000
>
> then Next and Done
>
> the Click on the box under the network service:
>
> then next
>
> then next again if you are using the GPRS service
>
> Slelect the country and the ISP
>
> then next and done
>
> When you check the Preferences and connections you will found two entries
>
> One is with you E398/V600's BT name
>
> the other is LAN+your E398/V600's BT name
>
> and you also can found a entry for your ISP in the Perferences -> Network
> which is the same as the ISP you choose before and you can use this to
> connnect to the internet already.
>
> You can access the Internet via the E398/V600
>
> Then back to connection
>
> Create a entry
>
> Name BT to Motorola E398/V600
>
> Connect to Phone
> Via Blurtooth
> Device (your E398/V600's blue tooth name)
> Model Standard GSM
>
> then click details...
>
> put the speed 19200bps
> Init string E1&C1&D0X1S7=99+CMEE=1;+CSCS="GSM";V1
>
> then click okay then okay again,
>
> If the palm asked to use this phone as default, click yes.
>
> Then you can use the SMS and Dialer to access your phone.

http://www.vxxxstuff.com
"Avanti" <martin.collins@btinternet.com> wrote in message news:<aA6_c.96802$a66.33170@fe2.news.blueyonder.co.uk>...
> You can download the lastest "Phone_Link_Update.zip" from PalmOne. the
> install the the driver for Motorola TP280i and the Standard GSM phone plus
> the Phone Link software itself into the palm.
>
> First bond your E398/V600 with the Tungsten T.
>
> Start the phone link from your palm first select the phone
>
> Click on the box under the Phone Connections:
>
> then Next
>
> Manufacturer: Motorola
> Model:TP280i
>
> then Next
>
> Via: Bluetooth
>
> (put your E398/V600 into BT findme mode)
>
> then Next
>
> If your phone displayed on the palm, select it
>
> then Next
>
> then Next again
>
> Enter the passkey, just any number say 0000
>
> On your phone say yes and put 0000
>
> then Next and Done
>
> the Click on the box under the network service:
>
> then next
>
> then next again if you are using the GPRS service
>
> Slelect the country and the ISP
>
> then next and done
>
> When you check the Preferences and connections you will found two entries
>
> One is with you E398/V600's BT name
>
> the other is LAN+your E398/V600's BT name
>
> and you also can found a entry for your ISP in the Perferences -> Network
> which is the same as the ISP you choose before and you can use this to
> connnect to the internet already.
>
> You can access the Internet via the E398/V600
>
> Then back to connection
>
> Create a entry
>
> Name BT to Motorola E398/V600
>
> Connect to Phone
> Via Blurtooth
> Device (your E398/V600's blue tooth name)
> Model Standard GSM
>
> then click details...
>
> put the speed 19200bps
> Init string E1&C1&D0X1S7=99+CMEE=1;+CSCS="GSM";V1
>
> then click okay then okay again,
>
> If the palm asked to use this phone as default, click yes.
>
> Then you can use the SMS and Dialer to access your phone.