Results 1 to 11 of 11
- 10-11-2004, 05:17 PM #1Herbert LeeGuest
Hi, I just got a V600 off eBay last week and somehow the
reception is very bad inside the building. (Only 1-2 bars)
and will suddenly drop to 0 and give me "no service". The
phone does work fine in open area. I have tried changing
with all network setting & so tried changing antenna but not
thing seem to help. Now my question is that possible I can
fix this problem with reflash the FW?
The FW currently running is TRIPLETS_G_0B.09.4AR
with Flex GI9V600000AA0E9
› See More: HELP: V600 with very low signal strenght : (
- 10-11-2004, 10:17 PM #2AnybodyGuest
Re: V600 with very low signal strenght : (
"Herbert Lee" <[email protected]> wrote in message
news:[email protected]...
> Hi, I just got a V600 off eBay last week and somehow the
> reception is very bad inside the building. (Only 1-2 bars)
> and will suddenly drop to 0 and give me "no service". The
> phone does work fine in open area. I have tried changing
> with all network setting & so tried changing antenna but not
> thing seem to help. Now my question is that possible I can
> fix this problem with reflash the FW?
>
> The FW currently running is TRIPLETS_G_0B.09.4AR
> with Flex GI9V600000AA0E9
Those are 2 of the most popular as it is, if you want try out the 45R
triplets (flash), and the SE...F9 flex I have used those and they have been
great.
- 10-11-2004, 10:17 PM #3AnybodyGuest
Re: V600 with very low signal strenght : (
"Herbert Lee" <[email protected]> wrote in message
news:[email protected]...
> Hi, I just got a V600 off eBay last week and somehow the
> reception is very bad inside the building. (Only 1-2 bars)
> and will suddenly drop to 0 and give me "no service". The
> phone does work fine in open area. I have tried changing
> with all network setting & so tried changing antenna but not
> thing seem to help. Now my question is that possible I can
> fix this problem with reflash the FW?
>
> The FW currently running is TRIPLETS_G_0B.09.4AR
> with Flex GI9V600000AA0E9
Those are 2 of the most popular as it is, if you want try out the 45R
triplets (flash), and the SE...F9 flex I have used those and they have been
great.
- 10-11-2004, 10:55 PM #4Herbert LeeGuest
Re: V600 with very low signal strenght : (
Already tried reflash it with both TRIPLETS_G_0B.09.4AR.4AR
and TRIPLETS_G_0B.09.45R but doesn't improve the signal
strenght at all. Basically I just can use the phone indoor.
I am using Rogers AT&T and it sometime even tell me only
Fido available when I am inside the building??? Not sure
where to get the SE..F9 flex though and didn't the flex only
change the interface??? So can I send it back to Motorola
for service? I still can't believe the signal will be so
weak for such expensive
phone???
>On Tue, 12 Oct 2004 00:17:40 -0400, "Anybody" <[email protected]> wrote:
>
>"Herbert Lee" <[email protected]> wrote in message
>news:[email protected]...
>> Hi, I just got a V600 off eBay last week and somehow the
>> reception is very bad inside the building. (Only 1-2 bars)
>> and will suddenly drop to 0 and give me "no service". The
>> phone does work fine in open area. I have tried changing
>> with all network setting & so tried changing antenna but not
>> thing seem to help. Now my question is that possible I can
>> fix this problem with reflash the FW?
>>
>> The FW currently running is TRIPLETS_G_0B.09.4AR
>> with Flex GI9V600000AA0E9
>
>Those are 2 of the most popular as it is, if you want try out the 45R
>triplets (flash), and the SE...F9 flex I have used those and they have been
>great.
>
- 10-11-2004, 10:55 PM #5Herbert LeeGuest
Re: V600 with very low signal strenght : (
Already tried reflash it with both TRIPLETS_G_0B.09.4AR.4AR
and TRIPLETS_G_0B.09.45R but doesn't improve the signal
strenght at all. Basically I just can use the phone indoor.
I am using Rogers AT&T and it sometime even tell me only
Fido available when I am inside the building??? Not sure
where to get the SE..F9 flex though and didn't the flex only
change the interface??? So can I send it back to Motorola
for service? I still can't believe the signal will be so
weak for such expensive
phone???
>On Tue, 12 Oct 2004 00:17:40 -0400, "Anybody" <[email protected]> wrote:
>
>"Herbert Lee" <[email protected]> wrote in message
>news:[email protected]...
>> Hi, I just got a V600 off eBay last week and somehow the
>> reception is very bad inside the building. (Only 1-2 bars)
>> and will suddenly drop to 0 and give me "no service". The
>> phone does work fine in open area. I have tried changing
>> with all network setting & so tried changing antenna but not
>> thing seem to help. Now my question is that possible I can
>> fix this problem with reflash the FW?
>>
>> The FW currently running is TRIPLETS_G_0B.09.4AR
>> with Flex GI9V600000AA0E9
>
>Those are 2 of the most popular as it is, if you want try out the 45R
>triplets (flash), and the SE...F9 flex I have used those and they have been
>great.
>
- 10-12-2004, 03:16 PM #6AnybodyGuest
Re: V600 with very low signal strenght : (
Don't know man, my V300 whether flashed to v600 or not works in most
buildings, but not all. Maybe it is just the building itself, due to the
materials used? Or do you have this problem inside anywhere?
You can get F9 at www.vxxxstuff.com and ya, it does more then just the
interface as far as I know. Keep in mind to back up and to re-enter the
Rogers settings.
"Herbert Lee" <[email protected]> wrote in message
news:[email protected]...
> Already tried reflash it with both TRIPLETS_G_0B.09.4AR.4AR
> and TRIPLETS_G_0B.09.45R but doesn't improve the signal
> strenght at all. Basically I just can use the phone indoor.
> I am using Rogers AT&T and it sometime even tell me only
> Fido available when I am inside the building??? Not sure
> where to get the SE..F9 flex though and didn't the flex only
> change the interface??? So can I send it back to Motorola
> for service? I still can't believe the signal will be so
> weak for such expensive
> phone???
>
>
> >On Tue, 12 Oct 2004 00:17:40 -0400, "Anybody" <[email protected]>
wrote:
>
> >
> >"Herbert Lee" <[email protected]> wrote in message
> >news:[email protected]...
> >> Hi, I just got a V600 off eBay last week and somehow the
> >> reception is very bad inside the building. (Only 1-2 bars)
> >> and will suddenly drop to 0 and give me "no service". The
> >> phone does work fine in open area. I have tried changing
> >> with all network setting & so tried changing antenna but not
> >> thing seem to help. Now my question is that possible I can
> >> fix this problem with reflash the FW?
> >>
> >> The FW currently running is TRIPLETS_G_0B.09.4AR
> >> with Flex GI9V600000AA0E9
> >
> >Those are 2 of the most popular as it is, if you want try out the 45R
> >triplets (flash), and the SE...F9 flex I have used those and they have
been
> >great.
> >
>
- 10-12-2004, 03:16 PM #7AnybodyGuest
Re: V600 with very low signal strenght : (
Don't know man, my V300 whether flashed to v600 or not works in most
buildings, but not all. Maybe it is just the building itself, due to the
materials used? Or do you have this problem inside anywhere?
You can get F9 at www.vxxxstuff.com and ya, it does more then just the
interface as far as I know. Keep in mind to back up and to re-enter the
Rogers settings.
"Herbert Lee" <[email protected]> wrote in message
news:[email protected]...
> Already tried reflash it with both TRIPLETS_G_0B.09.4AR.4AR
> and TRIPLETS_G_0B.09.45R but doesn't improve the signal
> strenght at all. Basically I just can use the phone indoor.
> I am using Rogers AT&T and it sometime even tell me only
> Fido available when I am inside the building??? Not sure
> where to get the SE..F9 flex though and didn't the flex only
> change the interface??? So can I send it back to Motorola
> for service? I still can't believe the signal will be so
> weak for such expensive
> phone???
>
>
> >On Tue, 12 Oct 2004 00:17:40 -0400, "Anybody" <[email protected]>
wrote:
>
> >
> >"Herbert Lee" <[email protected]> wrote in message
> >news:[email protected]...
> >> Hi, I just got a V600 off eBay last week and somehow the
> >> reception is very bad inside the building. (Only 1-2 bars)
> >> and will suddenly drop to 0 and give me "no service". The
> >> phone does work fine in open area. I have tried changing
> >> with all network setting & so tried changing antenna but not
> >> thing seem to help. Now my question is that possible I can
> >> fix this problem with reflash the FW?
> >>
> >> The FW currently running is TRIPLETS_G_0B.09.4AR
> >> with Flex GI9V600000AA0E9
> >
> >Those are 2 of the most popular as it is, if you want try out the 45R
> >triplets (flash), and the SE...F9 flex I have used those and they have
been
> >great.
> >
>
- 10-12-2004, 06:03 PM #8Herbert LeeGuest
Re: V600 with very low signal strenght : (
Well, it's kind of hard to believe I spend so much for a phone and now it's not
working in most building... Well, the phone basically work fine outside and
in some building but most of the time only have 2-3 bar when using inside and
yet it will sometime drop to 0-1 bar and I'will lost the carrier. The signal
just not stable and I wonder what else I can set : ( By the way, I have one
more question now. I have no problem to received SMS message but can't seem to
send it out??? I already manually set the phone number but what else I need set
in order to get the SMS to work?
PS I really appreciate you spending the time to help me!
On Tue, 12 Oct 2004 17:16:41 -0400, "Anybody" <[email protected]> wrote:
>Don't know man, my V300 whether flashed to v600 or not works in most
>buildings, but not all. Maybe it is just the building itself, due to the
>materials used? Or do you have this problem inside anywhere?
>You can get F9 at www.vxxxstuff.com and ya, it does more then just the
>interface as far as I know. Keep in mind to back up and to re-enter the
>Rogers settings.
>"Herbert Lee" <[email protected]> wrote in message
>news:[email protected]...
>> Already tried reflash it with both TRIPLETS_G_0B.09.4AR.4AR
>> and TRIPLETS_G_0B.09.45R but doesn't improve the signal
>> strenght at all. Basically I just can use the phone indoor.
>> I am using Rogers AT&T and it sometime even tell me only
>> Fido available when I am inside the building??? Not sure
>> where to get the SE..F9 flex though and didn't the flex only
>> change the interface??? So can I send it back to Motorola
>> for service? I still can't believe the signal will be so
>> weak for such expensive
>> phone???
>>
>>
>> >On Tue, 12 Oct 2004 00:17:40 -0400, "Anybody" <[email protected]>
>wrote:
>>
>> >
>> >"Herbert Lee" <[email protected]> wrote in message
>> >news:[email protected]...
>> >> Hi, I just got a V600 off eBay last week and somehow the
>> >> reception is very bad inside the building. (Only 1-2 bars)
>> >> and will suddenly drop to 0 and give me "no service". The
>> >> phone does work fine in open area. I have tried changing
>> >> with all network setting & so tried changing antenna but not
>> >> thing seem to help. Now my question is that possible I can
>> >> fix this problem with reflash the FW?
>> >>
>> >> The FW currently running is TRIPLETS_G_0B.09.4AR
>> >> with Flex GI9V600000AA0E9
>> >
>> >Those are 2 of the most popular as it is, if you want try out the 45R
>> >triplets (flash), and the SE...F9 flex I have used those and they have
>been
>> >great.
>> >
>>
>
- 10-12-2004, 06:03 PM #9Herbert LeeGuest
Re: V600 with very low signal strenght : (
Well, it's kind of hard to believe I spend so much for a phone and now it's not
working in most building... Well, the phone basically work fine outside and
in some building but most of the time only have 2-3 bar when using inside and
yet it will sometime drop to 0-1 bar and I'will lost the carrier. The signal
just not stable and I wonder what else I can set : ( By the way, I have one
more question now. I have no problem to received SMS message but can't seem to
send it out??? I already manually set the phone number but what else I need set
in order to get the SMS to work?
PS I really appreciate you spending the time to help me!
On Tue, 12 Oct 2004 17:16:41 -0400, "Anybody" <[email protected]> wrote:
>Don't know man, my V300 whether flashed to v600 or not works in most
>buildings, but not all. Maybe it is just the building itself, due to the
>materials used? Or do you have this problem inside anywhere?
>You can get F9 at www.vxxxstuff.com and ya, it does more then just the
>interface as far as I know. Keep in mind to back up and to re-enter the
>Rogers settings.
>"Herbert Lee" <[email protected]> wrote in message
>news:[email protected]...
>> Already tried reflash it with both TRIPLETS_G_0B.09.4AR.4AR
>> and TRIPLETS_G_0B.09.45R but doesn't improve the signal
>> strenght at all. Basically I just can use the phone indoor.
>> I am using Rogers AT&T and it sometime even tell me only
>> Fido available when I am inside the building??? Not sure
>> where to get the SE..F9 flex though and didn't the flex only
>> change the interface??? So can I send it back to Motorola
>> for service? I still can't believe the signal will be so
>> weak for such expensive
>> phone???
>>
>>
>> >On Tue, 12 Oct 2004 00:17:40 -0400, "Anybody" <[email protected]>
>wrote:
>>
>> >
>> >"Herbert Lee" <[email protected]> wrote in message
>> >news:[email protected]...
>> >> Hi, I just got a V600 off eBay last week and somehow the
>> >> reception is very bad inside the building. (Only 1-2 bars)
>> >> and will suddenly drop to 0 and give me "no service". The
>> >> phone does work fine in open area. I have tried changing
>> >> with all network setting & so tried changing antenna but not
>> >> thing seem to help. Now my question is that possible I can
>> >> fix this problem with reflash the FW?
>> >>
>> >> The FW currently running is TRIPLETS_G_0B.09.4AR
>> >> with Flex GI9V600000AA0E9
>> >
>> >Those are 2 of the most popular as it is, if you want try out the 45R
>> >triplets (flash), and the SE...F9 flex I have used those and they have
>been
>> >great.
>> >
>>
>
- 10-12-2004, 06:45 PM #10AnybodyGuest
Re: V600 with very low signal strenght : (
Could be that Rogers just has a bit of a crappy single where you are maybe.
Here are the settings I use for Rogers after a Flex, maybe you missed a
little something, or maybe not.
I had to call Rogers last week because there was something messed with me
not being able to send mms as well, I could send a regular text, but not a
picture or anything. They asked me to turn off my cell, resent a single
then all was well.
If these settings are all right, may want to call em up to be sure it isn't
on their end
Web Setup
Name:MMS Session
Homepage: http://picturemessaging.rogers.com
Service Type 1:WAP
Gateway IP1" 172.025.000.107
Port 1: 9201
Domain 1:
Service Type 2: WAP
Gateway IP 2: 172.025.000.107
Port 2: 9201
Domain 2:
DNS 1: 000.000.000.000
DNS 2: 000.000.000.000
Timeout: 15 minutes
CSD No. 1:
User Name 1:
Password 1:
Speed(Bps) 1: 9600
Line Type 1: Modem
CSD No.2:
User Name 2:
Password 2:
Speed(Bps) 2: 9600
Line Type 2: Modem
GPRS APN: media.com
User Name: media
Password: mda01
MMS Message Setup
Inbox View" Setup
Service Center No.: 1-705-796-9300
Sms alert On
Hide fields: Cc,Bcc,Priority
Autosignature:
Download: Automatic
Filter:
Expire After: 5 Days
Reply Type: MMS
Size Limit:None
Server Info:
apn: media.com
username: media
password: mda01
mms.gprs.rogers.com
ip 172.025.00.107
"Herbert Lee" <[email protected]> wrote in message
news:[email protected]...
> Well, it's kind of hard to believe I spend so much for a phone and now
it's not
> working in most building... Well, the phone basically work fine outside
and
> in some building but most of the time only have 2-3 bar when using inside
and
> yet it will sometime drop to 0-1 bar and I'will lost the carrier. The
signal
> just not stable and I wonder what else I can set : ( By the way, I have
one
> more question now. I have no problem to received SMS message but can't
seem to
> send it out??? I already manually set the phone number but what else I
need set
> in order to get the SMS to work?
>
> PS I really appreciate you spending the time to help me!
>
>
>
> On Tue, 12 Oct 2004 17:16:41 -0400, "Anybody" <[email protected]>
wrote:
>
> >Don't know man, my V300 whether flashed to v600 or not works in most
> >buildings, but not all. Maybe it is just the building itself, due to the
> >materials used? Or do you have this problem inside anywhere?
> >You can get F9 at www.vxxxstuff.com and ya, it does more then just the
> >interface as far as I know. Keep in mind to back up and to re-enter the
> >Rogers settings.
> >"Herbert Lee" <[email protected]> wrote in message
> >news:[email protected]...
> >> Already tried reflash it with both TRIPLETS_G_0B.09.4AR.4AR
> >> and TRIPLETS_G_0B.09.45R but doesn't improve the signal
> >> strenght at all. Basically I just can use the phone indoor.
> >> I am using Rogers AT&T and it sometime even tell me only
> >> Fido available when I am inside the building??? Not sure
> >> where to get the SE..F9 flex though and didn't the flex only
> >> change the interface??? So can I send it back to Motorola
> >> for service? I still can't believe the signal will be so
> >> weak for such expensive
> >> phone???
> >>
> >>
> >> >On Tue, 12 Oct 2004 00:17:40 -0400, "Anybody" <[email protected]>
> >wrote:
> >>
> >> >
> >> >"Herbert Lee" <[email protected]> wrote in message
> >> >news:[email protected]...
> >> >> Hi, I just got a V600 off eBay last week and somehow the
> >> >> reception is very bad inside the building. (Only 1-2 bars)
> >> >> and will suddenly drop to 0 and give me "no service". The
> >> >> phone does work fine in open area. I have tried changing
> >> >> with all network setting & so tried changing antenna but not
> >> >> thing seem to help. Now my question is that possible I can
> >> >> fix this problem with reflash the FW?
> >> >>
> >> >> The FW currently running is TRIPLETS_G_0B.09.4AR
> >> >> with Flex GI9V600000AA0E9
> >> >
> >> >Those are 2 of the most popular as it is, if you want try out the 45R
> >> >triplets (flash), and the SE...F9 flex I have used those and they have
> >been
> >> >great.
> >> >
> >>
> >
>
- 10-12-2004, 06:45 PM #11AnybodyGuest
Re: V600 with very low signal strenght : (
Could be that Rogers just has a bit of a crappy single where you are maybe.
Here are the settings I use for Rogers after a Flex, maybe you missed a
little something, or maybe not.
I had to call Rogers last week because there was something messed with me
not being able to send mms as well, I could send a regular text, but not a
picture or anything. They asked me to turn off my cell, resent a single
then all was well.
If these settings are all right, may want to call em up to be sure it isn't
on their end
Web Setup
Name:MMS Session
Homepage: http://picturemessaging.rogers.com
Service Type 1:WAP
Gateway IP1" 172.025.000.107
Port 1: 9201
Domain 1:
Service Type 2: WAP
Gateway IP 2: 172.025.000.107
Port 2: 9201
Domain 2:
DNS 1: 000.000.000.000
DNS 2: 000.000.000.000
Timeout: 15 minutes
CSD No. 1:
User Name 1:
Password 1:
Speed(Bps) 1: 9600
Line Type 1: Modem
CSD No.2:
User Name 2:
Password 2:
Speed(Bps) 2: 9600
Line Type 2: Modem
GPRS APN: media.com
User Name: media
Password: mda01
MMS Message Setup
Inbox View" Setup
Service Center No.: 1-705-796-9300
Sms alert On
Hide fields: Cc,Bcc,Priority
Autosignature:
Download: Automatic
Filter:
Expire After: 5 Days
Reply Type: MMS
Size Limit:None
Server Info:
apn: media.com
username: media
password: mda01
mms.gprs.rogers.com
ip 172.025.00.107
"Herbert Lee" <[email protected]> wrote in message
news:[email protected]...
> Well, it's kind of hard to believe I spend so much for a phone and now
it's not
> working in most building... Well, the phone basically work fine outside
and
> in some building but most of the time only have 2-3 bar when using inside
and
> yet it will sometime drop to 0-1 bar and I'will lost the carrier. The
signal
> just not stable and I wonder what else I can set : ( By the way, I have
one
> more question now. I have no problem to received SMS message but can't
seem to
> send it out??? I already manually set the phone number but what else I
need set
> in order to get the SMS to work?
>
> PS I really appreciate you spending the time to help me!
>
>
>
> On Tue, 12 Oct 2004 17:16:41 -0400, "Anybody" <[email protected]>
wrote:
>
> >Don't know man, my V300 whether flashed to v600 or not works in most
> >buildings, but not all. Maybe it is just the building itself, due to the
> >materials used? Or do you have this problem inside anywhere?
> >You can get F9 at www.vxxxstuff.com and ya, it does more then just the
> >interface as far as I know. Keep in mind to back up and to re-enter the
> >Rogers settings.
> >"Herbert Lee" <[email protected]> wrote in message
> >news:[email protected]...
> >> Already tried reflash it with both TRIPLETS_G_0B.09.4AR.4AR
> >> and TRIPLETS_G_0B.09.45R but doesn't improve the signal
> >> strenght at all. Basically I just can use the phone indoor.
> >> I am using Rogers AT&T and it sometime even tell me only
> >> Fido available when I am inside the building??? Not sure
> >> where to get the SE..F9 flex though and didn't the flex only
> >> change the interface??? So can I send it back to Motorola
> >> for service? I still can't believe the signal will be so
> >> weak for such expensive
> >> phone???
> >>
> >>
> >> >On Tue, 12 Oct 2004 00:17:40 -0400, "Anybody" <[email protected]>
> >wrote:
> >>
> >> >
> >> >"Herbert Lee" <[email protected]> wrote in message
> >> >news:[email protected]...
> >> >> Hi, I just got a V600 off eBay last week and somehow the
> >> >> reception is very bad inside the building. (Only 1-2 bars)
> >> >> and will suddenly drop to 0 and give me "no service". The
> >> >> phone does work fine in open area. I have tried changing
> >> >> with all network setting & so tried changing antenna but not
> >> >> thing seem to help. Now my question is that possible I can
> >> >> fix this problem with reflash the FW?
> >> >>
> >> >> The FW currently running is TRIPLETS_G_0B.09.4AR
> >> >> with Flex GI9V600000AA0E9
> >> >
> >> >Those are 2 of the most popular as it is, if you want try out the 45R
> >> >triplets (flash), and the SE...F9 flex I have used those and they have
> >been
> >> >great.
> >> >
> >>
> >
>
Phones Discussed Above
More Motorola v600 topics | Motorola Forum | Reviews |
Similar Threads
- alt.cellular.verizon
- alt.cellular.verizon
- Motorola
- Motorola
- alt.cellular.ericsson
Automóviles para empresas
in Chit Chat