Results 1 to 9 of 9
- 11-29-2005, 02:34 PM #1SiGuest
I've installed Mobile Phone Tools and connected my phone to the USB socket
but all I get is "Initialising Modem" and "Please Wait". I have to confess
this is all new to me so if some kind soul could run me through what I'm
supposed to do I would really appreciate it.
Cheers.
Si
--
It denos't mtater waht oredr the ltteers in a wrod are, it's olny iprmoatnt
taht the frist and lsat ltteer be at the rghit pclae.The rset can be a total
mses and you can sitll raed it wouthit porbelm.Tihs is bcuseae the huamn
mnid deos not raed ervey lteter by istlef, but the wrod as a wlohe.
› See More: Need Help Hooking Up V3 to PC
- 11-29-2005, 04:49 PM #2Dale WhiteGuest
Re: Need Help Hooking Up V3 to PC
Which version of Phone tools are you using. The latest build is something
like 3.28x
Though I started with version 3.11 with my Razr. I had to fight a bit with
my PC to get it to play right with my phone when I plugged it in. If you
have already reboot your PC with the phone plugged in. You should see it go
to a charging stage when it's plugged in and windows is up, but Phone Tools
didn't want to play until I booted with the phone plugged in.
I believe the Key was for windows to load it's drivers for the phone the
first time. Since doing that series of steps, Phone tools works just fine on
the 3 PCs I run it on.
"Si" <[email protected]> wrote in message
news:[email protected]...
> I've installed Mobile Phone Tools and connected my phone to the USB socket
> but all I get is "Initialising Modem" and "Please Wait". I have to confess
> this is all new to me so if some kind soul could run me through what I'm
> supposed to do I would really appreciate it.
>
> Cheers.
>
> Si
>
>
> --
> It denos't mtater waht oredr the ltteers in a wrod are, it's olny
> iprmoatnt taht the frist and lsat ltteer be at the rghit pclae.The rset
> can be a total mses and you can sitll raed it wouthit porbelm.Tihs is
> bcuseae the huamn mnid deos not raed ervey lteter by istlef, but the wrod
> as a wlohe.
>
>
- 11-29-2005, 05:54 PM #3libelulGuest
Converting songs to ringtones V815 or V710
Can anyone offer any assistance.
My brother's got a Razor and he's able to assign different songs as
ringtones when people call.
I've got a V815 and when I ask for a ringtone, all I get is a set of
short nothings that the phone came with.
How can I attach files (via the Trans Flash) to be used as ringtones ?
Thanks
Doug
- 12-01-2005, 05:20 AM #4Guest
Re: Converting songs to ringtones V815 or V710
If you want to assign ringtones to some specific person , store that
person's information in phone instead of SIM. Go to phone book, press
hte central (option) button of your mobile, go to 'edit' and then
assign ringtone.
I hope this will work ...if you feel any problem send me an email
[email protected]
Good Luck !
- 12-01-2005, 05:25 AM #5Guest
Re: Need Help Hooking Up V3 to PC
Hi,
First install the software .. .when it asks for the driver ,, insert
your CD_ROM and let your PC configure your mobile. When it stucks at
initialization ...pull out the cable from your V3 and insert again. It
will work.
Good Luck
Junaid
- 12-02-2005, 05:01 AM #6AshGuest
Re: Converting songs to ringtones V815 or V710
The songs can be put on the transflash card, but in order to use them
as ring tones, they must be transfered from the card to the phone's
internal memory
- 12-02-2005, 08:12 PM #7just meGuest
Re: Converting songs to ringtones V815 or V710
and how do you do that?
thanks
On 2 Dec 2005 03:01:55 -0800, "Ash" <[email protected]> wrote:
>The songs can be put on the transflash card, but in order to use them
>as ring tones, they must be transfered from the card to the phone's
>internal memory
- 12-03-2005, 06:18 AM #8AshGuest
Re: Converting songs to ringtones V815 or V710
go to media gallery, and then into your sounds. Make sure that you're
looking at the sounds on the flash card. press the "0" (zero) button
while highlighting a song to select it. Then, after selecting as many
songs as you want to transfer to the phone, hit menu, then select "move
marked files". I glad I could help, but next time, just rtfm
- 12-04-2005, 02:48 PM #9CharlesHGuest
Re: Converting songs to ringtones V815 or V710
Ash wrote:
> go to media gallery, and then into your sounds. Make sure that you're
> looking at the sounds on the flash card. press the "0" (zero) button
> while highlighting a song to select it. Then, after selecting as many
> songs as you want to transfer to the phone, hit menu, then select "move
> marked files". I glad I could help, but next time, just rtfm
If you have the Verizon Wireless software in the 710/815, the "Move"
menu item of audio files from Transflash to phone memory has been
removed. To move audio files from TF to phone memory, you either:
1) Do the seem edit to re-enable that menu item.
2) Compose a PIX message to an invalid number (say, 555-555-5555),
attach the audio file from the TF card, and send it. The send fails, but
now the message is in the Outbox, from which you can save it as a
ringtone or in the phone memory.
Similar Threads
- Motorola
- alt.cellular.verizon
- alt.cellular.motorola
- alt.cellular.nokia
- alt.cellular.ericsson
The Ukrainian Review
in Chit Chat