Nokia 6600 + Bluetooth + PC Suite

Hi,
I tried for hours getting this to work, would be cool if someone could help
me.
I bought the D-Link DBT-120 Bluetooth USB stick. Plugged it in, installed
the Widcomm Bluetooth software and Nokia PC Suite for the 6600.
I also managed to set up the serial port connection. mRouter in the Task
Bar is green/blue instead of grey, when doubleclicking it says "Bluetooth
COM3 Connected".
However, I can't get PC Suite to work. When launching PC Suite, there's a
window "Welcome to PC Suite", in which it says to attach the 6600 and press
OK to continue. When I click OK, nothing happens. The empty PC Suite window
stays open, in the lower right corner it says "(Offline) Disconnected". At
the same time, mRouter says "Connected".
How can I get PC Suite to recognize the mobile?

Thanks,
Marian

---

› See More: Nokia 6600 + Bluetooth + PC Suite

sounds to me like the bluetooth software com port is different than what
mrouter thinks it should be, and also try setting the serial port to a
higher com port,

Com 3 sounds weird....

For example my Serial Port Com is assigned Com 6 and in mrouter Com 6 is
ticked.

And it sounds like you installed PC suite b4 the bluetooth software...remove
both and install Bluetooth first, then PC Suite and it would be a good idea
if you connect the 6600 with bluetooth b4 installing PC Suite so it can
recognise it during the install process.

cheers

"Marian Rainer-Harbach" <[email protected]> wrote in message
news:[email protected]...
> Hi,
> I tried for hours getting this to work, would be cool if someone could
help
> me.
> I bought the D-Link DBT-120 Bluetooth USB stick. Plugged it in, installed
> the Widcomm Bluetooth software and Nokia PC Suite for the 6600.
> I also managed to set up the serial port connection. mRouter in the Task
> Bar is green/blue instead of grey, when doubleclicking it says "Bluetooth
> COM3 Connected".
> However, I can't get PC Suite to work. When launching PC Suite, there's a
> window "Welcome to PC Suite", in which it says to attach the 6600 and
press
> OK to continue. When I click OK, nothing happens. The empty PC Suite
window
> stays open, in the lower right corner it says "(Offline) Disconnected". At
> the same time, mRouter says "Connected".
> How can I get PC Suite to recognize the mobile?
>
> Thanks,
> Marian
>

You need to tick Com 4 in mRouter for DLink. You can access by doubling
clicking on grey icon in system tray which looks like two separated
triangles at an angle when disconnected.

a_dude is right about your install order. PC Suite is pretty picky in the
install. BT software/adapter first, then pair or bond, connect pc/phone via
serial port & THEN start PC Suite.

This forum has very good guides on Bluetooth devices and setup. Go to the
BT guides section:

www.geekzone.co.nz

Cheers

"a_dude" <[email protected]> wrote in message
news:[email protected]...
> sounds to me like the bluetooth software com port is different than what
> mrouter thinks it should be, and also try setting the serial port to a
> higher com port,
>
> Com 3 sounds weird....
>
> For example my Serial Port Com is assigned Com 6 and in mrouter Com 6 is
> ticked.
>
> And it sounds like you installed PC suite b4 the bluetooth
software...remove
> both and install Bluetooth first, then PC Suite and it would be a good
idea
> if you connect the 6600 with bluetooth b4 installing PC Suite so it can
> recognise it during the install process.
>
> cheers
>
> "Marian Rainer-Harbach" <[email protected]> wrote in message
> news:[email protected]...
> > Hi,
> > I tried for hours getting this to work, would be cool if someone could
> help
> > me.
> > I bought the D-Link DBT-120 Bluetooth USB stick. Plugged it in,
installed
> > the Widcomm Bluetooth software and Nokia PC Suite for the 6600.
> > I also managed to set up the serial port connection. mRouter in the Task
> > Bar is green/blue instead of grey, when doubleclicking it says
"Bluetooth
> > COM3 Connected".
> > However, I can't get PC Suite to work. When launching PC Suite, there's
a
> > window "Welcome to PC Suite", in which it says to attach the 6600 and
> press
> > OK to continue. When I click OK, nothing happens. The empty PC Suite
> window
> > stays open, in the lower right corner it says "(Offline) Disconnected".
At
> > the same time, mRouter says "Connected".
> > How can I get PC Suite to recognize the mobile?
> >
> > Thanks,
> > Marian
> >
>
>