Results 1 to 2 of 2
  1. #1
    JD Cooley
    Guest
    Wireless FAQ (Revision A.4) Revised July, 2004

    This FAQ is posted once per month around the 1st of the month to the
    following Usenet Newsgroups:

    alt.cellular
    alt.cellular-phone-tech
    alt.cellular.tech
    sdnet.wireless.pcs
    alt.cellular.sprintpcs
    alt.cellular.verizon
    alt.cellular.gsm.carriers.voicestream


    This FAQ is also available at:
    http://www.dvv.ru/stuff/WirelessFAQ.txt

    http://www.wirelessadvisor.com/wireless_faq.cfm
    http://www.Lanpaq.com

    Changes in this revision:

    Removed most Carrier names and services. This changes often and
    even the names of the Carriers change!

    Added the GSM equivalent to ESN on A. 1.6.

    Send all corrections/additions/suggestions to [email protected].
    If you would like to have this FAQ e-mailed to you each month, if it
    has changed, send your request to J. D. Cooley at the above address.

    This FAQ will concentrate on the wireless systems used in the United
    States, especially digital systems.

    I do not read all the newsgroups that this FAQ may be posted to, so
    please
    send e-mail to me rather than post suggestions to the newsgroups. Some
    of
    the answers were given in different newsgroups or taken from different
    Web
    pages and not necessarily confirmed by me. Please don't blame me for
    any
    errors, just send me the correct information!

    PLEASE NOTE: I will not knowingly include any "secret codes", hacking
    information, nor any URLs pointing to any of those.

    I GENERAL QUESTIONS

    Q 1.1 What is AMPS?

    A 1.1 The Advanced Mobile Phone System (AMPS) is the analog system
    used
    in the United States for cellular telephones. It uses Frequency
    Modulation
    (FM). AMPS uses the FDMA air interface. The channels are 30Khz wide.
    The
    frequency band for AMPS is 824Mhz to 849Mhz and 869Mhz to 894Mhz.

    Q1.2 What is GSM?

    A1.2 GSM was established in 1982 as a European standard for digital
    wireless communications. The first system was on line in 1991. GSM is
    now used in many countries around the world. The original name was
    Groupe Spécial Mobile, but now the most accepted name is Global System
    for Mobile Communications. GSM uses a combination of FDMA and TDMA.

    FDMA: The 25Mhz-wide band is divided into 124 frequencies of 200Khz
    each.
    One or more of those frequencies are assigned to each base station.

    TDMA: Each of those frequencies uses 8 time slots.

    Q 1.3 What is TDMA?

    A 1.3 Time Division Multiple Access is an air interface that allows
    mobile
    stations to use the same frequency, but are separated by time slots.

    Q 1.4 What is CDMA?

    A 1.4 Code Division Multiple Access is an air interface that allows
    mobile
    stations to use the same frequency, but are separated by unique
    digital
    codes. CDMA uses spread spectrum techniques. The standard (IS-95) was
    published by the Telecommunications Industry Association (TIA) in
    July,
    1993 and revised to IS-95A in May, 1995. The channels are
    approximately 1.25Mhz wide.

    Q 1.4a What is the difference between TDMA and CDMA?

    A 1.4a (Credit: Steve Punter)
    The first thing you have to learn is that "TDMA" is used frequently as
    a
    direct reference to IS-136. This is an ambiguous reference, since
    there
    are actually three technologies that presently use a form of Time
    Division
    Multiple Access. Be careful when talking with people who use TDMA in
    this way.

    As you have already guessed, the main difference between TDMA and CDMA
    is
    how they share the spectrum. TDMA does so by assigning each user on a
    channel a different "slot" in time. IS-136 and iDEN have 3 slots per
    channel, while GSM has 8 slots per channel. Note that a GSM channel is
    much
    wider than an IS-136 or iDEN channel. Each user "takes turns"
    transmitting
    and receiving in their designated time slot.

    CDMA on the other hand has everyone on the channel transmitting and
    receiving AT THE SAME TIME. Conventional wisdom would lead you to
    believe
    this is impossible, but it works because of a modulation technique
    known as
    Spread Spectrum. A CDMA channel is very wide (1.25 Mhz actually). Each
    user
    is only transmitting a small amount of data, which would normally fit
    well
    into a much smaller (narrow) channel. What the transmitter does is to
    take
    this small number of bits and spread it out over the entire
    1.25Mhz-wide
    channel. It does so using an encoding technique that makes each user's
    bits
    interfere very little with everyone else's. The receiver's job is to
    "unspread" the bits and extract only the data from the desired user.

    Because this wide channel can accommodate many different people using
    it at
    the same time, the channel is said to have "soft capacity", since the
    upper
    limit on the number of users is determined strictly by how much
    interference
    a subscriber is willing to endure. Up to a certain point, the level of
    inter-user interference is well within the capability of the voice
    coding
    algorithm to correct. In a TDMA system, the capacity is "hard coded"
    by the
    number of slots allocated to a channel.

    CDMA also offers a unique feature known as "soft handoff". TDMA
    systems use
    what is known as a "hard handoff", since the connection with one site
    must
    be broken and then a new connection created. CDMA systems keep your
    call
    connected through 3 (the spec allows up to 6, but that isn't used)
    different
    sites. Your phone can pick and choose between these 3 sites at any
    time, and
    can in fact combine the signals from two or more sites at the same
    time.

    It would take volumes to go into the necessary detail required to
    explain
    the true differences. I therefore recommend you buy a book called
    "Wireless
    Personal Communications Systems" by David J. Goodman. It's an
    Addison-Wesley
    publication, and its ISBN number is 0-201-63470-8. This book is a
    marvelous
    source of information about the various technologies (excluding iDEN)
    used
    in North America.

    Q 1.5 What is PCS?

    A 1.5 The Federal Communications Commission (FCC) opened a new
    frequency
    band for digital phones and named the new service Personal
    Communication
    Services (PCS). The band is generally referred to as the 1900Mhz
    (1.9Ghz)
    band. The band is from 1850MHz to 1990MHz.

    Q 1.6 What is an ESN?

    A 1.6 The Electronic Serial Number is a 32-bit number that is stored
    in the
    phone. It is used, along with other numbers, to identify your phone.
    GSM
    equivalent would be the IMEI.

    Q 1.7 What is meant by dual-mode?

    A 1.7 A dual-mode phone operates on two modes. Usually this refers
    to
    phones that use digital and analog, however it also pertains to phones
    that
    operate on AMPS and N-AMPS.

    Q 1.8 What is a dual-band phone?

    A 1.8 A dual-band phone operates on the cellular band (800Mhz) and
    the
    PCS band (1900Mhz).

    [Questions 1.9, 1.10, and 1.11 deleted]

    Q 1.12 What is GSM1900?

    A 1.12 It is the GSM system used in the United States on the PCS
    band.

    Q 1.13 What is a SIM card?

    A 1.13 The SIM (Subscriber Identity Module) card is a "smart card"
    used by
    a subscriber to GSM. The card contains information about the user and
    can
    be plugged into another GSM phone. This allows the user to use
    another GSM
    phone as if it was his/her own phone.

    Q 1.14 What are the potential health hazards to using a portable
    wireless
    phone?

    A 1.14 The 'short' answer is that there is no known health hazards
    associated with the proper use of portable wireless phones. For more
    technical information on this subject go to http://www.fcc.gov/oet/.
    The Office of Engineering and Technology (OET) has a number of
    bulletins
    on the subject. The two that you want to start with are OET56 and
    OET65C.
    OET56 gives a lot of other references.

    Q 1.15 What is IRIDIUM? What is GlobalStar?

    A 1.15 The IRIDIUM and GlobalStar systems will use low earth orbit
    satellites for wireless communication. A special handset will allow
    the user
    to communicate via ground based cellular or by satellite. For the
    latest
    information see:
    http://www.iridium.com
    http://www.globalstar.com

    Q. 1.16 What is EVRC?

    A. 1.16 [Credit: Bill Walker]
    EVRC is the Enhanced Variable Rate Coder. It is an 8 kbps vocoder
    that's supposed to sound about as good as the current 13 kbps vocoder.
    Thus, you can have the same voice quality while improving the capacity
    of the system (which can handle more 8 kbps calls than 13 kbps calls.

    Q 1.17 What is 3G (3GP)?

    A 1.17 The short answer is:
    3G is a generic term covering a range of future wireless network
    technologies, including cdma2000, UMTS, GPRS, WCDMA, and EDGE.
    3G combines high-speed mobile access with Internet Protocol (IP) based
    services. This doesn't just mean fast mobile connection to the World
    Wide
    Web - by liberating us from slow connections, cumbersome equipment and
    immovable access points, 3G will enable new ways to communicate,
    access
    information, conduct business and learn.


    II TECHNICAL QUESTIONS

    Q 2.1 In CDMA what is meant by "slot cycle index"?

    A 2.1 [Credit: Bill Walker]
    On the CDMA Paging Channel (this is the shared channel that all phones
    listen to for incoming calls and other control info), time is divided
    into
    "slots". To conserve power, phones that are currently idle only "wake
    up"
    and listen for messages on the Paging Channel during their assigned
    slots. The slot cycle index determines how often the phone's slot
    comes
    around. If the slot cycle index is 0, the phone wakes up every 1.28
    seconds. If it's one, it wakes up every 2.56 seconds. If it's two,
    it's
    every 5.12 seconds, and so on. The larger the setting, the more power
    is
    conserved, but the longer it takes to page the phone for an incoming
    call. You can imagine that if it were set to 10.24 seconds, few
    callers
    would hang on the line long enough for you to answer your phone.

    There are two settings that govern this. One is the "preferred slot
    cycle
    index" in the phone, and can be set via service programming. The
    other is
    the "maximum slot cycle index" set in the base station and broadcast
    in
    overhead messages on the Paging Channel. The phone has to use
    whichever
    number is smaller.

    Q 2.2 What are the frequencies of the 800MHz and 1900MHZ channels?

    A 2.2 The receive (RX) and transmit (TX) frequencies for the mobile
    units are:
    CELLULAR

    CHANNEL RX TX
    1 870.030 825.030
    2 870.060 825.060
    3 870.090 825.090



    See More: Wireless FAQ (Rev. A.4)




  2. #2
    Ken
    Guest

    Re: Wireless FAQ (Rev. A.4)

    ?

    "JD Cooley" <[email protected]> wrote in message
    news:[email protected]...
    > Wireless FAQ (Revision A.4) Revised July, 2004
    >
    > This FAQ is posted once per month around the 1st of the month to the
    > following Usenet Newsgroups:
    >
    > alt.cellular
    > alt.cellular-phone-tech
    > alt.cellular.tech
    > sdnet.wireless.pcs
    > alt.cellular.sprintpcs
    > alt.cellular.verizon
    > alt.cellular.gsm.carriers.voicestream
    >
    >
    > This FAQ is also available at:
    > http://www.dvv.ru/stuff/WirelessFAQ.txt
    >
    > http://www.wirelessadvisor.com/wireless_faq.cfm
    > http://www.Lanpaq.com
    >
    > Changes in this revision:
    >
    > Removed most Carrier names and services. This changes often and
    > even the names of the Carriers change!
    >
    > Added the GSM equivalent to ESN on A. 1.6.
    >
    > Send all corrections/additions/suggestions to [email protected].
    > If you would like to have this FAQ e-mailed to you each month, if it
    > has changed, send your request to J. D. Cooley at the above address.
    >
    > This FAQ will concentrate on the wireless systems used in the United
    > States, especially digital systems.
    >
    > I do not read all the newsgroups that this FAQ may be posted to, so
    > please
    > send e-mail to me rather than post suggestions to the newsgroups. Some
    > of
    > the answers were given in different newsgroups or taken from different
    > Web
    > pages and not necessarily confirmed by me. Please don't blame me for
    > any
    > errors, just send me the correct information!
    >
    > PLEASE NOTE: I will not knowingly include any "secret codes", hacking
    > information, nor any URLs pointing to any of those.
    >
    > I GENERAL QUESTIONS
    >
    > Q 1.1 What is AMPS?
    >
    > A 1.1 The Advanced Mobile Phone System (AMPS) is the analog system
    > used
    > in the United States for cellular telephones. It uses Frequency
    > Modulation
    > (FM). AMPS uses the FDMA air interface. The channels are 30Khz wide.
    > The
    > frequency band for AMPS is 824Mhz to 849Mhz and 869Mhz to 894Mhz.
    >
    > Q1.2 What is GSM?
    >
    > A1.2 GSM was established in 1982 as a European standard for digital
    > wireless communications. The first system was on line in 1991. GSM is
    > now used in many countries around the world. The original name was
    > Groupe Spécial Mobile, but now the most accepted name is Global System
    > for Mobile Communications. GSM uses a combination of FDMA and TDMA.
    >
    > FDMA: The 25Mhz-wide band is divided into 124 frequencies of 200Khz
    > each.
    > One or more of those frequencies are assigned to each base station.
    >
    > TDMA: Each of those frequencies uses 8 time slots.
    >
    > Q 1.3 What is TDMA?
    >
    > A 1.3 Time Division Multiple Access is an air interface that allows
    > mobile
    > stations to use the same frequency, but are separated by time slots.
    >
    > Q 1.4 What is CDMA?
    >
    > A 1.4 Code Division Multiple Access is an air interface that allows
    > mobile
    > stations to use the same frequency, but are separated by unique
    > digital
    > codes. CDMA uses spread spectrum techniques. The standard (IS-95) was
    > published by the Telecommunications Industry Association (TIA) in
    > July,
    > 1993 and revised to IS-95A in May, 1995. The channels are
    > approximately 1.25Mhz wide.
    >
    > Q 1.4a What is the difference between TDMA and CDMA?
    >
    > A 1.4a (Credit: Steve Punter)
    > The first thing you have to learn is that "TDMA" is used frequently as
    > a
    > direct reference to IS-136. This is an ambiguous reference, since
    > there
    > are actually three technologies that presently use a form of Time
    > Division
    > Multiple Access. Be careful when talking with people who use TDMA in
    > this way.
    >
    > As you have already guessed, the main difference between TDMA and CDMA
    > is
    > how they share the spectrum. TDMA does so by assigning each user on a
    > channel a different "slot" in time. IS-136 and iDEN have 3 slots per
    > channel, while GSM has 8 slots per channel. Note that a GSM channel is
    > much
    > wider than an IS-136 or iDEN channel. Each user "takes turns"
    > transmitting
    > and receiving in their designated time slot.
    >
    > CDMA on the other hand has everyone on the channel transmitting and
    > receiving AT THE SAME TIME. Conventional wisdom would lead you to
    > believe
    > this is impossible, but it works because of a modulation technique
    > known as
    > Spread Spectrum. A CDMA channel is very wide (1.25 Mhz actually). Each
    > user
    > is only transmitting a small amount of data, which would normally fit
    > well
    > into a much smaller (narrow) channel. What the transmitter does is to
    > take
    > this small number of bits and spread it out over the entire
    > 1.25Mhz-wide
    > channel. It does so using an encoding technique that makes each user's
    > bits
    > interfere very little with everyone else's. The receiver's job is to
    > "unspread" the bits and extract only the data from the desired user.
    >
    > Because this wide channel can accommodate many different people using
    > it at
    > the same time, the channel is said to have "soft capacity", since the
    > upper
    > limit on the number of users is determined strictly by how much
    > interference
    > a subscriber is willing to endure. Up to a certain point, the level of
    > inter-user interference is well within the capability of the voice
    > coding
    > algorithm to correct. In a TDMA system, the capacity is "hard coded"
    > by the
    > number of slots allocated to a channel.
    >
    > CDMA also offers a unique feature known as "soft handoff". TDMA
    > systems use
    > what is known as a "hard handoff", since the connection with one site
    > must
    > be broken and then a new connection created. CDMA systems keep your
    > call
    > connected through 3 (the spec allows up to 6, but that isn't used)
    > different
    > sites. Your phone can pick and choose between these 3 sites at any
    > time, and
    > can in fact combine the signals from two or more sites at the same
    > time.
    >
    > It would take volumes to go into the necessary detail required to
    > explain
    > the true differences. I therefore recommend you buy a book called
    > "Wireless
    > Personal Communications Systems" by David J. Goodman. It's an
    > Addison-Wesley
    > publication, and its ISBN number is 0-201-63470-8. This book is a
    > marvelous
    > source of information about the various technologies (excluding iDEN)
    > used
    > in North America.
    >
    > Q 1.5 What is PCS?
    >
    > A 1.5 The Federal Communications Commission (FCC) opened a new
    > frequency
    > band for digital phones and named the new service Personal
    > Communication
    > Services (PCS). The band is generally referred to as the 1900Mhz
    > (1.9Ghz)
    > band. The band is from 1850MHz to 1990MHz.
    >
    > Q 1.6 What is an ESN?
    >
    > A 1.6 The Electronic Serial Number is a 32-bit number that is stored
    > in the
    > phone. It is used, along with other numbers, to identify your phone.
    > GSM
    > equivalent would be the IMEI.
    >
    > Q 1.7 What is meant by dual-mode?
    >
    > A 1.7 A dual-mode phone operates on two modes. Usually this refers
    > to
    > phones that use digital and analog, however it also pertains to phones
    > that
    > operate on AMPS and N-AMPS.
    >
    > Q 1.8 What is a dual-band phone?
    >
    > A 1.8 A dual-band phone operates on the cellular band (800Mhz) and
    > the
    > PCS band (1900Mhz).
    >
    > [Questions 1.9, 1.10, and 1.11 deleted]
    >
    > Q 1.12 What is GSM1900?
    >
    > A 1.12 It is the GSM system used in the United States on the PCS
    > band.
    >
    > Q 1.13 What is a SIM card?
    >
    > A 1.13 The SIM (Subscriber Identity Module) card is a "smart card"
    > used by
    > a subscriber to GSM. The card contains information about the user and
    > can
    > be plugged into another GSM phone. This allows the user to use
    > another GSM
    > phone as if it was his/her own phone.
    >
    > Q 1.14 What are the potential health hazards to using a portable
    > wireless
    > phone?
    >
    > A 1.14 The 'short' answer is that there is no known health hazards
    > associated with the proper use of portable wireless phones. For more
    > technical information on this subject go to http://www.fcc.gov/oet/.
    > The Office of Engineering and Technology (OET) has a number of
    > bulletins
    > on the subject. The two that you want to start with are OET56 and
    > OET65C.
    > OET56 gives a lot of other references.
    >
    > Q 1.15 What is IRIDIUM? What is GlobalStar?
    >
    > A 1.15 The IRIDIUM and GlobalStar systems will use low earth orbit
    > satellites for wireless communication. A special handset will allow
    > the user
    > to communicate via ground based cellular or by satellite. For the
    > latest
    > information see:
    > http://www.iridium.com
    > http://www.globalstar.com
    >
    > Q. 1.16 What is EVRC?
    >
    > A. 1.16 [Credit: Bill Walker]
    > EVRC is the Enhanced Variable Rate Coder. It is an 8 kbps vocoder
    > that's supposed to sound about as good as the current 13 kbps vocoder.
    > Thus, you can have the same voice quality while improving the capacity
    > of the system (which can handle more 8 kbps calls than 13 kbps calls.
    >
    > Q 1.17 What is 3G (3GP)?
    >
    > A 1.17 The short answer is:
    > 3G is a generic term covering a range of future wireless network
    > technologies, including cdma2000, UMTS, GPRS, WCDMA, and EDGE.
    > 3G combines high-speed mobile access with Internet Protocol (IP) based
    > services. This doesn't just mean fast mobile connection to the World
    > Wide
    > Web - by liberating us from slow connections, cumbersome equipment and
    > immovable access points, 3G will enable new ways to communicate,
    > access
    > information, conduct business and learn.
    >
    >
    > II TECHNICAL QUESTIONS
    >
    > Q 2.1 In CDMA what is meant by "slot cycle index"?
    >
    > A 2.1 [Credit: Bill Walker]
    > On the CDMA Paging Channel (this is the shared channel that all phones
    > listen to for incoming calls and other control info), time is divided
    > into
    > "slots". To conserve power, phones that are currently idle only "wake
    > up"
    > and listen for messages on the Paging Channel during their assigned
    > slots. The slot cycle index determines how often the phone's slot
    > comes
    > around. If the slot cycle index is 0, the phone wakes up every 1.28
    > seconds. If it's one, it wakes up every 2.56 seconds. If it's two,
    > it's
    > every 5.12 seconds, and so on. The larger the setting, the more power
    > is
    > conserved, but the longer it takes to page the phone for an incoming
    > call. You can imagine that if it were set to 10.24 seconds, few
    > callers
    > would hang on the line long enough for you to answer your phone.
    >
    > There are two settings that govern this. One is the "preferred slot
    > cycle
    > index" in the phone, and can be set via service programming. The
    > other is
    > the "maximum slot cycle index" set in the base station and broadcast
    > in
    > overhead messages on the Paging Channel. The phone has to use
    > whichever
    > number is smaller.
    >
    > Q 2.2 What are the frequencies of the 800MHz and 1900MHZ channels?
    >
    > A 2.2 The receive (RX) and transmit (TX) frequencies for the mobile
    > units are:
    > CELLULAR
    >
    > CHANNEL RX TX
    > 1 870.030 825.030
    > 2 870.060 825.060
    > 3 870.090 825.090
    > .
    > .
    > 799 893.970 848.970
    > 800-990 no voice channels
    > 991 869.040 824.040
    > 992 869.070 824.070
    > .
    > .
    > 1023 870.000 825.000
    >
    > PCS
    > CHANNEL RX TX
    > 1 1930.050 1850.050
    > 2 1930.100 1850.100
    > 3 1930.150 1850.150
    > .
    > .
    > 1200 1990.000 1910.000
    >
    >
    > III MANUFACTURER SPECIFIC QUESTIONS
    >
    >
    > Q 3.8 Which digital phone should I buy?
    >
    > A 3.8 (Credit: Michael Geary)
    > Which phone is "better" will depend more on the service provided by a
    > given carrier than the actual piece of equipment you hold in your
    > hand.
    >
    > So backing up a bit, here is the way to answer your question:
    >
    > First, investigate the various wireless carriers in your area. Look up
    > their price plans, get feedback from customers about their coverage
    > and reliability, and then finally see what kind of phones they offer.
    >
    > Then, and only then, it starts to make sense to think about which
    > model of phone. You may well find the decision has already been made
    > for you--most digital carriers sell only certain phones that work with
    > their service.
    >
    >
    > IV WIRELESS CARRIER SPECIFIC QUESTIONS
    >
    > Q 4.1 Which wireless carrier should I sign up with?
    >
    > A 4.1 See A 3.8.
    >
    > V HELPFUL URLs
    >
    > Q 5.1 Where can I get more information about CDMA?
    >
    > A 5.1 Qualcomm, Inc.: http://www.qualcomm.com
    > CDMA Development Group: http://www.cdg.org
    > Wireless Technical Forum: http://www.Lanpaq.com
    >
    > Q 5.3 What are the URLs for the major wireless phone manufacturers?
    >
    > A 5.3 Qualcomm: http://www.qualcomm.com
    > Motorola: http://direct.motorola.com/hellomoto/index.html
    > Nokia: http://www.nokiausa.com
    > Sony Ericsson: http://www.sonyericsson.com/us/
    > Samsung: http://www.samsungusa.com
    > Kyocera Wireless Corp.: http://www.kyocera-wireless.com
    > Audiovox: http://www.audiovox.com
    > LG: http://www.lgmobilephones.com/
    >
    > Q 5.4 Where can I get more information about GSM?
    >
    > A 5.4 http://kbs.cs.tu-berlin.de/~jutta/gsm/js-intro.html
    > http://www.gsmworld.com
    >
    > A 5.4a (Special Thanks to: George Czajkowski)
    >
    > GSM Memorandum of Understanding Association(official GSM page,
    > includes history of GSM):
    > http://www.gsmworld.com
    >
    > Overview of the Global System for Mobile Communications (GSM):
    > http://ccnga.uwaterloo.ca/~jscouria/GSM/
    >
    > Cellular GSM Phones:
    > http://www.geocities.com/CapeCanaveral/2042/nokia.html
    >
    > GSM all over the world (links to GSM related sites):
    > http://www.webring.org/cgi-bin/webring?ring=gsm;list
    >
    > GSM North America:
    > http://www.communicreate.com/gsmnew.htm
    >
    > GSMag International:
    > http://www.gsmag.com/
    >
    >
    > Q 5.6 What other helpful URLs are available?
    >
    > A 5.6
    > Steve Punter's page. Contains lots of interesting info. Check it
    > out!
    > http://www.arcx.com/sites
    >
    > Comparisons of phones and services - national
    > http://www.wirelessdimension.com (new name: point.com but URL still
    > works)
    > http://www.myrateplan.com
    >
    > Cellular Phone Information For Beginners
    > http://web.idirect.com/~aaa/p0000003.htm
    >
    > Cellular, PCS and Wireless Phone Service Information
    > http://www.wirelessadvisor.com/
    >
    > Another FAQ (mostly concerning CDMA):
    > http://denbeste.nu/cdmafaq/
    >
    > A 5.6a More URLs (Credit: Bob Smith)
    >
    > Web Links on wireless information & FAQ's
    >
    > http://www.berkana.com/tower.php3 - Locator of towers near you.
    > http://www.arcx.com/sites/ - Canadian info, but good FAQ's
    > http://www.point.com/ - Source to compare services, phones & coverage
    > areas.
    > http://www.letstalk.com - Same
    > http://www.mybestplan.com/ - Same
    > http://www.mcw.edu/gcrc/cop/cell-pho...h-FAQ/toc.html
    > http://www.sierrawireless.com/
    >
    > Sprint PCS Phone Links
    >
    > http://www.sprintpcs.com/learn/help_sitemap.html
    > http://www.sprintpcs.com/wireless/capable_phones.html
    >
    > Wireless Internet URL's
    >
    > http://www.datalink.net/home.htm
    > http://mobile.msn.com/
    > http://sprintpcs.my.yahoo.com/
    > http://www.hz.com/
    > http://www.messaging.sprintpcs.com/sms/
    > http://www.squeezenet.com
    > http://www.mailandnews.com/
    > http://www.HerMobile.com -- provides email aliases for wireless phones
    >
    >
    >






  • Similar Threads

    1. alt.cellular.verizon
    2. alt.cellular.verizon
    3. alt.cellular.verizon