IF you're having problems with clicking, like the edges are hard to click, or the screen in general is hard to click, the following is how to remedy it.
Tools:
- Torx T6 screw driver
- Small needle
Directions:
- Take off back cover
- Locate red sticker (water detection sticker)
- There is a t6 screw under the sticker and directly across from it
- The problem is that sometimes these screws are too tight
- Start by loosening the exposed screw a tiny bit, then check the clicking on the screen - if this doesn't work, loosen a little more. If the clicking still doesn't work correctly, move on to next step
- Remove the sticker with the small needle (this will not void your warranty) - loosen the screw as you did with the first screw -
- Check the clicking to see if it works better - if not loosen screws more
- Replace the sticker
- Replace back cover
Your screen should now be clicking better