- 04-29-2004, 02:25 PM #1Newbie
- Pu Town
Programming Codes Sanyo 8100
After entering code press menu and save #
3g Vision data programing- ##3282
Debug menu- ##040793
Reverse logistic- ##786
Theres more im sure but thats all I know.
Now theres a few things you can do with this info.
You can set your ACCOLC or access overload code, its basicaly the priority of your call when u register at the tower 1-6 is for normal use, 7-9 Doctors and other Emergency personnel, and 10-15 Gov't only. If you have an 8100 your ACCOLC is 9 if you didnt change it. Its illegal to set your ACCOLC above nine and the feds can hunt you down using the gps in your phone im not sure of the severity of this but myns set to 15 has been for months and theres no feds running me down in the street.
Sumthing else you can do thats perfectly legal is set your data rate its set low step it up a notch. You need to go to the Debug menu for this
Warning if you get into the ##3282 menu and restore the phone your ***t your lock code will change to 0000 and youll clear all your browser info including your IPs wich means your vision will not work.
You can also get on the internet if its not activated on your phone
get a friends 8100 and enter ##3282 go to user name then custum NAI and username again copy there email(firstname.lastname@example.org) adress and password. You dont need an msl to view the info from an 8100 but you do need an msl to modify your own info if you need your msl email me and ill tell you how. One more thing if your phones not vision enabled the IPs might not be stored in your phone email me for the IPs.
› See More: Programing Sanyo 8100
Last edited by SanyoKid_420; 04-29-2004 at 02:31 PM.Will help with sanyo 8100 and sprint scams, need your msl ask me how sprint will give it to you!
- 05-04-2004, 01:41 PM #2Junior Member
- 01-14-2005, 08:36 PM #3Junior Member
ummmm. some questions
well... first question, if you have no more service on it, can you still get internet on it with changing the username to your friends, and password too.....
And another question... whats my msi or whatever???
- 01-15-2005, 04:43 PM #4Junior Member
- 01-15-2005, 04:57 PM #5Junior Member
u there...? im ganna e-mail u
- 01-19-2005, 05:18 PM #6Junior Member
dude, you there?DONATE SOME POINTS, IM POOR!!!
- 02-16-2005, 11:36 AM #7Newbie
sANYOKID 420, I have a 5300, and the msg is lock, how can unlock?
- 03-18-2005, 04:00 AM #8Newbie
sanyokid, could you please email directions on how i can use my sanyo 8100 on verizon. I have so much **** on that phone and the POS verizon phone i have sucks so bad (v60s) c'mon....haha
- 03-18-2005, 04:17 PM #9
Well, you do need a data cable, and BitPim. After you get your data
cable and download Bitpim, you need to get your MSL
here's the link to get your MSL
Then you need to get into the NAM programming of your phone, and enter
in your number,etc
Then change the CDMA Channel to Verizon's which is
20283 I believe
Then you can use it on Verizon, you have to call Verizon and tell them
to put the ESN on the account, they will do it. They have for me 3
timesAsk me about Sprint and Verizon
- 03-19-2005, 02:58 AM #10Newbie
need data cable 4 sanyo 8100
what r IP's?
Is there other way 2 get msl than data cable?
Last edited by JODY; 03-19-2005 at 03:03 AM.
Phones Discussed Above
|More BlackBerry Pearl 8100 Black topics||RIM (Blackberry) Forum||Reviews|