On Cell Phone Forums
comment
Results 1 to 7 of 7
  1. by
    cell-unlocker
    on
    Follow cell-unlocker On Twitter
    Hey guys, if you guys get an unlocking code here are the instructions to unlock your Cingular At&t. Hope this helps!

    BlackJack

    Step Action


    1. Insert NON accepted sim into device

    2. Power on the device
    - Wait approximately 30 seconds until the Sim Lock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code)

    3. Enter the unlock code in the blank field

    4. Press Ok
    - If the unlock code is incorrect, an error dialog will appear. After pressing Ok on this dialog, the user has to re-enter the unlock code after delays (see above in Device Specific Information)
    - If the unlock code is correct, a success dialog will appear.

    5. Press Ok
    - The device is now unlocked and should continue booting

    OR

    1. Insert disallowed simcard (a simcard that the phone does not usaully accept) and enter unlock codes when prompted

    2. NOTE: If you are unable to connect to service provider or unable to make out going calls or recieve messages, this has nothing to do with your phone being locked or not, you need to force the BlackJack to change to GSM mode, this can be done as follows:

    Power on your Phone

    Enter *#1546792*#

    Select Option 3 Network & Call Settings

    Select option 5 Network Mode

    Select GSM




    Without sim alternative i607 / Blackjack




    Power on without sim, you will then get a message saying "SIM Failure" at the top of the screen.


    Click "Done" then press the green button to get into the dial pad. Type in #7465625*638*

    Then it will display "Enter Network Control Key" this is where you enter the 8 digit unlock code. Then click ok

    Your phone is now unlocked




    Unlock Instruction for FIDO Samsung i616 Jack
    1. Power ON your phone with a FIDO SIM Card that the phone is locked to
    2. Type #7465625*638*
    3. Network Lock Screen appear, enter UNLOCK CODE
    3. Device is now unlocked


    How to Enter Unlock Codes on Samsung Z105 and Z107:

    Switch ON your phone with a not accepted SIM card
    Compose : #7465625*638*YOURCODE# (by "yourcode" I mean the unlock code we gave you)

    How to Enter Unlock Codes on Samsung Z510 and Z320i:

    Switch ON your phone without SIM Card
    Compose : **YOURCODE# (by "yourcode" I mean the unlock code we gave you)

    How to Enter Unlock Codes on Samsung 3G, Zxxx & Dxxx, A707 Series:

    Switch ON your phone without SIM Card.
    Compose : #7465625*638*YOURCODE# (or *#7465625*638*CODE#) (by "yourcode" I mean the unlock code we gave you)


    How to Enter Unlock Codes on Samsung (all other models):

    Switch ON your phone with a not accepted SIM card
    Phone will ask for the "Password"
    You can now enter the unlock code


    OR (if phone shows "Insert Correct SIM Card")




    Switch ON your phone with a not accepted SIM card
    Compose : #0111*YOURCODE# (by "yourcode" I mean the unlock code we gave you)





    How to Enter Unlock Codes on Treo 180, 270:

    Switch ON your phone without SIM Card.
    Compose : *#*#CODE# (substitute the word "code" with the unlock code we gave you).
    or

    Switch ON your phone with a not allowed SIM card.
    Enter the unlock code.
    Important Note: On some models the Num Lock is not automatically enabled so make sure it is ON before entering the unlock code.
    How to Enter Unlock Codes on Treo 600 / 650

    1. Power on phone with a non-cingular sim inserted
    2. When phone is powered up dial any number, it will ask you if you want to turn phone on, click yes
    3. It will say "your phone cannot be used with this SIM card" click ok
    4. It will say "Network Search" click cancel
    5. using the dial pad do the following: enter *#*#code# then press dial on the screen.
    6. It will say the sim lock has been removed from your phone


    How to Enter Unlock Codes on Treo 750:

    Please insert a not allowed SIM card.
    Place the battery and the cover, windows will boot automatically.
    Turn on the phone by pressing the front upper-right red button on the keypad.
    The phone will ask for the unlock code.
    Pull out the stylus at the back of the phone, tap the keyboard icon at the center-bottom of the screen.
    Enter the unlock code by tapping your stylus on the screen keyboard. Then tap OK.
    Your Palm Treo phone should be unlocked by now
    OR

    Switch ON your phone with allowed SIM card.
    Go to menu and select "Phone Tool" or "Phone Application"
    Type on virtual keyboard *#*#CODE# (substitute the word "code" with the unlock code we gave you).
    Select with PEN "Number" and phone will show that it's unlocked.
    OR

    Power on with NON-Cingular sim
    using physical keyboard hold down key with large white dot ( lower left hand corner of keyboard ) while typing numbers on the keyboard

    How to Enter Unlock Codes on Treo 680 / Centro:


    1. Power on with non-cingular sim

    It will then say "Your phone cannot be used with this SIM card"

    2. Click ok

    3. Click dialpad tab, bottom of the screen far left

    4. Using stylus type *#*#code#

    5. Press the green button

    6. It will then say The SIM Lock has been removed from the phone"


    Troubleshooting:

    Error Message: "The SIM Lock has NOT been removed from this phone"

    Solution 1: Please make sure you are entering the correct code and enter it using this method *#*#CODE# dial

    Solution 2: If the phone says that the SIM lock has not been removed, ensure that the phone radio (wireless mode) is on.




    HP iPaq Unlock Code Entry Instructions

    How to Enter Unlock Codes on HP iPaq series phones (iPaq 6315, 6325, 6300, 6515 , etc)

    Step Action
    1 Insert NON Cingular SIM into device

    2 Power on the device
    - Wait approximately 30 seconds until the SimLock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code)

    3 Enter the unlock code in the blank field

    4 Press Ok
    - If the unlock code is incorrect, an error dialog will appear. After pressing Ok on this dialog, the user has to re-enter the unlock code after delays (see above in Device Specific Information)
    - If the unlock code is correct, a success dialog will appear.

    5 Press Ok
    - The device is now unlocked and should continue booting

    OR

    1. On the Today screen, tap Start > Settings.

    2. Tap the Phone Band icon.

    3. Tap the Keyboard icon to open the virtual keyboard

    4. Tap Shift and then Ctl key to enable the keys.

    5. Tap the blank area below the band selection box to open the unlock tool.

    6. Tap Shift and then Ctl to disable the keys.

    7. Enter the 8-digit unlock code and tap OK when done.

    8. Wait for the device to validate the unlock code (about five seconds). You will see one of the following screens:

    1) Unlock successful.

    2) Unlock failed due to incorrect code. The user has three attempts to unlock. After three attempts, the device will refuse any more unlocking attempts. Perform a soft reset to reset the counter to perform additional unlocking attempts.

    3) Device is not ready for unlocking. This error message displays when the user tries to unlock when the phone application (not the device) is not in a steady state. It takes 30 seconds after powering on the phone for it to reach a steady state.




    *If you already have an unlock code and sim card but when you input code, it always says " unlock code not accepted, you have tried...." You must update your ROM version . About 5% hp 6315 have this problem.
    This problem can easy be resolved with this ROM update ( ROM v1.00.38 )
    This rom update will remove all T-mobile logos and sofware and your 6315 will become OEM 6315
    dowload here : http://rebootitsmagic.com/ipaq/SP29760_6315.zip
    1. Unzip/Extract it using your unzip program (i.e. WinRAR, WinZip, 7zip, etc...)
    2. Place the h6315 in cradle. connect it to USB and charger
    3. Double click on the hpRUU.exe to run the program
    4. View the Readme and if you wish to proceed Agree to the Terms and Conditions
    5. Click Next
    6. Click Next again to flash the device with the new ROM





    How to Enter Unlock Codes on Sony Ericsson Cell Phones (all models):




    If your phone has a "JOGDIAL" (for example SonyEricsson K700i), then you must press the "down arrow" instead of the "left arrow" for step 3 & 5. By "Down Arrow" I mean directing the Jogdial down!




    For the unlocking of a locked Sony Ericsson no sim card is required.
    Turn on the handset. Display will indicate “Insert SIM
    Press the left Arrow (<) button.
    Press the star (*) button twice.
    Press the left Arrow (<) button again.
    You will briefly see one of the following messages listed on devices display: “Personalized with MNC2” or “Personalized with MNC3”.
    Wait approximately three seconds.
    The display will indicate “Network” and a picture of a closed lock.
    Press Select.
    The display will indicate “Unlock (Net) 5” and “NCK:”
    Enter the 16 digit NLCK4U code (unlock code we provided you) and press okay.
    The handset will display “Network unlocked” and the display “Insert SIM” appears.
    The handset is successfully unlocked.



    How to Unlock LG (most models):




    Insert not-allowed SIM card
    Power on the handset- phone will display "phone restricted"
    Select "Cancel" - phone will display "phone restriction code"
    Enter the SIM unlock code
    Select "OK" - the handset is now successfully unlocked


    Unlock Instruction for LG TU720 (SHINE)


    1. Power ON your phone with not allowed sim card (one that didn't come with the phone)
    2. Type *#865625#
    3. the phone will ask you to input the unlock code twice, just input the unlock code
    4. Device is now unlocked



    How to Unlock LG KG800 or TG800 Chocolate:




    With the phone in standby, enter 2945#*7101#. This will activate the extra menu.
    Go to: Settings>Security>SimLock>Network

    Select deactivate. Enter the unlock code

    How to Unlock LG C2000:

    Insert non-Cingular SIM card

    Power on the handset - phone will display "phone restricted"
    Select "Cancel" - phone will display "phone restriction code"
    Enter the SIM Unlock code
    Select "OK" - the handset is now successfully unlocked

    How to Enter Unlock Codes on LG F2250:


    With allowed sim card in the start menu type: 2945#*3311#.

    Handset shows saved, then return to startup screen
    Press Menu key, choose Settings > Security > Sim Lock> Network > Deactivate, handset will now show 'Enter NCK'
    Enter your unlock code and OK.


    How to Enter Unlock Codes on LG U8150:




    Switch ON your phone with a not allowed SIM card.
    Compose: 277634#*#.
    Go to menu "SIM Lock".
    Enter the unlock code

    How to Enter Unlock Codes on LG U8110:


    With a not allowed sim card in your phone enter Pin code then validate, type: 277634#*#
    Select 'Sim Unlock' menu #
    Enter NCK code then validate
    Your phone is now unlocked.

    How to Enter Unlock Codes on LG U8210:


    With a not allowed sim card enter Pin code then validate, type: 277634#*#
    Shows test menu
    Choose sim test menu and type: 2945#*#, choose Sim Unlock menu
    Handset shows 'Enter NCK'
    Enter code, then hit OK.

    How to Enter Unlock Codes on LG U81xx:


    To bring up the unlock menu on the phone with a SIM card, type 2945#*88110#
    Enter the code
    In case you need to reset the phone without a SIM card first, type 277634#*# or 47328545454#.


    How to Enter Unlock Codes on Cingular AT&T LG CU500:




    Insert non-Cingular SIM card.
    Power on the handset. Phone will display "Invalid SmartChip"
    (IF THE PHONE DOES NOT DISPLAY INVALID SMARTCHIP, PLEASE POWER OFF AND ON AGAIN)
    In Idle screen, enter 159753#*#. Phone will display "Enter NCK, Remaining 5
    Enter the 8 digit SIM unlock code
    Select "OK". The handset is now successfully unlocked.

    How to Enter Unlock Codes on all other LG cell phones:


    Switch ON your phone with an allowed SIM card
    Then compose:
    2945#*5101# - (if you have a LG 510w)
    1945#*5101# - (if you have a LG 1200 & B1200)
    2945#*5221# - (if you have a LG 5200 & 52200)
    2945#*5301# - (if you have a LG 5300)
    2945#*5401# - (if you have a LG 5400)
    2945#*70001# - (if you have a LG 7020)
    2945#*7101# - (if you have a LG 7100)
    2945#*1201# or 2945#*70001# - (if you have a LG 1100)
    2945#*70001# - (if you have a LG7250T)
    2945#*2201# - (if you have a LG C2200)
    2945#*5301# - (if you have a LG T5100)
    2945#*3311# - (if you have a LG C3310)
    Go to "Menu" and then to "Settings"
    Then select "Security"
    To finish select "Network Provider" and select "Deactivate"
    Enter the unlock code

    If your cell phone is not listed, please follow instructions for LG C2000 above

    How to Enter Unlock Codes on LG KE970 Shine:

    Switch ON your phone with an allowed SIM card
    Then compose: 2945#*9701#
    Press CALL.
    It should you ask you for the code.

    How to Enter Unlock Codes on CU575 / Trax

    1. Put a non cingular sim in the phone ,phone says invalid smart chip

    2. Now enter *#865625# then select option 1 and then again select 1 and enter your 16 digits code


    How to enter codes for HTC, Pantech, Cingular, HP, 8525, 3125, 2125 & all Windows Smartphones, Windows Pocket PC Phones:

    Power on with incorrect sim, enter unlock code when prompted

    Enter code using onscreen keyboard when unlocking a Pocket PC Phones




    ***Below are Blackberry instructions that work for most network providers. T-Mobile locked cell phones have to be entered differently and are shown at the end ***



    How to Enter Unlock Codes on BlackBerry 8800 & 8820:

    You must have a SIM card in your phone to complete these steps (can be active or inactive)
    Go to settings menu => and then Options.
    Select Advanced options => and then Sim card
    Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
    Hold the ALT Key while typing in MEPE on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
    You should be presented with a prompt "Enter Network MEP Code". Type in the 16 or 8 digit unlock code and press in the track wheel / jog dial to confirm
    Your phone is now unlocked

    How to Enter Unlock Codes on BlackBerry Curve 8300, 8310 and 8320:

    You must have a SIM card in your phone to complete these steps, I have found that this procedure works best with an AT&T or Cingular Sim card in the phone (can be active or inactive ). Make sure the phone is not displaying the low battery warning!

    Power on

    Go to settings

    Go to advanced options
    Go to sim card
    Type MEPD
    Type MEP[Alt + 2] (all this with either a cingular or ATT SIM inside)
    It will ask you for the unlock code. Enter it and your phone is unlocked!






    How to Enter Unlock Codes on BlackBerry 8100, 8110, 8120 Pearl:







    Go to Options Menu => Advanced Options
    In the SIM Card menu, hold down the shift (right of the zero, cap) press meppd
    You'll see the unlocking level screen there you hold the ALT key (left side below type mepp2 (*You won't see any text while you are typing either one of these.)
    Type in the 16 or 8 digit unlock code and your phone is unlocked!
    or

    Insert SIM into device
    Power phone on and Turn off the radio (Turn Wireless Off option) VERY IMPORTANT.
    Select "Options" THEN SELECT ADVANCED OPTIONS
    Scroll down and select "SIM Card"
    Type "MEPPD" (please note that you will not see what you type on the screen)
    Type "MEPP then [ALT BUTTON] then "2" (please note that you will not see what you type on the screen)
    Enter the Unlock Code
    Press enter
    Reboot device. Device is now unlocked.


    How to Enter Unlock Codes on BlackBerry 8700 and 8700c:




    You must have a SIM card in your phone to complete these steps, I have found that this procedure works best with an AT&T or Cingular Sim card in the phone (can be active or inactive ). Make sure the phone is not displaying the low battery warning!

    Go to settings
    Go to options
    Go to advanced options
    Go to sim card
    Type MEPD (not case sensitive) (you will not see text appear on screen while typing)
    Does it say Network active? if so your phone is locked
    Hold the ALT Key while typing in MEPE (not case sensitive, and you will not see text appear on screen while typing)
    It will say "Enter Network MEP Code, Type in the 16 or 8 digit unlock code, press in the jog dial to confirm.
    Your phone is now unlocked


    How to Enter Unlock Codes on BlackBerry 6xxx 7xxx: ie 6230, 7100, 7290 etc.:

    Select Options menu on BB.
    Now you select SIM CARD menu. To be able to see this you have to type this on the keypad on phone : (TEXT WILL NOT APPEAR ON THE SCREEN until you enter the unlock code)
    Type 'MEPD' for all models except 7100 in which case in case use 'MEPPD'.
    Usually you should see "active" NET lock. Now in order to disable this lock type 'MEP2' respectively 'MEPP2' if phone is 7100 and will appear a dialog asking for code. NOTE: You must use the "alt" or "shift" key to enable numbers so example would be: m-e-p-"alt key"-2.
    Now you should see the place to enter your net unlock code. (if not, you didn't type in mep2 or mepp2 properly.)
    Here you must enter the "NET Unlock Code" that the bb unlocker showed you and hit return.



    How to Enter Unlock Codes on T-Mobile BlackBerry Cell Phones:

    On the Home screen, click the Tools icon. The Options screen appears.
    In the tools screen, select the Settings icon.
    Scroll to SIM Card and select it. You should see the phone number and the SIM ID number.
    Type ‘mepd’ to display the first five levels of SIM locking.
    T-Mobile uses network locking so the Network should display Active. All other states should display Disabled. Please note: For the Blackberry 7100t you will hit the “P” twice when entering the ‘mepd’ and ‘mep2′ for steps 4 & 5.
    Type ‘mep2′ to display the dialog box asking for the unlock code (Press the Alt + 2 key to get the number 2)
    Input the Network Unlock code
    Press ENTER and reboot handheld.


    How to Enter Unlock Codes on T-Mobile BlackBerry 8100 Cell Phones (alternative instructions if above instructions do not work):

    Can be done without a sim card inserted.
    While on the home screen, click the “blackberry key” on keyboard, then select “options”.
    Choose “Advanced Options”.
    Select “Sim Card”
    There is no area to type these letters, you just type them as instructed. No need to hit keys twice to get a letter either. Type m e p p d to display the first five levels of SIM locking. Most companies use network locking so the Network should display Active. All other states should display Disabled (you will not see text appear on screen while typing)
    Type m e p p 2 to display the dialog box asking for the unlock code (Press the Alt + 2 key to get the number 2) ( you will not see text appear on screen while typing )
    Input the SIM Unlock code
    Press in the trackball in once




    How to Enter Unlock Codes on T-Mobile Blackberry 8100 Cell Phones (alternative instructions if above instructions do not work):

    Can be done without a sim card inserted.
    While on the home screen, click the “blackberry key” on keyboard, then select “options”.
    Choose “Advanced Options”.
    Select “Sim Card”
    There is no area to type these letters; you just type them as instructed. No need to hit keys twice to get a letter either. Type m e p p d to display the first five levels of SIM locking. Most companies use network locking so the Network should display Active. All other states should display Disabled (you will not see text appear on screen while typing)
    Type m e p p 2 to display the dialog box asking for the unlock code (Press the Alt + 2 key to get the number 2) ( you will not see text appear on screen while typing )
    Input the SIM Unlock code
    Press in the trackball in once



    How to Enter Unlock Codes on Nokia phones



    *** please read instructions carefully before starting! ***

    Most Nokia Phones (Fido Canada phones please try with +7 at end first):




    Switch ON your phone without SIM Card
    Compose #pw+yourcode+1# ("yourcode" is meant to be the actual unlock code we gave you)
    ie. if your code is 000000000000000 then enter exactly:

    #pw+000000000000000+1#

    *** IF THE CODE IS REJECTED, DO NOT TRY AGAIN. ***


    Substitute the 1 at the end with 7.

    So 2nd time try: #PW+YOURCODE+7#

    ie. #pw+000000000000000+7#

    The letter P appears after you quickly press 3 times the button star ( * )
    The letter W appears after you quickly press 4 times the button star ( * )
    The letter + appears after you quickly press 2 times the button star ( * )

    The phone shows "SIM Restriction Off" and is unlocked!





    IF YOU HAVE TRIED TO PUT IN AN INCORRECT CODE 3 OR MORE TIMES PREVIOUSLY & YOU GET PHONE RESTRICTED SIGN, THEN YOUR DEVICE IS HARD LOCKED AND MUST BE UNLOCKED WITH WITH A CABLE AND HARDWARE BOX.







    Sierra Wireless Aircard




    Please download and install Sierra Watcher. Once you have Watcher installed put the non-Cingular SIM into the card and Watcher will prompt you to enter the unlock code. Please make sure to enter the unlock code correctly.





    Sidekick Unlock Instructions:


    1. Insert a SIM card from a different network provider and turn on the Sidekick. A dialog screen comes up, prompting you for the code.


    2. The box will say:


    Title: Special Code Required

    Dialog: Enter code to enable SIM

    Box for Code: 1-8 digits

    Options: Enable or Cancel


    3. In the upper right hand corner, the SIM is flashing where the signal strength should be. On entering the code, a dialog box comes up saying authenticating code. It’s unlocked. Enjoy.

    In case you see the “Waiting for Activation Screen”, hit the menu key and the letter L key at the same time. The menu key is the top left key. By doing this, the waiting screen will go away and you will be able to make calls. For best results, hold down Menu and the L key until the Waiting for Activation screen disappears.



    How to Enter Unlock Codes on Siemens phones:

    *#0001*yourunlockcode#

    or

    *#0000*yourunlockcode#



    How to Enter Unlock Codes on Motorola phones:




    Switch ON your phone with a not allowed SIM Card,
    Phone should show "Enter Special or Subsidy Code",
    Enter unlock code
    Your phone is now unlocked.



    WARNING: if any of these messages appear :

    - "Contact Service Provider"
    - or "Tamper Alter"
    - or "Wait Before Enter Special Code"
    - or "Contact Service'

    It's because you or somebody else has already entered too many wrong codes. You just have to leave the phone ON on the error message and after 1hr - 8hrs the message "Enter Special Code" will appear again!

    Note: If your phone is on a 3G network enter **057*, then another window will appear to enter the unlock code.







    How to Enter Unlock Codes on Motorola CDMA and TDMA:

    Press 74663 # [Menu] [Menu] and you will be asked for a subsidy code.
    Enter unlock code
    Your phone will be unlocked instantly.



    How to Enter Unlock Codes on Motorola MPX:

    I will supply you with 2 unlock codes. One will be the NETWORK PIN and the other the SERVICE PROVIDER PIN.

    Switch ON your phone with a not allowed SIM Card,
    If phone is asking for NETWORK PIN enter the NETWORK PIN we sent you
    If phone is asking for SERVICE PROVIDER PIN. Enter the SERVICE PROVIDER PIN we sent you.
    Your Phone should now be unlocked.



    MPX FAQ's:




    Question: Phone is asking for NETWORK PUK and a new password twice. I entered the code from yourselves but phone saying "Operation not supported by this SIM card".What should I do?

    Answer:

    If you still have the original card

    Please power on the phone with the original card in and when phone fully powered on (You have access to the menu), then
    TYPE: * # * * 3 6 4 # and press green button
    you'll get a error message and after it your will see:Engineering menu
    Click "Options"
    Click "GSM Test"
    Select "Send AT command"
    Now you will see a new window with :
    Send AT Command
    type
    AT+CLCK="PN",0,"[SERVICE PROVIDER PIN or NETWORK PIN] "
    and press send.
    If you get Response "0 []" phone is unlocked
    If you get 1 error, then make sure you have typed the code correct and try the other code


    If you don't have the original card

    Please switch your phone off, take battery out. Put battery back in, power on the phone.
    Now the phone it will ask to enter NETWORK PUK. Now please DON'T TOUCH the phone for 2 hours.
    After 2 hours it will change screen! Now please enter the code received from us and 00000000 (eight zero's) as a new password.
    Now the phone will be unlocked.

    You can get you unlock code from

    http://www.cellunlocker.net

    or

    http://www.cellphoneunlock.net


    See More: Cingular At&t Unlock code instructions
    Last edited by cell-unlocker; 01-12-2009 at 08:58 PM.



  2. #2
    efparri
    efparri is offline
    Phone Maniac

    Cell Phone
    Apple iPhone 4 16GB Black
    Carrier
    AT&T
    Location
    Northern Virginia
    Posts
    597 - liked 92 times

    Re: Cingular At&t Unlock code instructions

    When you obtain the unlock code from the carrier, you will be given instructions.
    Earl F. Parrish



  3. #3
    cell-unlocker
    cell-unlocker is offline

    Location
    Washington
    Posts
    1,344 - liked 59 times
    Follow cell-unlocker On Twitter

    Re: Cingular At&t Unlock code instructions

    yes but not all the carriers will give you the unlock code, this is for people's who they carrier will not give out their phone's unlocking code. Hope that helps

    unlocking your verizon blackberry storm is instant with www.cellunlocker.net #1 for Cell Unlock, IMEI Mobile Unlocking or Lowest Price on the Internet to Unlock your Phone, 100% Guaranteed
    -
    WWW.CELLUNLOCKER.NET

    Call Toll Free 1-800-507-9077


    #1 Phone Unlocking Site on the Internet

    Lowest Price and Fastest Turnaround 100% Guaranteed

    We can Unlock Phones INSTANTLY, deal directly with the Source



    Click the "Like" Button on our Facebook page for a chance for a FREE UNLOCK code HERE

    Do our Youtube Promotion for a FREE UNLOCK code HERE


    - Cellunlocker.net Team



  4. #4
    cell-unlocker
    cell-unlocker is offline

    Location
    Washington
    Posts
    1,344 - liked 59 times
    Follow cell-unlocker On Twitter

    Re: Cingular At&t Unlock code instructions

    the services provided are 100% guaranteed to unlock your cingular at&t phone or your money back, this will allow you to unlock your phone to any network as long as it is a gsm phone
    -
    WWW.CELLUNLOCKER.NET

    Call Toll Free 1-800-507-9077


    #1 Phone Unlocking Site on the Internet

    Lowest Price and Fastest Turnaround 100% Guaranteed

    We can Unlock Phones INSTANTLY, deal directly with the Source



    Click the "Like" Button on our Facebook page for a chance for a FREE UNLOCK code HERE

    Do our Youtube Promotion for a FREE UNLOCK code HERE


    - Cellunlocker.net Team



  5. #5
    cell-unlocker
    cell-unlocker is offline

    Location
    Washington
    Posts
    1,344 - liked 59 times
    Follow cell-unlocker On Twitter

    Re: Cingular At&t Unlock code instructions

    All At&t codes are now instantly emailed to you
    -
    WWW.CELLUNLOCKER.NET

    Call Toll Free 1-800-507-9077


    #1 Phone Unlocking Site on the Internet

    Lowest Price and Fastest Turnaround 100% Guaranteed

    We can Unlock Phones INSTANTLY, deal directly with the Source



    Click the "Like" Button on our Facebook page for a chance for a FREE UNLOCK code HERE

    Do our Youtube Promotion for a FREE UNLOCK code HERE


    - Cellunlocker.net Team



  6. #6
    efparri
    efparri is offline
    Phone Maniac

    Cell Phone
    Apple iPhone 4 16GB Black
    Carrier
    AT&T
    Location
    Northern Virginia
    Posts
    597 - liked 92 times

    Re: Cingular At&t Unlock code instructions

    Quote Originally Posted by cell-unlocker View Post
    yes but not all the carriers will give you the unlock code, this is for people's who they carrier will not give out their phone's unlocking code. Hope that helps

    unlocking your verizon blackberry storm is instant with www.cellunlocker.net #1 for Cell Unlock, IMEI Mobile Unlocking or Lowest Price on the Internet to Unlock your Phone, 100% Guaranteed
    Without the unlock code, your instructions are meaningless. Don't you provide instructions along with the unlock codes? It would appear to be pointless to post unlock instructions on a website with so few viewers.
    Earl F. Parrish



  7. #7
    camstuf
    camstuf is offline
    /\/\s.Super/\/\odette
    camstuf's Avatar

    Cell Phone
    Samsung Galaxy S III 16GB White
    Carrier
    Sprint PCS
    Location
    Houston, Texas, United States
    Posts
    3,730 - liked 282 times
    Blog Entries
    72
    Follow camstuf On Twitter Add camstuf on Facebook Add camstuf on Google+

    Re: Cingular At&t Unlock code instructions

    This is a Vender advertisment...
    >>>Unlock Code requests
    If you need an unlock code, do a search or look for vendors that unlock phones within the forum,
    Some Unlock Venders offer free unlock codes at limited times only, check back often.
    DO NOT POST REQUESTS WITH IMEI INFO!!! DO NOT START A NEW THREAD!!!
    Please see this page>>>HERE, scroll way down to our Unlock Venders:


    CPF Staff
    If you find this post helpful, click on bottom of each post: Like l Share
    * FAQ * Search * CPF PhoneDatabase* CPF Super/\/\odette



  • Phones Discussed Above

    BlackBerry 6210 / 6230 More BlackBerry 6210 / 6230 topics RIM (Blackberry) Forum Reviews
    Sierra Wireless Aircard 402 More Sierra Wireless Aircard 402 topics Other Phone Reviews Forum Reviews
    HP iPAQ Glisten More HP iPAQ Glisten topics HP (Palm) Forum Reviews
    Palm Treo Pro More Palm Treo Pro topics HP (Palm) Forum Reviews
    Samsung Z510 More Samsung Z510 topics Samsung Forum Reviews
  • Similar Threads







  • Quick Reply Quick Reply

    If you are already a member, please login above.