help on iden webjal program

I have recently downloaded webjal and it is working fine. When I click on connect to phone it pops up "the application was unable to read the required phone information". Ive been working on this for hours trying to get my computer to read my phone..When i connect the usb my computer makes a noise like its suppose to do. But i cannot connect my phone to webjal. Can anyone out there help me with this problem..

thank you

Have you got the baud rate set to 19200

Follow these instructions for Webjal
Make sure the options is set to USB, (default is serial)
And make sure you are on the web with no firewalls

yes the baud rate is at 19200 and the usb box is checked. What is the serial thingy? I have all firewalls off and i am connected to the internet.

A serial cable is the other style plug on the back of your computer with the screw in locks.

i got the nextel i860 does this matter

No as long as you have the usb cable and follow the directions in the link that camstuf posted it will work.

well I followed the site and everything is right and the usb works. Everytime i click on connect the phone its still saying the same thing..

another question how do you set serial as the default? thanks for all your help on this..

If you are using a usb cable you need to open webjal click on preferences click the box that says connect via usb then click apply.

I did that and its still saying the application was unable to read the required phone information. i dont know what the heck is going on. the usb reads and everything and when i connect my phone it says device attached. I just dont know why its not connecting to iden webjal

i got a question..if i buy the serial cable would that fix my problem instead of using the usb..sorry for all of these replies its just i want this to work..

thanks

do you have the drivers installed???
Try unistalling webjal reinstall, reboot,
turn off the phone and back on, disable all java apps.

You shouldn't have any troubles using the USB Cable. A few questions though:

1) Are you using Windows Media Center Edition or Windows XP? WebJAL doesn't work with Media Center versions.

2) Make sure all your Java applications on your phone are closed. If you have any suspended applications, your phone will not read.

3) Have you installed the WebJAL patcher?

If you've done everything correctly then it should work. If it's still not working then goto CONTROL PANEL -> PHONE AND MODEM OPTIONS -> Remove all the Motorola USB iDEN Modem drivers then disconnect your phone from the USB Cable and plug it back in. Do the auto-install once windows detects the USB device and reinstall the USB Drivers once.

Try to connect to your phone again. If it still doesn't work, try removing the patch and uninstall WebJAL and start from scratch. Don't forget to remove the iden modem drivers again. Good luck.

Right, and if you do use media center...