The Sony Xperia Z5 is an Android smartphone produced by Sony. Part of the Sony Xperia Z series, the device, at that point known by the project code name "Sumire", was unveiled along with the Xperia Z5 Compact and Xperia Z5 Premium during a press conference at IFA 2015 on September 2, 2015. The device was launched globally in October and will launch in the United States as an unlocked device in February 2016.[1][2] It is the successor to the Sony Xperia Z3+.

Don’t worry if your Sony Xperia Z5 screen is cracked, just follow HCQS step by step guide, you can replace your screen by your own.

Step 1 — LCD Screen
Remove SIM card tray

Step 2

Heat the back cover to soften the adhesive sticker.
Place the suction cup and inert metal opening tool to open a gap from top side

Step 3
Insert the guitar pick and slide it to cut the adhesive sticker underneath.
Remove back cover.

Step 4
Release battery connector.
Pull off the adhesive tape underneath the battery.
Pry up battery.

Step 5
Release rear camera connector, front camera connector, audio jack connector and main flex connector on the motherboard.
Twist off screws there.
Remove that rubber securing bracket.

Step 6
Remove metal cover and twist off two screws.
Loosen the bottom side of main flex assembly.

Step 7
Loosen side button contactors ( Attention: the fingerprint sensor is here, be careful to loosen it), then remove the whole main flex assembl

Step 8
Remove rear camera.
Remove that securing bracket, then remove front camera.

Step 9
Release LCD screen flex connector, charging port connector, microphone connector here.
Remove motherboard.

Step 10
Remove charging port flex.

Step 11
Remove microphone.


Step 12
Remove the metal bracket covering on the LCD screen flex.

Step 13
The sticker underneath is strong, so use heat gun to soften it for a few minutes.
Remove LCD screen carefully.

Step 14
Done.

To reassemble your device, follow these instructions in reverse order.

› See More: Guide for How to Replace Your Broken Sony Xperia Z5 Screen