Results 1 to 3 of 3
  1. #1
    Cary
    Guest
    I'd like to replace the housing on my t637 as mine is getting a bit beat up.
    I've ordered a new OEM full cover, but I've been unable to find clear
    instructions on how to actually swap the housings. Removing the antenna
    cover seems especially murky. I do have a T6 driver, but beyond that, I'd
    welcome any tips and pointers you folks can give me.
    -- Cary





    See More: How to change cover on t637




  2. #2
    EL
    Guest

    Re: How to change cover on t637

    You have to slide the antenna cover UP
    you have to press very hard down and up
    you can also try to put a small flat tip on the left of the Camera

    below is a link for the 616 I used the information and it worked on my 637
    the antenna cover is very tuff I thought I was going to break it then it pop
    up

    try to avoid any dust than can get betwen the screen and the housing glass

    http://www.howardforums.com/showthre...t=t616+housing"Cary" <[email protected]ast.net> wrote in messagenews:[email protected]> I'd like to replace the housing on my t637 as mine is getting a bit beatup. I've ord
    ered a new OEM full cover, but I've been unable to find clearinstructions on how to actually swap the housings. Removing the antennacover seems especially murky. I do have a T6 driver, but beyond that, I'dwelcome any tips and pointers you folks can give
    me.> -- Cary>




  3. #3
    Cary
    Guest

    Re: How to change cover on t637

    Thanks, EL. The illustrations are excellent and your advice will be
    helpful.
    --Cary.

    "EL" <[email protected]> wrote in message
    news:[email protected]
    > You have to slide the antenna cover UP
    > you have to press very hard down and up
    > you can also try to put a small flat tip on the left of the Camera
    >
    > below is a link for the 616 I used the information and it worked on my 637
    > the antenna cover is very tuff I thought I was going to break it then it
    > pop up
    >
    > try to avoid any dust than can get betwen the screen and the housing glass
    >
    > http://www.howardforums.com/showthre...t=t616+housing"Cary"
    > <[email protected]> wrote in
    > messagenews:[email protected]> I'd like to replace the
    > housing on my t637 as mine is getting a bit beatup. I've ordered a new OEM
    > full cover, but I've been unable to find clearinstructions on how to
    > actually swap the housings. Removing the antennacover seems especially
    > murky. I do have a T6 driver, but beyond that, I'dwelcome any tips and
    > pointers you folks can give me.> -- Cary>
    >






  • Phones Discussed Above

    Sony Ericsson T637 More Sony Ericsson T637 topics Sony Ericsson Forum Reviews
  • Similar Threads