K750i's RF performance - not top notch

"Enigma" <[email protected]> wrote in message
news:[email protected]...
> Hi All,
>
> I had some trouble installing firmware.
>
> Everytime i held the 'c' button and then inserted cable, I got a new
> hardware wizard pop up asking me to istall the driver for a usb flash
> device.
>
> I pointed the wizard to the cd that came with my 750i and i couldnt find a
> driver.
>
> Anyway if you go to the sonyericsson support site you can now download the
> usb flash drivers (only about 100k in size)
>
> After installing the drivers you need to disconnect the phone again hold
> the
> 'c' button and connect the phone again.
>
> With any luck you firmware update should start.........Mine took about 6
> minutes !
>
> Hope this helps !

Does this option work with O2? When I hold the c button and insert cable,
absolutely zilch happens - no new hardware wizzard.

---

› See More: K750i's RF performance - not top notch

did you power the phone down for 20 seconds before hand ?

----------------------------------------------------------------------------
-------------------------





"Duck" <[email protected]> wrote in message
news:[email protected]...
>
> "Enigma" <[email protected]> wrote in message
> news:[email protected]...
> > Hi All,
> >
> > I had some trouble installing firmware.
> >
> > Everytime i held the 'c' button and then inserted cable, I got a new
> > hardware wizard pop up asking me to istall the driver for a usb flash
> > device.
> >
> > I pointed the wizard to the cd that came with my 750i and i couldnt find
a
> > driver.
> >
> > Anyway if you go to the sonyericsson support site you can now download
the
> > usb flash drivers (only about 100k in size)
> >
> > After installing the drivers you need to disconnect the phone again hold
> > the
> > 'c' button and connect the phone again.
> >
> > With any luck you firmware update should start.........Mine took about 6
> > minutes !
> >
> > Hope this helps !
>
> Does this option work with O2? When I hold the c button and insert cable,
> absolutely zilch happens - no new hardware wizzard.
>
>

"Enigma" <[email protected]> wrote in message
news:[email protected]...
> did you power the phone down for 20 seconds before hand ?
>
Yeppers. Still zilch.

"Duck" <[email protected]> wrote in message
news:[email protected]...
>
> "Enigma" <[email protected]> wrote in message
> news:[email protected]...
> > did you power the phone down for 20 seconds before hand ?
> >
> Yeppers. Still zilch.
>
>

Does the phone power on???
Once u have put the cable in, u have to let go of c and the screen should
light up after a few seconds.
If your using xp, there should be a logo in the taskbar when the phone is
connected.
Also check if EPIUSB.SYS is in c:\windows\system32\drivers

Thus spake Duck:
> "Enigma" <[email protected]> wrote in message
> news:[email protected]...
>> did you power the phone down for 20 seconds before hand ?
>>
> Yeppers. Still zilch.


I tried nearly every possible combo I can think of under WinXP Pro. The
phone must have had its power cycled nearly a 100 times by now trying to get
the Wizard to start. Reading the Esato forums, it would appear that some h/w
configs just won't work the way SE expect. Until an alternative method is
proffered, many just won't be able to upgrade. I even tried it on a 2nd copy
of XP without luck, have disconnected other USB devices etc, etc. All K750i
USB functions work fine as does FMA!
--
Thank people in advance? Thanking or cursing them afterwards at least
gives some feedback!