Results 1 to 4 of 4
  1. #1
    Enforcement Team
    Guest
    It keeps saying bonding failed. It reconises the device but it just keeps
    failing any ideas?.

    TIA





    See More: HBH-15 headset- P800




  2. #2
    gopi
    Guest

    Re: HBH-15 headset- P800

    "Enforcement Team" <[email protected]> wrote in message news:<[email protected]>...
    > It keeps saying bonding failed. It reconises the device but it just keeps
    > failing any ideas?.


    I have a P800 and have bonded it with two different HBH-15 headsets a
    few times without problems. Are you sure that you remember the
    passcode number for it?

    If you've forgotten the code, or just want to reset the headset just
    in case, I believe the procedure is:
    Turn the headset off. Then, press and hold the power switch in, Keep
    holding it even after it flashes red/green to indicate it's
    discoverable. I believe you hold it for 10 seconds after that or so.
    Then it'll reset itself, with the default code of "0000".



  3. #3
    Tight Guard Security
    Guest

    Re: HBH-15 headset- P800


    "gopi" <[email protected]> wrote in message
    news:[email protected]
    > "Enforcement Team" <[email protected]> wrote in message

    news:<[email protected]>...
    > > It keeps saying bonding failed. It reconises the device but it just

    keeps
    > > failing any ideas?.

    >
    > I have a P800 and have bonded it with two different HBH-15 headsets a
    > few times without problems. Are you sure that you remember the
    > passcode number for it?
    >
    > If you've forgotten the code, or just want to reset the headset just
    > in case, I believe the procedure is:
    > Turn the headset off. Then, press and hold the power switch in, Keep
    > holding it even after it flashes red/green to indicate it's
    > discoverable. I believe you hold it for 10 seconds after that or so.
    > Then it'll reset itself, with the default code of "0000".


    Yea i got the code ok as it works perfect with my T68i with no problem





  4. #4
    Tight Guard Security
    Guest

    Re: HBH-15 headset- P800


    "Tight Guard Security" <[email protected]> wrote in message
    news:[email protected]
    >
    > "gopi" <[email protected]> wrote in message
    > news:[email protected]
    > > "Enforcement Team" <[email protected]> wrote in message

    > news:<[email protected]>...
    > > > It keeps saying bonding failed. It reconises the device but it just

    > keeps
    > > > failing any ideas?.

    > >
    > > I have a P800 and have bonded it with two different HBH-15 headsets a
    > > few times without problems. Are you sure that you remember the
    > > passcode number for it?
    > >
    > > If you've forgotten the code, or just want to reset the headset just
    > > in case, I believe the procedure is:
    > > Turn the headset off. Then, press and hold the power switch in, Keep
    > > holding it even after it flashes red/green to indicate it's
    > > discoverable. I believe you hold it for 10 seconds after that or so.
    > > Then it'll reset itself, with the default code of "0000".

    >
    > Yea i got the code ok as it works perfect with my T68i with no problem


    Make sure you place 0000 and not oooo as its easy if your writing with the
    pen as it recognises o instead of 0 this giving you a wrong password HTH.





  • Phones Discussed Above

    Sony Ericsson P800 More Sony Ericsson P800 topics Sony Ericsson Forum Reviews
  • Similar Threads