Results 1 to 7 of 7
  1. #1
    Scott C
    Guest
    I thought my attached voice names to callers was much louder
    when I 1st had the phone.. almost like a ring tone volume.. (the phone would
    ring and announce someone if I had a voice ID attached to the callers name -
    and I would hear "THE NAME" fairly loud). Now, I heard it through my ear
    piece loud but not the speaker.

    Does someone out there have the T610 set up with voice ID's, and can they
    tell me if it's somewhat loud when the phone rings - not through the
    headset. Maybe I have a setting wrong in my phone, OR I was mistaken in the
    beginning.

    Thanks

    sc





    See More: Announce caller voice - T610




  2. #2
    Alan B
    Guest

    Re: Announce caller voice - T610


    "Scott C" <[email protected]> wrote in message
    news:[email protected]
    > I thought my attached voice names to callers was much louder
    > when I 1st had the phone.. almost like a ring tone volume.. (the phone

    would
    > ring and announce someone if I had a voice ID attached to the callers

    name -
    > and I would hear "THE NAME" fairly loud). Now, I heard it through my ear
    > piece loud but not the speaker.
    >
    > Does someone out there have the T610 set up with voice ID's, and can they
    > tell me if it's somewhat loud when the phone rings - not through the
    > headset. Maybe I have a setting wrong in my phone, OR I was mistaken in

    the
    > beginning.
    >
    > Thanks
    >
    > sc
    >


    I have mine set up with voice IDs but they are very quiet and it's difficult
    to hear which name is being announced unless you're very close to the phone
    when it rings





  3. #3
    Scott C
    Guest

    Re: Announce caller voice - T610

    Thanks, this is what mine does.. works well with the headset, but not
    without.
    sc
    "Alan B" <[email protected]> wrote in message
    news:[email protected]
    >
    > "Scott C" <[email protected]> wrote in message
    > news:[email protected]
    > > I thought my attached voice names to callers was much louder
    > > when I 1st had the phone.. almost like a ring tone volume.. (the phone

    > would
    > > ring and announce someone if I had a voice ID attached to the callers

    > name -
    > > and I would hear "THE NAME" fairly loud). Now, I heard it through my ear
    > > piece loud but not the speaker.
    > >
    > > Does someone out there have the T610 set up with voice ID's, and can

    they
    > > tell me if it's somewhat loud when the phone rings - not through the
    > > headset. Maybe I have a setting wrong in my phone, OR I was mistaken in

    > the
    > > beginning.
    > >
    > > Thanks
    > >
    > > sc
    > >

    >
    > I have mine set up with voice IDs but they are very quiet and it's

    difficult
    > to hear which name is being announced unless you're very close to the

    phone
    > when it rings
    >
    >






  4. #4
    Gottfried Mayer
    Guest

    Re: Announce caller voice - T610

    "Scott C" <[email protected]> schrieb im Newsbeitrag
    news:[email protected]
    > Thanks, this is what mine does.. works well with the headset, but not
    > without.
    > sc
    > "Alan B" <[email protected]> wrote in message
    > news:[email protected]
    > >
    > > "Scott C" <[email protected]> wrote in message
    > > news:[email protected]
    > > > I thought my attached voice names to callers was much louder
    > > > when I 1st had the phone.. almost like a ring tone volume.. (the phone

    > > would
    > > > ring and announce someone if I had a voice ID attached to the callers

    > > name -
    > > > and I would hear "THE NAME" fairly loud). Now, I heard it through my

    ear
    > > > piece loud but not the speaker.
    > > >
    > > > Does someone out there have the T610 set up with voice ID's, and can

    > they
    > > > tell me if it's somewhat loud when the phone rings - not through the
    > > > headset. Maybe I have a setting wrong in my phone, OR I was mistaken

    in
    > > the
    > > > beginning.
    > > >
    > > > Thanks
    > > >
    > > > sc
    > > >

    > >
    > > I have mine set up with voice IDs but they are very quiet and it's

    > difficult
    > > to hear which name is being announced unless you're very close to the

    > phone
    > > when it rings
    > >
    > >

    >
    >


    Do you have a headset with cable?
    With my Bluetooth-Headset (HBH-60), I don't hear the name on the headset,
    but quietly in my pocket :-((

    I tried different things, but the BT-headset just "rings" in it's own stupid
    way, when someone calls...

    Gottfried





  5. #5
    Scott C
    Guest

    Re: Announce caller voice - T610

    I do use the headset with cable - I like the button on the headset to make
    calls and end calls (similar to the BT200 headset I had)... but when I tried
    the BT200 headset, it worked fine, but would not connect quick enough when
    the phone rang so I could hear the name - not a large issue with me, just an
    observation - as you do hear the name, I suspect your headset is not
    connecting fast enough either.

    sc

    "Gottfried Mayer" <[email protected]> wrote in message
    news:[email protected]
    > "Scott C" <[email protected]> schrieb im Newsbeitrag
    > news:[email protected]
    > > Thanks, this is what mine does.. works well with the headset, but not
    > > without.
    > > sc
    > > "Alan B" <[email protected]> wrote in message
    > > news:[email protected]
    > > >
    > > > "Scott C" <[email protected]> wrote in message
    > > > news:[email protected]
    > > > > I thought my attached voice names to callers was much louder
    > > > > when I 1st had the phone.. almost like a ring tone volume.. (the

    phone
    > > > would
    > > > > ring and announce someone if I had a voice ID attached to the

    callers
    > > > name -
    > > > > and I would hear "THE NAME" fairly loud). Now, I heard it through my

    > ear
    > > > > piece loud but not the speaker.
    > > > >
    > > > > Does someone out there have the T610 set up with voice ID's, and can

    > > they
    > > > > tell me if it's somewhat loud when the phone rings - not through the
    > > > > headset. Maybe I have a setting wrong in my phone, OR I was mistaken

    > in
    > > > the
    > > > > beginning.
    > > > >
    > > > > Thanks
    > > > >
    > > > > sc
    > > > >
    > > >
    > > > I have mine set up with voice IDs but they are very quiet and it's

    > > difficult
    > > > to hear which name is being announced unless you're very close to the

    > > phone
    > > > when it rings
    > > >
    > > >

    > >
    > >

    >
    > Do you have a headset with cable?
    > With my Bluetooth-Headset (HBH-60), I don't hear the name on the headset,
    > but quietly in my pocket :-((
    >
    > I tried different things, but the BT-headset just "rings" in it's own

    stupid
    > way, when someone calls...
    >
    > Gottfried
    >
    >






  6. #6
    Gottfried Mayer
    Guest

    Re: Announce caller voice - T610

    "Scott C" <[email protected]> schrieb im Newsbeitrag
    news:[email protected]

    <corrected top-post, see below>

    > "Gottfried Mayer" <[email protected]> wrote in message
    > news:[email protected]
    > > "Scott C" <[email protected]> schrieb im Newsbeitrag
    > > news:[email protected]
    > > > Thanks, this is what mine does.. works well with the headset, but not
    > > > without.
    > > > sc
    > > > "Alan B" <[email protected]> wrote in message
    > > > news:[email protected]
    > > > >
    > > > > "Scott C" <[email protected]> wrote in message
    > > > > news:[email protected]
    > > > > > I thought my attached voice names to callers was much louder
    > > > > > when I 1st had the phone.. almost like a ring tone volume.. (the

    > phone
    > > > > would
    > > > > > ring and announce someone if I had a voice ID attached to the

    > callers
    > > > > name -
    > > > > > and I would hear "THE NAME" fairly loud). Now, I heard it through

    my
    > > ear
    > > > > > piece loud but not the speaker.
    > > > > >
    > > > > > Does someone out there have the T610 set up with voice ID's, and

    can
    > > > they
    > > > > > tell me if it's somewhat loud when the phone rings - not through

    the
    > > > > > headset. Maybe I have a setting wrong in my phone, OR I was

    mistaken
    > > in
    > > > > the
    > > > > > beginning.
    > > > > >
    > > > > > Thanks
    > > > > >
    > > > > > sc
    > > > > >
    > > > >
    > > > > I have mine set up with voice IDs but they are very quiet and it's
    > > > difficult
    > > > > to hear which name is being announced unless you're very close to

    the
    > > > phone
    > > > > when it rings
    > > > >
    > > > >
    > > >
    > > >

    > >
    > > Do you have a headset with cable?
    > > With my Bluetooth-Headset (HBH-60), I don't hear the name on the

    headset,
    > > but quietly in my pocket :-((
    > >
    > > I tried different things, but the BT-headset just "rings" in it's own

    > stupid
    > > way, when someone calls...
    > >
    > > Gottfried
    > >
    > >

    > I do use the headset with cable - I like the button on the headset to make
    > calls and end calls (similar to the BT200 headset I had)... but when I

    tried
    > the BT200 headset, it worked fine, but would not connect quick enough when
    > the phone rang so I could hear the name - not a large issue with me, just

    an
    > observation - as you do hear the name, I suspect your headset is not
    > connecting fast enough either.
    >
    > sc


    Hi sc,

    It's not an issue about the connecting time, I hear the name of the caller
    out of the T610's speaker (not very loud, though) and the Bluetooth Headset
    just does a ringing noise (as always). It seems to me as if the bluetooth
    headset can't do anything else than this ringing tone when a call comes in
    :-(

    If the bluetooth connection is made very very fast, the headset would still
    just "ring" on its own and the T610 would do the proper ringtone (midi) and
    the caller name.


    Anyway: happy holydays
    Gottfried





  7. #7
    Scott C
    Guest

    Re: Announce caller voice - T610

    This is different that what I thought as my BT headset did not answer quick
    enough for me to think the callers name would come through..

    sc

    "Gottfried Mayer" <[email protected]> wrote in message
    news:[email protected]
    > "Scott C" <[email protected]> schrieb im Newsbeitrag
    > news:[email protected]
    >
    > <corrected top-post, see below>
    >
    > > "Gottfried Mayer" <[email protected]> wrote in message
    > > news:[email protected]
    > > > "Scott C" <[email protected]> schrieb im Newsbeitrag
    > > > news:[email protected]
    > > > > Thanks, this is what mine does.. works well with the headset, but

    not
    > > > > without.
    > > > > sc
    > > > > "Alan B" <[email protected]> wrote in message
    > > > > news:[email protected]
    > > > > >
    > > > > > "Scott C" <[email protected]> wrote in message
    > > > > > news:[email protected]
    > > > > > > I thought my attached voice names to callers was much louder
    > > > > > > when I 1st had the phone.. almost like a ring tone volume.. (the

    > > phone
    > > > > > would
    > > > > > > ring and announce someone if I had a voice ID attached to the

    > > callers
    > > > > > name -
    > > > > > > and I would hear "THE NAME" fairly loud). Now, I heard it

    through
    > my
    > > > ear
    > > > > > > piece loud but not the speaker.
    > > > > > >
    > > > > > > Does someone out there have the T610 set up with voice ID's, and

    > can
    > > > > they
    > > > > > > tell me if it's somewhat loud when the phone rings - not through

    > the
    > > > > > > headset. Maybe I have a setting wrong in my phone, OR I was

    > mistaken
    > > > in
    > > > > > the
    > > > > > > beginning.
    > > > > > >
    > > > > > > Thanks
    > > > > > >
    > > > > > > sc
    > > > > > >
    > > > > >
    > > > > > I have mine set up with voice IDs but they are very quiet and it's
    > > > > difficult
    > > > > > to hear which name is being announced unless you're very close to

    > the
    > > > > phone
    > > > > > when it rings
    > > > > >
    > > > > >
    > > > >
    > > > >
    > > >
    > > > Do you have a headset with cable?
    > > > With my Bluetooth-Headset (HBH-60), I don't hear the name on the

    > headset,
    > > > but quietly in my pocket :-((
    > > >
    > > > I tried different things, but the BT-headset just "rings" in it's own

    > > stupid
    > > > way, when someone calls...
    > > >
    > > > Gottfried
    > > >
    > > >

    > > I do use the headset with cable - I like the button on the headset to

    make
    > > calls and end calls (similar to the BT200 headset I had)... but when I

    > tried
    > > the BT200 headset, it worked fine, but would not connect quick enough

    when
    > > the phone rang so I could hear the name - not a large issue with me,

    just
    > an
    > > observation - as you do hear the name, I suspect your headset is not
    > > connecting fast enough either.
    > >
    > > sc

    >
    > Hi sc,
    >
    > It's not an issue about the connecting time, I hear the name of the caller
    > out of the T610's speaker (not very loud, though) and the Bluetooth

    Headset
    > just does a ringing noise (as always). It seems to me as if the bluetooth
    > headset can't do anything else than this ringing tone when a call comes in
    > :-(
    >
    > If the bluetooth connection is made very very fast, the headset would

    still
    > just "ring" on its own and the T610 would do the proper ringtone (midi)

    and
    > the caller name.
    >
    >
    > Anyway: happy holydays
    > Gottfried
    >
    >






  • Phones Discussed Above

    Sony Ericsson T610 More Sony Ericsson T610 topics Sony Ericsson Forum Reviews
  • Similar Threads