Results 1 to 12 of 12
- 05-01-2004, 04:50 AM #1HappyHikerGuest
I'm trying to sync my v525 with mobilePhoneTools via blue tooth.
Initially, I had paired my computer with v525, then ran mobilePhoneTools,
it detected the phone but couldn't verify pin(I entered the same pin as I
used to pair with computer)
I tried unpairing with computer and powered bluetooth off, then on.
Now when I try to run mobilePhoneTools bluetooth set up and I run detect
devices and use the FindMe option on the v525
imobilePhoneTools doesn't find anything. My computer will still find the
phone. I've tried it with computer paired and unpaired, rebooted computer
etc Any Ideas ?
Winxp sp1.(I'm using the v500 option on mobilePhoneTools as there is no v525
option)
› See More: v525 and mobilePhone tools-Help
- 05-01-2004, 06:59 AM #2JayGuest
Re: v525 and mobilePhone tools-Help
Select V525M or V500M not the V500... I had exactly the same problem and
this helped me. Also be aware, I have to re-pair my phone/laptop each time
I run the software as each time I re-run it, it can't find the phone. I
think the software is crap and people slag Microsoft off for putting out
rubbish... Well BVRP ... what ya got to say for yourself... many post's
here remarking on the poor performance of your software!
Regards
J
"HappyHiker" <[email protected]> wrote in message
news:[email protected]...
> I'm trying to sync my v525 with mobilePhoneTools via blue tooth.
>
> Initially, I had paired my computer with v525, then ran mobilePhoneTools,
> it detected the phone but couldn't verify pin(I entered the same pin as I
> used to pair with computer)
>
> I tried unpairing with computer and powered bluetooth off, then on.
>
> Now when I try to run mobilePhoneTools bluetooth set up and I run detect
> devices and use the FindMe option on the v525
> imobilePhoneTools doesn't find anything. My computer will still find the
> phone. I've tried it with computer paired and unpaired, rebooted computer
> etc Any Ideas ?
>
> Winxp sp1.(I'm using the v500 option on mobilePhoneTools as there is no
v525
> option)
>
>
- 05-01-2004, 06:59 AM #3JayGuest
Re: v525 and mobilePhone tools-Help
Select V525M or V500M not the V500... I had exactly the same problem and
this helped me. Also be aware, I have to re-pair my phone/laptop each time
I run the software as each time I re-run it, it can't find the phone. I
think the software is crap and people slag Microsoft off for putting out
rubbish... Well BVRP ... what ya got to say for yourself... many post's
here remarking on the poor performance of your software!
Regards
J
"HappyHiker" <[email protected]> wrote in message
news:[email protected]...
> I'm trying to sync my v525 with mobilePhoneTools via blue tooth.
>
> Initially, I had paired my computer with v525, then ran mobilePhoneTools,
> it detected the phone but couldn't verify pin(I entered the same pin as I
> used to pair with computer)
>
> I tried unpairing with computer and powered bluetooth off, then on.
>
> Now when I try to run mobilePhoneTools bluetooth set up and I run detect
> devices and use the FindMe option on the v525
> imobilePhoneTools doesn't find anything. My computer will still find the
> phone. I've tried it with computer paired and unpaired, rebooted computer
> etc Any Ideas ?
>
> Winxp sp1.(I'm using the v500 option on mobilePhoneTools as there is no
v525
> option)
>
>
- 05-02-2004, 04:52 PM #4druidhGuest
Re: v525 and mobilePhone tools-Help
I don't think you can blame BVRP for making crap software based on your
experience - MPT works fine for my combination of XP and V525 - 1st time /
every time.
--
druidh
"Jay" <[email protected]> wrote in message
news:[email protected]...
> Select V525M or V500M not the V500... I had exactly the same problem and
> this helped me. Also be aware, I have to re-pair my phone/laptop each
time
> I run the software as each time I re-run it, it can't find the phone. I
> think the software is crap and people slag Microsoft off for putting out
> rubbish... Well BVRP ... what ya got to say for yourself... many post's
> here remarking on the poor performance of your software!
>
> Regards
>
> J
>
> "HappyHiker" <[email protected]> wrote in message
> news:[email protected]...
> > I'm trying to sync my v525 with mobilePhoneTools via blue tooth.
> >
> > Initially, I had paired my computer with v525, then ran
mobilePhoneTools,
> > it detected the phone but couldn't verify pin(I entered the same pin as
I
> > used to pair with computer)
> >
> > I tried unpairing with computer and powered bluetooth off, then on.
> >
> > Now when I try to run mobilePhoneTools bluetooth set up and I run detect
> > devices and use the FindMe option on the v525
> > imobilePhoneTools doesn't find anything. My computer will still find the
> > phone. I've tried it with computer paired and unpaired, rebooted
computer
> > etc Any Ideas ?
> >
> > Winxp sp1.(I'm using the v500 option on mobilePhoneTools as there is no
> v525
> > option)
> >
> >
>
>
- 05-02-2004, 04:52 PM #5druidhGuest
Re: v525 and mobilePhone tools-Help
I don't think you can blame BVRP for making crap software based on your
experience - MPT works fine for my combination of XP and V525 - 1st time /
every time.
--
druidh
"Jay" <[email protected]> wrote in message
news:[email protected]...
> Select V525M or V500M not the V500... I had exactly the same problem and
> this helped me. Also be aware, I have to re-pair my phone/laptop each
time
> I run the software as each time I re-run it, it can't find the phone. I
> think the software is crap and people slag Microsoft off for putting out
> rubbish... Well BVRP ... what ya got to say for yourself... many post's
> here remarking on the poor performance of your software!
>
> Regards
>
> J
>
> "HappyHiker" <[email protected]> wrote in message
> news:[email protected]...
> > I'm trying to sync my v525 with mobilePhoneTools via blue tooth.
> >
> > Initially, I had paired my computer with v525, then ran
mobilePhoneTools,
> > it detected the phone but couldn't verify pin(I entered the same pin as
I
> > used to pair with computer)
> >
> > I tried unpairing with computer and powered bluetooth off, then on.
> >
> > Now when I try to run mobilePhoneTools bluetooth set up and I run detect
> > devices and use the FindMe option on the v525
> > imobilePhoneTools doesn't find anything. My computer will still find the
> > phone. I've tried it with computer paired and unpaired, rebooted
computer
> > etc Any Ideas ?
> >
> > Winxp sp1.(I'm using the v500 option on mobilePhoneTools as there is no
> v525
> > option)
> >
> >
>
>
- 05-03-2004, 02:03 AM #6PaulGuest
Re: v525 and mobilePhone tools-Help
"HappyHiker" <[email protected]> wrote in message
news:[email protected]...
> I'm trying to sync my v525 with mobilePhoneTools via blue tooth.
>
> Initially, I had paired my computer with v525, then ran mobilePhoneTools,
> it detected the phone but couldn't verify pin(I entered the same pin as I
> used to pair with computer)
>
> I tried unpairing with computer and powered bluetooth off, then on.
>
> Now when I try to run mobilePhoneTools bluetooth set up and I run detect
> devices and use the FindMe option on the v525
> imobilePhoneTools doesn't find anything. My computer will still find the
> phone. I've tried it with computer paired and unpaired, rebooted computer
> etc Any Ideas ?
>
> Winxp sp1.(I'm using the v500 option on mobilePhoneTools as there is no
v525
> option)
>
>
Mine will pair then during set up get message " Comm port Installation
Failed"
& will go no further. Am I missing something in set up
Paul
- 05-03-2004, 05:09 PM #7GingerGuest
Re: v525 and mobilePhone tools-Help
"HappyHiker" <[email protected]> wrote in message
news:[email protected]...
> I'm trying to sync my v525 with mobilePhoneTools via blue tooth.
>
> Initially, I had paired my computer with v525, then ran mobilePhoneTools,
> it detected the phone but couldn't verify pin(I entered the same pin as I
> used to pair with computer)
>
> I tried unpairing with computer and powered bluetooth off, then on.
>
> Now when I try to run mobilePhoneTools bluetooth set up and I run detect
> devices and use the FindMe option on the v525
> imobilePhoneTools doesn't find anything. My computer will still find the
> phone. I've tried it with computer paired and unpaired, rebooted computer
> etc Any Ideas ?
>
> Winxp sp1.(I'm using the v500 option on mobilePhoneTools as there is no
v525
> option)
>
>
Don't know what you boys are doing, mine works fine, do the mobiletools
updates thou
- 05-03-2004, 05:09 PM #8GingerGuest
Re: v525 and mobilePhone tools-Help
"HappyHiker" <[email protected]> wrote in message
news:[email protected]...
> I'm trying to sync my v525 with mobilePhoneTools via blue tooth.
>
> Initially, I had paired my computer with v525, then ran mobilePhoneTools,
> it detected the phone but couldn't verify pin(I entered the same pin as I
> used to pair with computer)
>
> I tried unpairing with computer and powered bluetooth off, then on.
>
> Now when I try to run mobilePhoneTools bluetooth set up and I run detect
> devices and use the FindMe option on the v525
> imobilePhoneTools doesn't find anything. My computer will still find the
> phone. I've tried it with computer paired and unpaired, rebooted computer
> etc Any Ideas ?
>
> Winxp sp1.(I'm using the v500 option on mobilePhoneTools as there is no
v525
> option)
>
>
Don't know what you boys are doing, mine works fine, do the mobiletools
updates thou
- 05-04-2004, 04:41 AM #9HappyHikerGuest
Re: v525 and mobilePhone tools-Help
Ginger,
What settigns do you use, how did you set the thing up to get it to work.
I only have options for V500 or v600, not even a v500m.
Did you just follow the setup wizard when you log on or try something else ?
"Ginger" <[email protected]> wrote in message
news:[email protected]...
>
> "HappyHiker" <[email protected]> wrote in message
> news:[email protected]...
> > I'm trying to sync my v525 with mobilePhoneTools via blue tooth.
> >
> > Initially, I had paired my computer with v525, then ran
mobilePhoneTools,
> > it detected the phone but couldn't verify pin(I entered the same pin as
I
> > used to pair with computer)
> >
> > I tried unpairing with computer and powered bluetooth off, then on.
> >
> > Now when I try to run mobilePhoneTools bluetooth set up and I run detect
> > devices and use the FindMe option on the v525
> > imobilePhoneTools doesn't find anything. My computer will still find the
> > phone. I've tried it with computer paired and unpaired, rebooted
computer
> > etc Any Ideas ?
> >
> > Winxp sp1.(I'm using the v500 option on mobilePhoneTools as there is no
> v525
> > option)
> >
> >
>
> Don't know what you boys are doing, mine works fine, do the mobiletools
> updates thou
>
>
- 05-04-2004, 04:41 AM #10HappyHikerGuest
Re: v525 and mobilePhone tools-Help
Ginger,
What settigns do you use, how did you set the thing up to get it to work.
I only have options for V500 or v600, not even a v500m.
Did you just follow the setup wizard when you log on or try something else ?
"Ginger" <[email protected]> wrote in message
news:[email protected]...
>
> "HappyHiker" <[email protected]> wrote in message
> news:[email protected]...
> > I'm trying to sync my v525 with mobilePhoneTools via blue tooth.
> >
> > Initially, I had paired my computer with v525, then ran
mobilePhoneTools,
> > it detected the phone but couldn't verify pin(I entered the same pin as
I
> > used to pair with computer)
> >
> > I tried unpairing with computer and powered bluetooth off, then on.
> >
> > Now when I try to run mobilePhoneTools bluetooth set up and I run detect
> > devices and use the FindMe option on the v525
> > imobilePhoneTools doesn't find anything. My computer will still find the
> > phone. I've tried it with computer paired and unpaired, rebooted
computer
> > etc Any Ideas ?
> >
> > Winxp sp1.(I'm using the v500 option on mobilePhoneTools as there is no
> v525
> > option)
> >
> >
>
> Don't know what you boys are doing, mine works fine, do the mobiletools
> updates thou
>
>
- 05-09-2004, 12:46 AM #11Big Man 7Guest
Re: v525 and mobilePhone tools-Help
1st off have you got the new version V2 20 not v2 16
run the auto update to get it
I have v525 on my screen but I am using usb cable
I think the v525 came on the update to v2 20
"HappyHiker" <[email protected]> wrote in message
news:[email protected]...
> Ginger,
>
> What settigns do you use, how did you set the thing up to get it to work.
> I only have options for V500 or v600, not even a v500m.
> Did you just follow the setup wizard when you log on or try something else
?
>
>
> "Ginger" <[email protected]> wrote in message
> news:[email protected]...
> >
> > "HappyHiker" <[email protected]> wrote in message
> > news:[email protected]...
> > > I'm trying to sync my v525 with mobilePhoneTools via blue tooth.
> > >
> > > Initially, I had paired my computer with v525, then ran
> mobilePhoneTools,
> > > it detected the phone but couldn't verify pin(I entered the same pin
as
> I
> > > used to pair with computer)
> > >
> > > I tried unpairing with computer and powered bluetooth off, then on.
> > >
> > > Now when I try to run mobilePhoneTools bluetooth set up and I run
detect
> > > devices and use the FindMe option on the v525
> > > imobilePhoneTools doesn't find anything. My computer will still find
the
> > > phone. I've tried it with computer paired and unpaired, rebooted
> computer
> > > etc Any Ideas ?
> > >
> > > Winxp sp1.(I'm using the v500 option on mobilePhoneTools as there is
no
> > v525
> > > option)
> > >
> > >
> >
> > Don't know what you boys are doing, mine works fine, do the mobiletools
> > updates thou
> >
> >
>
>
- 05-09-2004, 12:46 AM #12Big Man 7Guest
Re: v525 and mobilePhone tools-Help
1st off have you got the new version V2 20 not v2 16
run the auto update to get it
I have v525 on my screen but I am using usb cable
I think the v525 came on the update to v2 20
"HappyHiker" <[email protected]> wrote in message
news:[email protected]...
> Ginger,
>
> What settigns do you use, how did you set the thing up to get it to work.
> I only have options for V500 or v600, not even a v500m.
> Did you just follow the setup wizard when you log on or try something else
?
>
>
> "Ginger" <[email protected]> wrote in message
> news:[email protected]...
> >
> > "HappyHiker" <[email protected]> wrote in message
> > news:[email protected]...
> > > I'm trying to sync my v525 with mobilePhoneTools via blue tooth.
> > >
> > > Initially, I had paired my computer with v525, then ran
> mobilePhoneTools,
> > > it detected the phone but couldn't verify pin(I entered the same pin
as
> I
> > > used to pair with computer)
> > >
> > > I tried unpairing with computer and powered bluetooth off, then on.
> > >
> > > Now when I try to run mobilePhoneTools bluetooth set up and I run
detect
> > > devices and use the FindMe option on the v525
> > > imobilePhoneTools doesn't find anything. My computer will still find
the
> > > phone. I've tried it with computer paired and unpaired, rebooted
> computer
> > > etc Any Ideas ?
> > >
> > > Winxp sp1.(I'm using the v500 option on mobilePhoneTools as there is
no
> > v525
> > > option)
> > >
> > >
> >
> > Don't know what you boys are doing, mine works fine, do the mobiletools
> > updates thou
> >
> >
>
>
Phones Discussed Above
More Motorola v500 / v525 / v505 topics | Motorola Forum | Reviews |
Similar Threads
- alt.cellular.motorola
- alt.cellular.motorola
- alt.cellular.nokia
- alt.cellular.ericsson
Can I use a Minecraft Texture Pack I Made for My Unity Game?
in Chit Chat