Results 1 to 6 of 6
- 02-04-2005, 06:01 PM #1Kevin SpinGuest
I just got an "upgrade" to a V3 to replace by old SE Z600.
I am trying to transfer my phonebook across. When I did this going from a
T68i to the Z600 it was simple - Send all by bluetooth.
If I try this with the V3 is seems to transfer but the V3 comes up with a
message "Entire phonebook too large to open". I have reduced it from 350
records to around 200 but still the same. I have removed all the linked
pictures, voice recording and ringtomes which the SE transferred without
problem but still no go.
I have tried sending them all to my PC which puts them in Outlook where they
can then be selected as a block and sent by BT but the V3 can only cope one
at a time.
Am I missing something obvious or am I really going to have to transfer them
one at a time?
I'm trying to be open minded about this phone as it's the first Motorola
since a Startac many years ago but so far I'm not impressed. The address
seach someone else mentions in another recent post seems so fundamentally
flawed.
--
Kev
› See More: Transfering phonebook to V3
- 02-04-2005, 11:37 PM #2BruceRGuest
Re: Transfering phonebook to V3
Your best bet would be a program like Data Pilot (www.datapilot.com)
that works with pretty much any phone. It will let you download the
phonebook to the program, massage it as required to meet the Moto
format, and upload it to the v3.
From:Kevin Spin
[email protected]
> I just got an "upgrade" to a V3 to replace by old SE Z600.
> I am trying to transfer my phonebook across. When I did this going
> from a T68i to the Z600 it was simple - Send all by bluetooth.
> If I try this with the V3 is seems to transfer but the V3 comes up
> with a message "Entire phonebook too large to open". I have reduced
> it from 350 records to around 200 but still the same. I have removed
> all the linked pictures, voice recording and ringtomes which the SE
> transferred without problem but still no go.
> I have tried sending them all to my PC which puts them in Outlook
> where they can then be selected as a block and sent by BT but the V3
> can only cope one at a time.
> Am I missing something obvious or am I really going to have to
> transfer them one at a time?
>
> I'm trying to be open minded about this phone as it's the first
> Motorola since a Startac many years ago but so far I'm not impressed.
> The address seach someone else mentions in another recent post seems
> so fundamentally flawed.
>
> --
> Kev
- 02-05-2005, 02:11 PM #3Kevin SpinGuest
Re: Transfering phonebook to V3
Thanks for the suggestion, Bruce.
I got there in the end by sending the full phonebook to the PC (Outlook),
exporting from Outlook as CSV then importing the csv to Phonetools and
synchonising. Took a bit of messing about with fields but is OK now.
Kev
"BruceR" <[email protected]> wrote in message
news:[email protected]...
> Your best bet would be a program like Data Pilot (www.datapilot.com) that
> works with pretty much any phone. It will let you download the phonebook
> to the program, massage it as required to meet the Moto format, and upload
> it to the v3.
>
> From:Kevin Spin
> [email protected]
>
>> I just got an "upgrade" to a V3 to replace by old SE Z600.
>> I am trying to transfer my phonebook across. When I did this going
>> from a T68i to the Z600 it was simple - Send all by bluetooth.
>> If I try this with the V3 is seems to transfer but the V3 comes up
>> with a message "Entire phonebook too large to open". I have reduced
>> it from 350 records to around 200 but still the same. I have removed
>> all the linked pictures, voice recording and ringtomes which the SE
>> transferred without problem but still no go.
>> I have tried sending them all to my PC which puts them in Outlook
>> where they can then be selected as a block and sent by BT but the V3
>> can only cope one at a time.
>> Am I missing something obvious or am I really going to have to
>> transfer them one at a time?
>>
>> I'm trying to be open minded about this phone as it's the first
>> Motorola since a Startac many years ago but so far I'm not impressed.
>> The address seach someone else mentions in another recent post seems
>> so fundamentally flawed.
>>
>> --
>> Kev
>
>
- 02-05-2005, 03:45 PM #4BruceRGuest
Re: Transfering phonebook to V3
Great idea!
From:Kevin Spin
[email protected]
> Thanks for the suggestion, Bruce.
> I got there in the end by sending the full phonebook to the PC
> (Outlook), exporting from Outlook as CSV then importing the csv to
> Phonetools and synchonising. Took a bit of messing about with fields
> but is OK now.
> Kev
>
>
>
> "BruceR" <[email protected]> wrote in message
> news:[email protected]...
>> Your best bet would be a program like Data Pilot (www.datapilot.com)
>> that works with pretty much any phone. It will let you download the
>> phonebook to the program, massage it as required to meet the Moto
>> format, and upload it to the v3.
>>
>> From:Kevin Spin
>> [email protected]
>>
>>> I just got an "upgrade" to a V3 to replace by old SE Z600.
>>> I am trying to transfer my phonebook across. When I did this going
>>> from a T68i to the Z600 it was simple - Send all by bluetooth.
>>> If I try this with the V3 is seems to transfer but the V3 comes up
>>> with a message "Entire phonebook too large to open". I have reduced
>>> it from 350 records to around 200 but still the same. I have removed
>>> all the linked pictures, voice recording and ringtomes which the SE
>>> transferred without problem but still no go.
>>> I have tried sending them all to my PC which puts them in Outlook
>>> where they can then be selected as a block and sent by BT but the V3
>>> can only cope one at a time.
>>> Am I missing something obvious or am I really going to have to
>>> transfer them one at a time?
>>>
>>> I'm trying to be open minded about this phone as it's the first
>>> Motorola since a Startac many years ago but so far I'm not
>>> impressed. The address seach someone else mentions in another
>>> recent post seems so fundamentally flawed.
>>>
>>> --
>>> Kev
- 10-16-2005, 07:21 PM #5wjgiiiGuest
Re: Transfering phonebook to V3
I'm having the same problem. Could you please explain the "phonetool"
part?
Thanks
wjg
Kevin Spin Wrote:
> Thanks for the suggestion, Bruce.
> I got there in the end by sending the full phonebook to the PC
> (Outlook),
> exporting from Outlook as CSV then importing the csv to Phonetools and
> synchonising. Took a bit of messing about with fields but is OK now.
>
> Kev
>
>
>
> "BruceR" [email protected] wrote in message
> news:[email protected]
> Your best bet would be a program like Data Pilot (www.datapilot.com)
> that
> works with pretty much any phone. It will let you download the
> phonebook
> to the program, massage it as required to meet the Moto format, and
> upload
> it to the v3.
>
> From:Kevin Spin
> [email protected]
> -
> I just got an "upgrade" to a V3 to replace by old SE Z600.
> I am trying to transfer my phonebook across. When I did this going
> from a T68i to the Z600 it was simple - Send all by bluetooth.
> If I try this with the V3 is seems to transfer but the V3 comes up
> with a message "Entire phonebook too large to open". I have reduced
> it from 350 records to around 200 but still the same. I have removed
> all the linked pictures, voice recording and ringtomes which the SE
> transferred without problem but still no go.
> I have tried sending them all to my PC which puts them in Outlook
> where they can then be selected as a block and sent by BT but the V3
> can only cope one at a time.
> Am I missing something obvious or am I really going to have to
> transfer them one at a time?
>
> I'm trying to be open minded about this phone as it's the first
> Motorola since a Startac many years ago but so far I'm not impressed.
> The address seach someone else mentions in another recent post seems
> so fundamentally flawed.
>
> --
> Kev-
>
> -
--
wjgiii
- 10-16-2005, 08:40 PM #6BruceRGuest
Re: Transfering phonebook to V3
www.bvrp.com Motorola Mobile Phone Tools
From:wjgiii
[email protected]
> I'm having the same problem. Could you please explain the "phonetool"
> part?
> Thanks
> wjg
>
> Kevin Spin Wrote:
>> Thanks for the suggestion, Bruce.
>> I got there in the end by sending the full phonebook to the PC
>> (Outlook),
>> exporting from Outlook as CSV then importing the csv to Phonetools
>> and synchonising. Took a bit of messing about with fields but is OK
>> now.
>>
>> Kev
>>
>>
>>
>> "BruceR" [email protected] wrote in message
>> news:[email protected]
>> Your best bet would be a program like Data Pilot (www.datapilot.com)
>> that
>> works with pretty much any phone. It will let you download the
>> phonebook
>> to the program, massage it as required to meet the Moto format, and
>> upload
>> it to the v3.
>>
>> From:Kevin Spin
>> [email protected]
>> -
>> I just got an "upgrade" to a V3 to replace by old SE Z600.
>> I am trying to transfer my phonebook across. When I did this going
>> from a T68i to the Z600 it was simple - Send all by bluetooth.
>> If I try this with the V3 is seems to transfer but the V3 comes up
>> with a message "Entire phonebook too large to open". I have reduced
>> it from 350 records to around 200 but still the same. I have removed
>> all the linked pictures, voice recording and ringtomes which the SE
>> transferred without problem but still no go.
>> I have tried sending them all to my PC which puts them in Outlook
>> where they can then be selected as a block and sent by BT but the V3
>> can only cope one at a time.
>> Am I missing something obvious or am I really going to have to
>> transfer them one at a time?
>>
>> I'm trying to be open minded about this phone as it's the first
>> Motorola since a Startac many years ago but so far I'm not impressed.
>> The address seach someone else mentions in another recent post seems
>> so fundamentally flawed.
>>
>> --
>> Kev-
>>
>> -
>
>
> --
> wjgiii
Similar Threads
- alt.cellular.verizon
- alt.cellular.attws
- alt.cellular.verizon
- alt.cellular.verizon
- alt.cellular.motorola
Immerse Yourself in Sensual Massage on rubpage
in Chit Chat