Results 1 to 10 of 10
  1. #1
    Steve K
    Guest
    Hello,

    Does anyone have info on how to put Nokia 6310 into car kit hands free mode.
    I have just had a look at
    http://www.panuworld.net/nuukiaworld...iset/index.htm which has
    info on the 6110, however, this does not work on the 6310.

    Steve










    See More: Nokia 6310 Hands free kit info




  2. #2
    John Phillips
    Guest

    Re: Nokia 6310 Hands free kit info



    On Sun, 2 Jan 2005, at 20:29:48 [GMT +1100] (20:29:48 Sunday, 2 January 2005
    where I live) "Steve K" wrote:

    > Does anyone have info on how to put Nokia 6310 into car kit hands free mode.


    You can only do this during or after the phone has been inserted in the car
    kit, with the ignition on.

    You have a new menu option available (don't ask me where, probably under
    accessories, as it is a long time since I used the 6310i, unfortunately).

    --
    Hmmm, fence must still be down over at the funny farm....




  3. #3
    Steve K
    Guest

    Re: Nokia 6310 Hands free kit info

    Thanks for the prompt reply, however, perhaps I need to explain the
    situation further. I have a non-genuine 5110/6110 car kit that works
    well, I whish make it work with the Nokia 6310. The 5110 only needed a 10k
    resistor across the inputs to make it work. Does anyone know if there is an
    equivalent mod for the 6310?

    Steve




    "John Phillips" <[email protected]> wrote in message
    news:[email protected]
    >
    >
    > On Sun, 2 Jan 2005, at 20:29:48 [GMT +1100] (20:29:48 Sunday, 2 January

    2005
    > where I live) "Steve K" wrote:
    >
    > > Does anyone have info on how to put Nokia 6310 into car kit hands free

    mode.
    >
    > You can only do this during or after the phone has been inserted in the

    car
    > kit, with the ignition on.
    >
    > You have a new menu option available (don't ask me where, probably under
    > accessories, as it is a long time since I used the 6310i, unfortunately).
    >
    > --
    > Hmmm, fence must still be down over at the funny farm....
    >






  4. #4
    Lars-Erik Østerud
    Guest

    Re: Nokia 6310 Hands free kit info

    Steve K skrev:

    > situation further. I have a non-genuine 5110/6110 car kit that works
    > well, I whish make it work with the Nokia 6310. The 5110 only needed a 10k
    > resistor across the inputs to make it work. Does anyone know if there is an
    > equivalent mod for the 6310?


    He he, the 6310i doesn't work with the non-Nokia kits :-(
    Had one myself (had a 6110 and a 6210 before that worked)

    Don't know what Nokia has done :-/

    --
    Lars-Erik - http://home.chello.no/~larse/ - ICQ # 7297605
    Win98se, Asus P4PE, 2.53 GHz, Asus V8420 (Ti4200), SB-Live!



  5. #5
    Rv!
    Guest

    Re: Nokia 6310 Hands free kit info

    > Does anyone have info on how to put Nokia 6310 into car kit hands free mode.
    > I have just had a look at
    > http://www.panuworld.net/nuukiaworld...iset/index.htm which has
    > info on the 6110, however, this does not work on the 6310.


    Will this help?
    http://www.nobbi.com/steck_nok.htm





  6. #6
    Steve K
    Guest

    Re: Nokia 6310 Hands free kit info

    Its the best info I have had so far.

    Thanks.


    "Rv!" <[email protected]> wrote in message
    news:[email protected]
    > > Does anyone have info on how to put Nokia 6310 into car kit hands free

    mode.
    > > I have just had a look at
    > > http://www.panuworld.net/nuukiaworld...iset/index.htm which

    has
    > > info on the 6110, however, this does not work on the 6310.

    >
    > Will this help?
    > http://www.nobbi.com/steck_nok.htm
    >
    >






  7. #7
    Rv!
    Guest

    Re: Nokia 6310 Hands free kit info

    I just checked an old headset I had around on my 6310i.

    It has a resistance value or just over 1K from "MIC / XMIC"
    to "SGND" which appears to put it into headset mode.
    Current flow is 57uA micro-amp when shorted directly.

    "EAR / XEAR" is held to "SGND" via 100ohm when the
    "hang up/answer" button is pressed. This pin "charges up"
    so must be coupled with a capacitor of sorts inside the
    "button controller" which is welded shut. This agrees
    with the fact no resistance can be measured at these pair.

    I know this isn't exactly car kit mode, but will heaset mode
    do instead?

    Rv!







  8. #8
    Steve K
    Guest

    Re: Nokia 6310 Hands free kit info

    Rv,

    I am going to give it try this week. However, the problem I am likely to
    encounter is that in handset mode the pre amp on the mic is on.

    Steve



    "Rv!" <[email protected]> wrote in message
    news:[email protected]
    > I just checked an old headset I had around on my 6310i.
    >
    > It has a resistance value or just over 1K from "MIC / XMIC"
    > to "SGND" which appears to put it into headset mode.
    > Current flow is 57uA micro-amp when shorted directly.
    >
    > "EAR / XEAR" is held to "SGND" via 100ohm when the
    > "hang up/answer" button is pressed. This pin "charges up"
    > so must be coupled with a capacitor of sorts inside the
    > "button controller" which is welded shut. This agrees
    > with the fact no resistance can be measured at these pair.
    >
    > I know this isn't exactly car kit mode, but will heaset mode
    > do instead?
    >
    > Rv!
    >
    >
    >
    >






  9. #9
    Steve K
    Guest

    Re: Nokia 6310 Hands free kit info

    Rv,

    Just tried putting the 1K across the mic. Put the phone into headset mode,
    however, massive feedback. I presume due to the pre-amp stage being on.
    I'm thinking about putting a resistor divider network on the input stage.

    Steve

    "Steve K" <[email protected]> wrote in message
    news:[email protected]
    > Rv,
    >
    > I am going to give it try this week. However, the problem I am likely to
    > encounter is that in handset mode the pre amp on the mic is on.
    >
    > Steve
    >
    >
    >
    > "Rv!" <[email protected]> wrote in message
    > news:[email protected]
    > > I just checked an old headset I had around on my 6310i.
    > >
    > > It has a resistance value or just over 1K from "MIC / XMIC"
    > > to "SGND" which appears to put it into headset mode.
    > > Current flow is 57uA micro-amp when shorted directly.
    > >
    > > "EAR / XEAR" is held to "SGND" via 100ohm when the
    > > "hang up/answer" button is pressed. This pin "charges up"
    > > so must be coupled with a capacitor of sorts inside the
    > > "button controller" which is welded shut. This agrees
    > > with the fact no resistance can be measured at these pair.
    > >
    > > I know this isn't exactly car kit mode, but will heaset mode
    > > do instead?
    > >
    > > Rv!
    > >
    > >
    > >
    > >

    >
    >






  10. #10
    Rv!
    Guest

    Re: Nokia 6310 Hands free kit info


    >
    > Just tried putting the 1K across the mic. Put the phone into headset mode,
    > however, massive feedback. I presume due to the pre-amp stage being on.
    > I'm thinking about putting a resistor divider network on the input stage.


    Thant might work but of course you will increase the noise a lot by reducing
    the signal like this, before the preamp. At least we might be going the right
    direction.

    Robertv!





  • Similar Threads