Results 1 to 3 of 3
  1. #1
    Raj
    Guest
    Hey, i know this is old tech and all that, but ive got an old 3210 which if
    i remeber right i messed up big time by flashing it. cant remember exactly
    what happened coz it was a long time ago, but basicly the phone wont swithc
    on and will not acknoladge the charger being plugged in( battery is prob
    dead to).

    Ive tried software called "Nokia flash tool" but when it says switch phone
    on, i cant! i tried but failed. eventuially the soft comes back with
    "phone NOT respond"
    and then " preloader init error- phone RAM is bad"

    Any ideas as to how ican get this phone working again?
    perhaps diff software?

    Cheers

    Raj





    See More: flashing 3210




  2. #2
    Mark H
    Guest

    Re: flashing 3210

    > Hey, i know this is old tech and all that, but ive got an old 3210 which
    if
    > i remeber right i messed up big time by flashing it. cant remember exactly
    > what happened coz it was a long time ago, but basicly the phone wont

    swithc
    > on and will not acknoladge the charger being plugged in( battery is prob
    > dead to).
    >
    > Ive tried software called "Nokia flash tool" but when it says switch phone
    > on, i cant! i tried but failed. eventuially the soft comes back with
    > "phone NOT respond"
    > and then " preloader init error- phone RAM is bad"
    >
    > Any ideas as to how ican get this phone working again?
    > perhaps diff software?


    Take it to a repair shop, spend 10x the cost of a new phone to get it
    working again if you're that desperate.
    Probably the flash chip has ****ed itself after your attempt at flashing.

    If you manage to source a charged battery, or a desktop charger that will
    charge the battery, or lo and behold read a bit of Google to find out how to
    charge it without the phone, you can reflash it with the original ROM that I
    sure hope you read from the phone and saved first.

    If of course you didn't read the original ROM first in case of ****up, it'll
    make a handy housebrick, paperweight, or self-defence Taiwanese throwing
    lump.

    -mark





  3. #3
    Raj
    Guest

    Re: flashing 3210

    "Mark H" <nukeleerATinternodeDOTonDOTnetREMOVECAPSAU> wrote in message
    news:[email protected]
    >> Hey, i know this is old tech and all that, but ive got an old 3210 which

    > if
    >> i remeber right i messed up big time by flashing it. cant remember
    >> exactly
    >> what happened coz it was a long time ago, but basicly the phone wont

    > swithc
    >> on and will not acknoladge the charger being plugged in( battery is prob
    >> dead to).
    >>
    >> Ive tried software called "Nokia flash tool" but when it says switch
    >> phone
    >> on, i cant! i tried but failed. eventuially the soft comes back with
    >> "phone NOT respond"
    >> and then " preloader init error- phone RAM is bad"
    >>
    >> Any ideas as to how ican get this phone working again?
    >> perhaps diff software?

    >
    > Take it to a repair shop, spend 10x the cost of a new phone to get it
    > working again if you're that desperate.
    > Probably the flash chip has ****ed itself after your attempt at flashing.
    >
    > If you manage to source a charged battery, or a desktop charger that will
    > charge the battery, or lo and behold read a bit of Google to find out how
    > to
    > charge it without the phone, you can reflash it with the original ROM that
    > I
    > sure hope you read from the phone and saved first.
    >
    > If of course you didn't read the original ROM first in case of ****up,
    > it'll
    > make a handy housebrick, paperweight, or self-defence Taiwanese throwing
    > lump.
    >
    > -mark
    >
    >


    Thanks for the info, yes i do have a backup of the original rom, and can get
    the battery charged.
    Any recommendations for software to use?

    Raj





  • Similar Threads