3310 interface with PC details

Hi
I have purchased data cable fro Nokia 3310. I am able to access 3310 using
logomakes.
I am intrested in getting protocol for access 3310 from PC ( by writing my
own application)
Can some one give me information on following

1) At what boud rate 3310 works with datacable

2) When i keep boud rate at 9600 and start mobile i get some junk data in
serial port this may be because of boud rate problem or data is non ascii

3) From where i can get protocol information so that i can access phone book
and send sms using datacable through PC.

4) Is there any sample program available for this.

5) whether 3310 supports AT command or any other protocol is used to
communicate for this

Thanks and regards
Pankaj Zanwar

[email protected]

---

› See More: 3310 interface with PC details

"Pankaj Zanwar" <[email protected]> wrote in message
news:[email protected]...
| Hi
| I have purchased data cable fro Nokia 3310. I am able to access 3310 using
| logomakes.
>>> isnt it logomanager?

| I am intrested in getting protocol for access 3310 from PC ( by writing my
| own application)
| Can some one give me information on following
|
| 1) At what boud rate 3310 works with datacable
>>>mine works at 115200

|
| 2) When i keep boud rate at 9600 and start mobile i get some junk data in
| serial port this may be because of boud rate problem or data is non ascii
>>>data is thru MBUS/FBUS protocols? or d'ya mean data dump?

|
| 3) From where i can get protocol information so that i can access phone
book
| and send sms using datacable through PC.
|
| 4) Is there any sample program available for this.
|
| 5) whether 3310 supports AT command or any other protocol is used to
| communicate for this
>>>3310 has no modem, so how are u gonna send AT commands to it? 6310 (and
some others) supports AT commands though

|
| Thanks and regards
| Pankaj Zanwar
|
| [email protected]
|
|

Hi

Thanks for information
I want commands which I can send using MBUS/ FBUS interface to access
information from 3310 and send SMS.
You are refering to book can u please let me know the name of book which has
this information. or web site from where i can get this information. or any
sample program wrriten from where i can get protocol information.

Thanks
Pankaj


"tuned by RÄZO" <[email protected]> wrote in message
news:[email protected]...
> "Pankaj Zanwar" <[email protected]> wrote in message
> news:[email protected]...
> | Hi
> | I have purchased data cable fro Nokia 3310. I am able to access 3310
using
> | logomakes.
> >>> isnt it logomanager?
>
> | I am intrested in getting protocol for access 3310 from PC ( by writing
my
> | own application)
> | Can some one give me information on following
> |
> | 1) At what boud rate 3310 works with datacable
> >>>mine works at 115200
>
> |
> | 2) When i keep boud rate at 9600 and start mobile i get some junk data
in
> | serial port this may be because of boud rate problem or data is non
ascii
> >>>data is thru MBUS/FBUS protocols? or d'ya mean data dump?
>
> |
> | 3) From where i can get protocol information so that i can access phone
> book
> | and send sms using datacable through PC.
> |
> | 4) Is there any sample program available for this.
> |
> | 5) whether 3310 supports AT command or any other protocol is used to
> | communicate for this
> >>>3310 has no modem, so how are u gonna send AT commands to it? 6310 (and
> some others) supports AT commands though
>
> |
> | Thanks and regards
> | Pankaj Zanwar
> |
> | [email protected]
> |
> |
>
>

If you wish to develop your own application for this model, we can offer our
powerful developing tools for this model:

1) Oxygen SMS ActiveX Control http://www.smsactivex.net

Enables to view battery and signal level, manage SMS messages and 'Plus'
edition also enables to manage plain tones (upload, send with SMS messages)
and logos (operator, start-up and caller group ones).
The control can be incorporated into any programming environment that
supports ActiveX controls (e.g. ASP, Microsoft Visual Basic, Microsoft
Visual C++, Microsoft Access, Borland Delphi, Borland C++ Builder, ASP,
etc.).


2) TOxygen SMS Component for Borland Delphi and C++ builder- the most
powerful component for SMS management. TOxygenSMS component is designed to
give an access to SMS and Calendar capabilities of Nokia GSM phone from a
Windows program.
SMS section allows you to send, receive, read and delete messages from
Inbox, read and write default SMS centre number and many other features like
battery and signal level, hardware and software revision and date, phone
model type and IMEI. You can send simple text, Unicode strings, flashing and
picture messages, ringtones, Operator Logos and CLI Logos.

Learn more on official TOxygen SMS Component site:
http://www.oxygensoftware.co.uk/products/tsms/

Both of our products require technological F-Bus cable for data
communication.

--
If you will have any further questions, don't hesitate to contact us.
Best regards! Tech support department
Oxygen Software- tools for your Nokia
Oxygen Phone Manager II - all you want from Nokia
[email protected]
http://www.opm-2.com
http://www.smsactivex.net
http://www.oxygensoftware.co.uk
"Pankaj Zanwar" <[email protected]> ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ × ÎÏ×ÏÓÔÑÈ ÓÌÅÄÕÀÝÅÅ:
news:[email protected]...
> Hi
> I have purchased data cable fro Nokia 3310. I am able to access 3310 using
> logomakes.
> I am intrested in getting protocol for access 3310 from PC ( by writing my
> own application)
> Can some one give me information on following
>
> 1) At what boud rate 3310 works with datacable
>
> 2) When i keep boud rate at 9600 and start mobile i get some junk data in
> serial port this may be because of boud rate problem or data is non ascii
>
> 3) From where i can get protocol information so that i can access phone
book
> and send sms using datacable through PC.
>
> 4) Is there any sample program available for this.
>
> 5) whether 3310 supports AT command or any other protocol is used to
> communicate for this
>
> Thanks and regards
> Pankaj Zanwar
>
> [email protected]
>
>

Hi

Thanks for information
I am looking for Protocol information so that i can interface 3310 with my
embedded system and send SMS. This is study project i have give to college
students and unless i get protocol information i will not be able to send
SMS using small embeddded system.
If you can help in getting following information it will be nice
1) Boud rate at which 3310 works
2) what protocol is used to communicate with 3310 and any command set that
can be used to send SMS

Thanks and Regards


"Oxygen Software" <[email protected]> wrote in message
news:[email protected]...
> If you wish to develop your own application for this model, we can offer
our
> powerful developing tools for this model:
>
> 1) Oxygen SMS ActiveX Control http://www.smsactivex.net
>
> Enables to view battery and signal level, manage SMS messages and 'Plus'
> edition also enables to manage plain tones (upload, send with SMS
messages)
> and logos (operator, start-up and caller group ones).
> The control can be incorporated into any programming environment that
> supports ActiveX controls (e.g. ASP, Microsoft Visual Basic, Microsoft
> Visual C++, Microsoft Access, Borland Delphi, Borland C++ Builder, ASP,
> etc.).
>
>
> 2) TOxygen SMS Component for Borland Delphi and C++ builder- the most
> powerful component for SMS management. TOxygenSMS component is designed to
> give an access to SMS and Calendar capabilities of Nokia GSM phone from a
> Windows program.
> SMS section allows you to send, receive, read and delete messages from
> Inbox, read and write default SMS centre number and many other features
like
> battery and signal level, hardware and software revision and date, phone
> model type and IMEI. You can send simple text, Unicode strings, flashing
and
> picture messages, ringtones, Operator Logos and CLI Logos.
>
> Learn more on official TOxygen SMS Component site:
> http://www.oxygensoftware.co.uk/products/tsms/
>
> Both of our products require technological F-Bus cable for data
> communication.
>
> --
> If you will have any further questions, don't hesitate to contact us.
> Best regards! Tech support department
> Oxygen Software- tools for your Nokia
> Oxygen Phone Manager II - all you want from Nokia
> [email protected]
> http://www.opm-2.com
> http://www.smsactivex.net
> http://www.oxygensoftware.co.uk
> "Pankaj Zanwar" <[email protected]> ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ × ÎÏ×ÏÓÔÑÈ
ÓÌÅÄÕÀÝÅÅ:
> news:[email protected]...
> > Hi
> > I have purchased data cable fro Nokia 3310. I am able to access 3310
using
> > logomakes.
> > I am intrested in getting protocol for access 3310 from PC ( by writing
my
> > own application)
> > Can some one give me information on following
> >
> > 1) At what boud rate 3310 works with datacable
> >
> > 2) When i keep boud rate at 9600 and start mobile i get some junk data
in
> > serial port this may be because of boud rate problem or data is non
ascii
> >
> > 3) From where i can get protocol information so that i can access phone
> book
> > and send sms using datacable through PC.
> >
> > 4) Is there any sample program available for this.
> >
> > 5) whether 3310 supports AT command or any other protocol is used to
> > communicate for this
> >
> > Thanks and regards
> > Pankaj Zanwar
> >
> > [email protected]
> >
> >
>
>

http://www.embedtronics.com/nokia/fbus.html
hope this site helpful