Nokia 3410 unlocking

I have a 3410 which I've had for more than a year so that the network has
given me the unlock codes. Two 10 digit codes. They then gave a very cryptic
unlock procedure:
remove sim and turn on the phone
press #pw++1# and then #pw++2#
the should now be unlocked.
Where do I insert the 2 codes that they gave me?
If I enter #pw++ (using the * and # keys) I see the corresponding characters
in the screen, but when I try to press the last # button, all I hear is the
key beep. No # comes on the screen. No matter where I enter the code they
gave me, it doesnt work.
eg.
#pw++11234567890#
#pw++1#1234567890
#pw1234567890++1#

And the network has supplied the codes, fulfilling their obligation. Al my
requests for support end up on their web site with the same cryptic
instuctions.

I've tried every imagineable combination but to no avail. Can anyone help
me??

Thanks in advance
Peter

---

› See More: Nokia 3410 unlocking

To unlock your phone now, follow these simple steps:

1) Take out the SIM card from the phone.
2) Type in the following code in the phone:

First Code

After pressing this code the phone should be unlocked.
If not type in the following (still without the SIM card in the phone):

Second Code

Remember: You only have 5 times to enter the code, after that - only a
cable solution can help you.

Further instructions

To show p in the phones display - just press * three times within two
seconds.
To show w in the phones display - just press * four times within two
seconds.
To show + in the phones display - just press * twice within two seconds.


"peter" <[email protected]> wrote in article
<[email protected]>:
> I have a 3410 which I've had for more than a year so that the network has
> given me the unlock codes. Two 10 digit codes. They then gave a very cryptic
> unlock procedure:
> remove sim and turn on the phone
> press #pw++1# and then #pw++2#
> the should now be unlocked.
> Where do I insert the 2 codes that they gave me?
> If I enter #pw++ (using the * and # keys) I see the corresponding characters
> in the screen, but when I try to press the last # button, all I hear is the
> key beep. No # comes on the screen. No matter where I enter the code they
> gave me, it doesnt work.
> eg.
> #pw++11234567890#
> #pw++1#1234567890
> #pw1234567890++1#
>
> And the network has supplied the codes, fulfilling their obligation. Al my
> requests for support end up on their web site with the same cryptic
> instuctions.
>
> I've tried every imagineable combination but to no avail. Can anyone help
> me??
>
> Thanks in advance
> Peter
>
>

[posted via phonescoop.com]

peter <[email protected]> napisal nam:

> I have a 3410 which I've had for more than a year so that the network
> has given me the unlock codes. Two 10 digit codes. They then gave a


IMHO you can not unlock dtc3 phone (3410) by code... am I right?

:
: IMHO you can not unlock dtc3 phone (3410) by code... am I right?

No, the networks can calculate unloc codes for DCT3 phones... seems it has
never been cracked... unlike the DCT4

I too could be wrong there, about it never been cracked.

Steven.

Dom,
Thanks for your response. As you state I can only try 5 times to enter the
codes. You saÿ that I should remove the sim and enter the codes? Without the
PW stuff? First code, is that the 10 digit code they gave me? (5465444445).
The second code being 5339120448, what would be the *exact* key press order?
If I only have one shot left, I don't want to throw it away by experimenting
anymore.
Thanks in advance for your help
Peter.

"Dom Matuz" <[email protected]> schreef in bericht
news:[email protected]...
> To unlock your phone now, follow these simple steps:
>
> 1) Take out the SIM card from the phone.
> 2) Type in the following code in the phone:
>
> First Code
>
> After pressing this code the phone should be unlocked.
> If not type in the following (still without the SIM card in the phone):
>
> Second Code
>
> Remember: You only have 5 times to enter the code, after that - only a
> cable solution can help you.
>
> Further instructions
>
> To show p in the phones display - just press * three times within two
> seconds.
> To show w in the phones display - just press * four times within two
> seconds.
> To show + in the phones display - just press * twice within two seconds.
>
>
> "peter" <[email protected]> wrote in article
> <[email protected]>:
> > I have a 3410 which I've had for more than a year so that the network
has
> > given me the unlock codes. Two 10 digit codes. They then gave a very
cryptic
> > unlock procedure:
> > remove sim and turn on the phone
> > press #pw++1# and then #pw++2#
> > the should now be unlocked.
> > Where do I insert the 2 codes that they gave me?
> > If I enter #pw++ (using the * and # keys) I see the corresponding
characters
> > in the screen, but when I try to press the last # button, all I hear is
the
> > key beep. No # comes on the screen. No matter where I enter the code
they
> > gave me, it doesnt work.
> > eg.
> > #pw++11234567890#
> > #pw++1#1234567890
> > #pw1234567890++1#
> >
> > And the network has supplied the codes, fulfilling their obligation. Al
my
> > requests for support end up on their web site with the same cryptic
> > instuctions.
> >
> > I've tried every imagineable combination but to no avail. Can anyone
help
> > me??
> >
> > Thanks in advance
> > Peter
> >
> >
>
> [posted via phonescoop.com]

B@ndit <[email protected]> napisal nam:

>> IMHO you can not unlock dtc3 phone (3410) by code... am I right?
>
> No, the networks can calculate unloc codes for DCT3 phones... seems
> it has never been cracked... unlike the DCT4
>
> I too could be wrong there, about it never been cracked.
>

OK I see, thank you.
Krzysiek.