6310/Oxygen and PC Suite problems

Hi,
Hoping someone can help me out here as the situation has baffled me so
far. The situation is:

6310 (V5.01) connected to PC using genuine Nokia data cable, allegedly on
COM2
6310i (V5.50) connected to the PC using Bluetooth and using COM5
Nokia PC Suite (V4.5.8805) installed
Oxygen Phone Manager II installed, both phones registered and set to connect
on the above ports.

The 6310i connects no problem to both Nokia Data Suite and Oxygen, so I am
fine with that. Here is the problem.....after starting the computer and
Oxygen, the program will connect to the 6310i but not the 6310 (says 'phone
not found'). Starting Nokia Data Suite and selecting the serial connection,
it will see the 6310 and connect fine (so no fault with the cable) and will
do the same if i select the 6310i using bluetooth. The problem occurs when I
shut down NDS and a while later restart it, select the button for a serial
connection and it says no phone found, even when I specify COM2 on the
advanced settings. I am thinking that somewhere something is blocking the
COM2 port, but I have no idea what or why.

Would be grateful to hear from anyone who has had a similar problem or from
anyone who has any ideas as to how to rectify the problem. I have
uninstalled and reinstalled both Oxygen and NDS several times but still come
up with the same problem. I much prefer the Oxygen software and will be
happy just to have that recognise both phones.

Hopefully someone will be able to help.

Thanks.

M

Remove 'nospam' to reply

---

› See More: 6310/Oxygen and PC Suite problems

Hi again,
Please ignore the previous post as I have now sorted out the
problem, which was that I had not specified the correct type of data cable
for the COM2 serial connection in Oxygen Phone Manager.

Thanks anyway and hope you all have a peaceful Merry Christmas.

Cheers

M



"M & C" <[email protected]> wrote in message
news:[email protected]...
> Hi,
> Hoping someone can help me out here as the situation has baffled me
so
> far. The situation is:
>
> 6310 (V5.01) connected to PC using genuine Nokia data cable, allegedly on
> COM2
> 6310i (V5.50) connected to the PC using Bluetooth and using COM5
> Nokia PC Suite (V4.5.8805) installed
> Oxygen Phone Manager II installed, both phones registered and set to
connect
> on the above ports.
>
> The 6310i connects no problem to both Nokia Data Suite and Oxygen, so I am
> fine with that. Here is the problem.....after starting the computer and
> Oxygen, the program will connect to the 6310i but not the 6310 (says
'phone
> not found'). Starting Nokia Data Suite and selecting the serial
connection,
> it will see the 6310 and connect fine (so no fault with the cable) and
will
> do the same if i select the 6310i using bluetooth. The problem occurs when
I
> shut down NDS and a while later restart it, select the button for a serial
> connection and it says no phone found, even when I specify COM2 on the
> advanced settings. I am thinking that somewhere something is blocking the
> COM2 port, but I have no idea what or why.
>
> Would be grateful to hear from anyone who has had a similar problem or
from
> anyone who has any ideas as to how to rectify the problem. I have
> uninstalled and reinstalled both Oxygen and NDS several times but still
come
> up with the same problem. I much prefer the Oxygen software and will be
> happy just to have that recognise both phones.
>
> Hopefully someone will be able to help.
>
> Thanks.
>
> M
>
> Remove 'nospam' to reply
>
>

Hello, M!
You wrote on Mon, 22 Dec 2003 11:40:34 -0000:

MC> Hi again,
MC> Please ignore the previous post as I have now sorted out
MC> the problem, which was that I had not specified the correct type of
MC> data cable for the COM2 serial connection in Oxygen Phone Manager.

If you will have any further questions or problems with Oxygen Phone Manager
please do not hesitate to contact our support service by e-mail or support
forum at http://www.oxygensoftware.com/forum.

With best regards, Oleg Fyodorov.
Oxygen Software - tools for your Nokia.
Oxygen Phone Manager II - all you want from your Nokia.
[email protected]
http://www.oxygensoftware.com
http://www.oxygensoftware.co.uk


MC> Thanks anyway and hope you all have a peaceful Merry Christmas.

MC> Cheers

MC> M

MC> "M & C" <[email protected]> wrote in message
MC> news:[email protected]...
??>> Hi,
??>> Hoping someone can help me out here as the situation has baffled
??>> me
MC> so
??>> far. The situation is:
??>>
??>> 6310 (V5.01) connected to PC using genuine Nokia data cable, allegedly
??>> on COM2 6310i (V5.50) connected to the PC using Bluetooth and using
??>> COM5 Nokia PC Suite (V4.5.8805) installed Oxygen Phone Manager II
??>> installed, both phones registered and set to
MC> connect
??>> on the above ports.
??>>
??>> The 6310i connects no problem to both Nokia Data Suite and Oxygen, so
??>> I am fine with that. Here is the problem.....after starting the
??>> computer and Oxygen, the program will connect to the 6310i but not the
??>> 6310 (says
MC> 'phone
??>> not found'). Starting Nokia Data Suite and selecting the serial
MC> connection,
??>> it will see the 6310 and connect fine (so no fault with the cable) and
MC> will
??>> do the same if i select the 6310i using bluetooth. The problem occurs
??>> when
MC> I
??>> shut down NDS and a while later restart it, select the button for a
??>> serial connection and it says no phone found, even when I specify COM2
??>> on the advanced settings. I am thinking that somewhere something is
??>> blocking the COM2 port, but I have no idea what or why. Would be
??>> grateful to hear from anyone who has had a similar problem or
MC> from
??>> anyone who has any ideas as to how to rectify the problem. I have
??>> uninstalled and reinstalled both Oxygen and NDS several times but
??>> still
MC> come
??>> up with the same problem. I much prefer the Oxygen software and will
??>> be happy just to have that recognise both phones. Hopefully someone
??>> will be able to help. Thanks. M Remove 'nospam' to reply

Ric wrote:

> Hello,
>
> I've been happily using Nokia PC suite connection to synch my 6210 with
> Outlook for several years. Suddenly I can no longer get a connection. Oxygen
> can read the phone fine, so I know there is nothing wrong with my cable or
> COM port.
>
> Any ideas?
>
> I have just "upgraded" to Office XP - but I don't see why that should stop
> the Nokia phone from connecting - after all Oxygen can still see it.
>

Will PC Suite not connect at all, or just not sync with Outlook?

What about your Windows system? Did you upgrade that too?

Mark

As I said it just will not connect. It appears to be nothing to do with
Outlook XP. And I still have Windows ME