Results 1 to 10 of 10
  1. #1
    RexyBlue
    Guest
    Possible? If so, anyone know how?



    ----------------------------
    To email me, remove the zz.



    See More: Forcing a SPH A-620 onto 800 CDMA Roam?




  2. #2
    freshmeat
    Guest

    Re: Forcing a SPH A-620 onto 800 CDMA Roam?


    maybe it has a setting for analog only?

    --
    Posted at SprintUsers.com - Your place for everything Sprint PCS
    Free wireless access @ www.SprintUsers.com/wap




  3. #3
    RexyBlue
    Guest

    Re: Forcing a SPH A-620 onto 800 CDMA Roam?

    Don't want analog. I want to force it onto 800mhz CDMA.

    On Wed, 3 Sep 2003 22:01:13 -0400, freshmeat
    <[email protected]> wrote:

    >
    >maybe it has a setting for analog only?





    ----------------------------
    To email me, remove the zz.



  4. #4
    hatoncat
    Guest

    Re: Forcing a SPH A-620 onto 800 CDMA Roam?


    1) Set the phone to do Roaming only

    2) Menu > 8 > 1 > 0 > 040793 > CDMA Only

    --
    Posted at SprintUsers.com - Your place for everything Sprint PCS
    Free wireless access @ www.SprintUsers.com/wap




  5. #5
    smittythepig
    Guest

    Re: Forcing a SPH A-620 onto 800 CDMA Roam?


    if you enter cdma only through the method above, is the only way to
    cancel that power cycling the phone?

    --
    Posted at SprintUsers.com - Your place for everything Sprint PCS
    Free wireless access @ www.SprintUsers.com/wap




  6. #6
    Thomas T. Veldhouse
    Guest

    Re: Forcing a SPH A-620 onto 800 CDMA Roam?


    "smittythepig" <[email protected]> wrote in message
    news:[email protected]
    >
    > if you enter cdma only through the method above, is the only way to
    > cancel that power cycling the phone?
    >


    Doing it again might cancel it. You can certainly find out by going to an
    area where you roam digitally and trying it. BTW, it is not roam only, it
    is CDMA only, and on my A500, it isn't even that. It simply forces the use
    of an CDMA 800 signal when available rather than using AMPS. It still will
    use AMPS in the absense of any other available signal. I suspect the same
    goes for the VGA1000.

    Tom Veldhouse





  7. #7
    Peter Shifrin
    Guest

    Re: Forcing a SPH A-620 onto 800 CDMA Roam?

    "Thomas T. Veldhouse" <[email protected]> wrote in message news:<[email protected]>...
    > "smittythepig" <[email protected]> wrote in message
    > news:[email protected]
    > >
    > > if you enter cdma only through the method above, is the only way to
    > > cancel that power cycling the phone?
    > >

    >
    > Doing it again might cancel it. You can certainly find out by going to an
    > area where you roam digitally and trying it. BTW, it is not roam only, it
    > is CDMA only, and on my A500, it isn't even that. It simply forces the use
    > of an CDMA 800 signal when available rather than using AMPS. It still will
    > use AMPS in the absense of any other available signal. I suspect the same
    > goes for the VGA1000.
    >
    > Tom Veldhouse


    Is there a way to do this on the Sanyo 8100?



  8. #8
    hatoncat
    Guest

    Re: Forcing a SPH A-620 onto 800 CDMA Roam?


    Peter Shifrin wrote:
    > *"Thomas T. Veldhouse" <[email protected]> wrote in message
    > news:<[email protected]>...
    > > "smittythepig" <[email protected]> wrote in message
    > > news:[email protected]
    > > >
    > > > if you enter cdma only through the method above, is the only way

    > to
    > > > cancel that power cycling the phone?
    > > >

    > >
    > > Doing it again might cancel it. You can certainly find out by

    > going to an
    > > area where you roam digitally and trying it. BTW, it is not roam

    > only, it
    > > is CDMA only, and on my A500, it isn't even that. It simply forces

    > the use
    > > of an CDMA 800 signal when available rather than using AMPS. It

    > still will
    > > use AMPS in the absense of any other available signal. I suspect

    > the same
    > > goes for the VGA1000.
    > >
    > > Tom Veldhouse

    >
    > Is there a way to do this on the Sanyo 8100? *


    Not that I'm aware of.

    ------------
    www.sprintpcsinfo.com

    --
    Posted at SprintUsers.com - Your place for everything Sprint PCS
    Free wireless access @ www.SprintUsers.com/wap




  9. #9
    Maokh
    Guest

    Re: Forcing a SPH A-620 onto 800 CDMA Roam?


    > Is there a way to do this on the Sanyo 8100?


    People have suggested to use something like *22800 / *22801 to force
    the phone onto either 800MHz CDMA band, but i havent been able to get
    this to work. It promptly tells me that "activation failed".

    --
    Posted at SprintUsers.com - Your place for everything Sprint PCS
    Free wireless access @ www.SprintUsers.com/wap




  10. #10
    RexyBlue
    Guest

    Re: Forcing a SPH A-620 onto 800 CDMA Roam?

    OK, I tried this. First of all, it seems you can set the phone from
    the menu to analog only, but not roaming only. So I did that.Then when
    I keyed in the codes, all I got is "Pictures Erased." That's it, and
    then it went automatically back to SPCS.

    On Wed, 3 Sep 2003 22:52:09 -0400, hatoncat
    <[email protected]> wrote:

    >
    >1) Set the phone to do Roaming only
    >
    >2) Menu > 8 > 1 > 0 > 040793 > CDMA Only





    ----------------------------
    To email me, remove the zz.



  • Similar Threads