reply to discussion
Results 1 to 1 of 1
  1. #1
    AizaKhan
    AizaKhan is offline
    Phone Addict

    Posts
    472 - liked 7 times
    Blog Entries
    16
    The decision of whether to use Category 5e, 6 or 6a cables to wire your Ethernet network pretty much comes down to cost, data transfer speed and connection distance. All use RJ45 connectors to patch into your network via server, router, computer or other hardware. As well, all support Power over Ethernet (PoE). Otherwise, each cable has a different standard.

    Category 5e
    Cat5e (Category 5 enhanced) is the least expensive, but also the slowest. It supports data transfer speeds up to one Gigabit per second (Gbps) at 100 MHz up to 328 feet. Crosstalk among the wires within the cable is reduced, resulting in less interference and less chance of transmission error. Certainly, it will provide capable performance for most of today’s applications, but Cat5e also leaves less opportunity for upgrading in the future.

    Category 6
    Cat6 plenum cable is pricier and faster than Cat5e, but also limited by distance. Cat6 supports data transfer speeds up to 10 Gbps at 250 MHz with even less (or no) crosstalk interference, due to the cable’s improved insulation. However, its 10 Gbps speed is effective only up to 164 feet. Despite this limitation, Cat6 cabling is more qualified to handle the fast pace of Gigabit Ethernet networks. It’s likely Cat6 will eventually replace HDMI as the audio/video transmission standard in the future.

    Category 6a
    If you’re looking to set yourself up for a successful long-term Gigabit Ethernet network, Cat6a (Category 6 augmented) is the right choice. Yes, it’s more expensive than Cat5e or Cat6, but the hardware you’ll be connecting to your network will only become more sophisticated—not less—as technology grows.
    Cat6a plenum supports the same 10 Gbps transmission speed as Cat6, but up to 328 feet and at 500 MHz. And, of course, with even less crosstalk than Cat6.

    Also to Consider
    Data rates double every 18 months. While Cat5e will likely provide the necessary performance you’re looking for, you may decide that future-proofing your network with Cat6 or Cat6a plenum cable is a safer bet.

    It should be noted that network transmission speed depends on all the components within your network. The transmission speed rating for each standard is theoretical. So, a legacy device that is incapable of Gigabit speeds won’t be able to attain Gigabit speeds just because you use a faster cable.


    See More: Which Ethernet Cable Should You Use For Best Networking
    Last edited by AizaKhan; 03-22-2019 at 03:27 AM.




  • Similar Threads







  • Quick Reply Quick Reply

    If you are already a member, please login above.