Results 1 to 10 of 10
  1. #1
    Fjordur
    Guest
    Hi,
    not sure if this is the right place for my question, if it's not please
    excuse me.

    Here's my problem: my cellular (Sony Ericsson T68i) fell briefly into water.
    I removed the battery and let it dry. The day after, it worked fine 100%.
    After a few hours, the display went dark blue; it doesn't display anything.
    The phone still works, only the screen doesn't although it is powered.
    I disassembled the phone entirely today, rubbed the contacts especially
    those for the display. Still the same.

    Phone vendors tell me it's definitely broken (of course they would) but
    actually my phone works 90%. What could the screen problem be? is it
    hopeless? can I do something?

    Thanks for your time & help
    --
    Fjordur




    See More: [Help] Display problem on cell phone




  2. #2
    Charles Schuler
    Guest

    Re: [Help] Display problem on cell phone

    When water gets into electronic devices it establishes new paths for current
    to flow. Pure water is an insulator but (practically speaking) there is no
    such thing as pure water. Your phone has new and unwanted paths for current
    to flow. Deionized water can be used to flush circuit boards, but this is
    hardly is a viable path for you. Your phone is contaminated and might
    become more disabled as time progresses. Or, it could dry out and heal!





  3. #3
    Fjordur
    Guest

    Re: [Help] Display problem on cell phone

    [email protected], Charles Schuler
    [email protected] 7/01/06 23:41:

    > When water gets into electronic devices it establishes new paths for current
    > to flow. Pure water is an insulator but (practically speaking) there is no
    > such thing as pure water. Your phone has new and unwanted paths for current
    > to flow.

    I understand that, of course
    > Deionized water can be used to flush circuit boards, but this is
    > hardly is a viable path for you. Your phone is contaminated and might
    > become more disabled as time progresses. Or, it could dry out and heal!

    It *is* now dry, after 3 weeks or so, I guess. Or is it not? water still
    left?
    Or do you imply that even after water is evaporated some mineral salts are
    left and create new circuits? in that case, things would be a (simple..!)
    matter of rinsing, right?
    The point is, the phone is functional, only the display is not althought
    it's lit. So its only the display command circuits that don't work.
    Nothing I can do?

    --
    Fjordur




  4. #4
    427Cobraman
    Guest

    Re: Display problem on cell phone

    Head to your local radio shack and get a can of electrical contact
    cleaner and blast it out. Mine went snorkeling with me in Maui last
    fall and I had never transferred my 60+ phone number list to the sim
    card. Blasted it, reassembled, check for operation, no-go, disassemble
    again...5 or 6 times I guess. Finally got it to work but like you with
    no display. Luckily, a co-worker had the same phone and I was able to
    blindly work my way through the menus, copy the numbers to my sim, then
    transfer over to my new phone. No, I never did get the display going.
    Hope it works for you.




  5. #5
    Charles Schuler
    Guest

    Re: [Help] Display problem on cell phone


    "Fjordur" <[email protected]> wrote in message
    news:BFE6A1F9.10AE5%[email protected]...
    > [email protected], Charles Schuler
    > [email protected] 7/01/06 23:41:
    >
    >> When water gets into electronic devices it establishes new paths for
    >> current
    >> to flow. Pure water is an insulator but (practically speaking) there is
    >> no
    >> such thing as pure water. Your phone has new and unwanted paths for
    >> current
    >> to flow.

    > I understand that, of course
    >> Deionized water can be used to flush circuit boards, but this is
    >> hardly is a viable path for you. Your phone is contaminated and might
    >> become more disabled as time progresses. Or, it could dry out and heal!

    > It *is* now dry, after 3 weeks or so, I guess. Or is it not? water still
    > left?
    > Or do you imply that even after water is evaporated some mineral salts are
    > left and create new circuits? in that case, things would be a (simple..!)
    > matter of rinsing, right?
    > The point is, the phone is functional, only the display is not althought
    > it's lit. So its only the display command circuits that don't work.
    > Nothing I can do?


    You can try flushing it thoroughly with deionized water and then drying it
    .... but you run the risk of making it worse. I have done several notebook
    computers that had drinks poured onto the keyboards with mixed results.





  6. #6
    Fjordur
    Guest

    Re: Display problem on cell phone

    [email protected], 427Cobraman
    [email protected] 8/01/06 11:11:

    > Head to your local radio shack and get a can of electrical contact
    > cleaner and blast it out. Mine went snorkeling with me in Maui last
    > fall

    lucky you (for the snorkeling, not for taking your phone with you :-)
    > and I had never transferred my 60+ phone number list to the sim
    > card. Blasted it, reassembled, check for operation, no-go, disassemble
    > again...5 or 6 times I guess. Finally got it to work but like you with
    > no display. Luckily, a co-worker had the same phone and I was able to
    > blindly work my way through the menus, copy the numbers to my sim, then
    > transfer over to my new phone. No, I never did get the display going.
    > Hope it works for you.

    Hmmm...
    Apparently there's not much hope.
    I didn't think of tranferring the numbers to the sim card, always wondered
    what's the use of it, now I know. I understand your sim card wasn't (too)
    affected by the water.

    Thanks to you all who contributed. I guess it really means "trash it and get
    a new phone". Sh.t! (Sorry but I'm really p....d off)
    --
    Fjordur




  7. #7
    matt weber
    Guest

    Re: [Help] Display problem on cell phone

    On Sat, 07 Jan 2006 20:20:17 +0100, Fjordur <[email protected]> wrote:

    >Hi,
    >not sure if this is the right place for my question, if it's not please
    >excuse me.
    >
    >Here's my problem: my cellular (Sony Ericsson T68i) fell briefly into water.
    >I removed the battery and let it dry. The day after, it worked fine 100%.
    >After a few hours, the display went dark blue; it doesn't display anything.
    >The phone still works, only the screen doesn't although it is powered.
    >I disassembled the phone entirely today, rubbed the contacts especially
    >those for the display. Still the same.
    >
    >Phone vendors tell me it's definitely broken (of course they would) but
    >actually my phone works 90%. What could the screen problem be? is it
    >hopeless? can I do something?
    >
    >Thanks for your time & help

    LCD's are very complex devices, at this point it is hard to know
    whether or not the screen or the drivers for the screen have failed.
    The nature of the beast however is that it rarely pays to attempt
    repair at the component level. High specialized equipment is required
    for SMT repairs. At the factory, they can slap the PCB onto a
    signature analysis system, and it will ID the failed component in
    about 10 seconds, and they can decide if it is worth attempting
    repair.



  8. #8
    Caesar Valenti
    Guest

    Re: [Help] Display problem on cell phone

    Fjordur wrote:

    >Hi,
    >not sure if this is the right place for my question, if it's not please
    >excuse me.
    >
    >Here's my problem: my cellular (Sony Ericsson T68i) fell briefly into water.
    >I removed the battery and let it dry. The day after, it worked fine 100%.
    >After a few hours, the display went dark blue; it doesn't display anything.
    >The phone still works, only the screen doesn't although it is powered.
    >I disassembled the phone entirely today, rubbed the contacts especially
    >those for the display. Still the same.
    >
    >Phone vendors tell me it's definitely broken (of course they would) but
    >actually my phone works 90%. What could the screen problem be? is it
    >hopeless? can I do something?
    >
    >Thanks for your time & help
    >
    >

    My daughter had the same phone. The phone committed suicide.
    Apparently when she was out of the room, she got a call. The phone
    vibrated itself off a desk and landed directly into a glass of water
    that was on the floor. I took it apart, tried drying it in an oven (low
    temperature obviously), and spraying it with alcohol....all to no
    avail. I ended up selling it on ebay for parts.

    And if you think that a phone committing suicide is unusual, my daughter
    has a friend that had the same phone that died in the exact same
    method....although I think it may have fallen into a glass of tea.



  9. #9
    Fjordur
    Guest

    Re: [Help] Display problem on cell phone

    OK, I understand fixing the phone is hopeless.
    What about the battery? I take it there's no electronics in it, only
    chemistry, as far as I can remember my physics courses.
    Once in the water => forever lost, or not?
    I'm asking because I have an opportunity to get a new phone which has no
    battery: should I get it and use my [once soaked] battery? or is the battery
    hurt?
    --
    Fjordur




  10. #10
    distar97
    Guest

    Re: Display problem on cell phone

    I've been lucky with soaked cell phones. The faster you can drive out
    the water, the better the odds of success. I use fairly high heat from
    a blow dryer. I also use a microscope to look at as much of the
    circuits I can get to and look for tiny rust spots or anything else
    that doesn't look right, a sharpened toothpick is gentle enough to
    clean whatever I see.
    If the phone still has problems, I leave it powered up. The gentle heat
    of internal working circuitry may be enough to drive off deeply hidden
    moisture the blow dryer can't reach, This is especially true for the
    display, which should not be exposed to the high heat of the blow
    dryer.

    The display is generally the item most prone to irreversable damage. It
    depends on the design. Some displays allow water to wick in. Heat will
    not help if this happens. Others are fairly water tight. I recently
    salvaged a phone that fell in 3 feet of muddy water. It took 10 minutes
    to find it and 2 hours to get high heat on it. The display appeared
    lost but came back perfectly after sitting powered up 24 hours.

    BTW, modern batteries may indeed have electronics inside them to watch
    over charge conditions. My laptop battery has a well populated circuit
    board aside from the usual thermal fuse.

    Dennis Harper




  • Similar Threads