Can't Sync T610 - TDK Bluetooth - Windows XP SP1 - Outlook 2002

I'm pulling my hair out. I have now spent 2 days solid trying to sort this
out and have run out of ideas.
Firstly couldn't get install routine for SE software on disc to complete,
finally spotted info about removing Windows Hotfix Q328310 and finally got
it to install. Have paired phone with TDK PC card running 1.3.2.19, and can
create a serial connection on Comm 4.
Mobile Phone Monitor shows no phones
XTND Connect cannot connect to the phone
Tried IR but no luck either
Installed TDK Mobile 3.5. It can see the phone in its list but when I try to
connect to it either with Bluetooth or IR I get the error message
"error: Telefon Model-ID konnte nicht ermittelt werden" - I presume thats
what 'beta english' meant. Translates to Telephone model ID cannot be
determined.

I have a bootable clean version of the OS in a differnt partition, no sync
software for previous versions had ever been installed there. Tried all of
above there with same results.

Tried on another laptop - no different

Can anybody throw any light on this

My phone is
T610 with Vodafone customisations
03Week26
R1A081

In anticipation - Kissarmy

---

› See More: Can't Sync T610 - TDK Bluetooth - Windows XP SP1 - Outlook 2002

"Kiss Army" <[email protected]> schrieb im Newsbeitrag
news:[email protected]...
> I'm pulling my hair out. I have now spent 2 days solid trying to sort this
> out and have run out of ideas.
> Firstly couldn't get install routine for SE software on disc to complete,
> finally spotted info about removing Windows Hotfix Q328310 and finally got
> it to install. Have paired phone with TDK PC card running 1.3.2.19, and
can
> create a serial connection on Comm 4.
> Mobile Phone Monitor shows no phones
> XTND Connect cannot connect to the phone
> Tried IR but no luck either

did you enable com port 4 for sync? you need to do this at the windows
setting "phone monitor" set com 4 as "enabled"

"Oliver Bobon" <[email protected]> wrote in message
news:[email protected]...
>
> "Kiss Army" <[email protected]> schrieb im Newsbeitrag
> news:[email protected]...
> > I'm pulling my hair out. I have now spent 2 days solid trying to sort
this
> > out and have run out of ideas.
> > Firstly couldn't get install routine for SE software on disc to
complete,
> > finally spotted info about removing Windows Hotfix Q328310 and finally
got
> > it to install. Have paired phone with TDK PC card running 1.3.2.19, and
> can
> > create a serial connection on Comm 4.
> > Mobile Phone Monitor shows no phones
> > XTND Connect cannot connect to the phone
> > Tried IR but no luck either
>
> did you enable com port 4 for sync? you need to do this at the windows
> setting "phone monitor" set com 4 as "enabled"
>
>

Have a look in our Bluetooth Guides for some references on this.

--
Mauricio Freitas
mobility, wireless, handhelds: http://www.geekzone.co.nz

Thanks for replies,
I had set Com 4 as enabled and reserved in Phone Monitor. One of my problems
had been getting phone monitor to even see that I had a phone there at all,
fooled it with IR connection at same time.

Finally managed to get it to work this morning.
Opened My Bluetooth Places, right clicked on the icon for my paired T610.
Selected Properties, then the Authorize tab and ticked all the boxes. Then
as I had already been doing, initiated a serial connection to the phone and
ran XTNDConnect sync.
Very relieved.
I am now going to go and check out Mauricio's Bluetooth guide.
I have managed to set up a GPRS dial-up via IR but it doesn't work via
Bluetooth. Used SonyEricsson DUN Wizard.
Thanks for your time
Kissarmy

"Mauricio Freitas" <[email protected]> wrote in message
news:[email protected]...
>
> "Oliver Bobon" <[email protected]> wrote in message
> news:[email protected]...
> >
> > "Kiss Army" <[email protected]> schrieb im Newsbeitrag
> > news:[email protected]...
> > > I'm pulling my hair out. I have now spent 2 days solid trying to sort
> this
> > > out and have run out of ideas.
> > > Firstly couldn't get install routine for SE software on disc to
> complete,
> > > finally spotted info about removing Windows Hotfix Q328310 and finally
> got
> > > it to install. Have paired phone with TDK PC card running 1.3.2.19,
and
> > can
> > > create a serial connection on Comm 4.
> > > Mobile Phone Monitor shows no phones
> > > XTND Connect cannot connect to the phone
> > > Tried IR but no luck either
> >
> > did you enable com port 4 for sync? you need to do this at the windows
> > setting "phone monitor" set com 4 as "enabled"
> >
> >
>
> Have a look in our Bluetooth Guides for some references on this.
>
> --
> Mauricio Freitas
> mobility, wireless, handhelds: http://www.geekzone.co.nz
>
>

You need to go to control panel -> Phone Monitor Options and then select the
COM port for the Ericsson software to map to.

If you have the TDK BT then try just double clicking the synchronise
service. I have found this to be more reliable than the ericsson software.


"Kiss Army" <[email protected]> wrote in message
news:[email protected]...
> I'm pulling my hair out. I have now spent 2 days solid trying to sort this
> out and have run out of ideas.
> Firstly couldn't get install routine for SE software on disc to complete,
> finally spotted info about removing Windows Hotfix Q328310 and finally got
> it to install. Have paired phone with TDK PC card running 1.3.2.19, and
can
> create a serial connection on Comm 4.
> Mobile Phone Monitor shows no phones
> XTND Connect cannot connect to the phone
> Tried IR but no luck either
> Installed TDK Mobile 3.5. It can see the phone in its list but when I try
to
> connect to it either with Bluetooth or IR I get the error message
> "error: Telefon Model-ID konnte nicht ermittelt werden" - I presume thats
> what 'beta english' meant. Translates to Telephone model ID cannot be
> determined.
>
> I have a bootable clean version of the OS in a differnt partition, no sync
> software for previous versions had ever been installed there. Tried all of
> above there with same results.
>
> Tried on another laptop - no different
>
> Can anybody throw any light on this
>
> My phone is
> T610 with Vodafone customisations
> 03Week26
> R1A081
>
> In anticipation - Kissarmy
>
>

I don´t Know


--
RoSWiL
------------------------------------------------------------------------
Posted via MIDIBuddy - Professional MIDI Files and Music Community
http://midibuddy.net
View this thread: http://board.midibuddy.net/t64398.html

Ok, so I followed these suggestions as well as the BT guides on
geekzone. Got synching to work. Once! Now it won't do it anymore.

Any ideas?

I've noticed that the Serial connection will be re-established with last
device connected in that port. Have you connected to your T610, then to
another device (mobile, printer or whatever) and now is trying again the
T610?

If this is the case, you'll have to open Bluetooth Places, find the T610
icon, right-click and manually connect. When it connects ok, you can
right-click again and disconnect.

Then try syncing...

--
Mauricio Freitas
Handhelds, mobile: http://www.geekzone.co.nz or
http://www.bluetoothguide.com
Bluetooth guides: http://www.geekzone.co.nz/content.asp?contentid=449


"John" <[email protected]> wrote in message
news:[email protected]...
> Ok, so I followed these suggestions as well as the BT guides on
> geekzone. Got synching to work. Once! Now it won't do it anymore.
>
> Any ideas?

"Mauricio Freitas" <[email protected]> wrote in
news:[email protected]:

> I've noticed that the Serial connection will be re-established with last
> device connected in that port. Have you connected to your T610, then to
> another device (mobile, printer or whatever) and now is trying again the
> T610?
>
> If this is the case, you'll have to open Bluetooth Places, find the T610
> icon, right-click and manually connect. When it connects ok, you can
> right-click again and disconnect.
>
> Then try syncing...
>

This is the heart of my problem also. I have established the serial port
link and XtndConnect will work for me after a re-boot. This suggests the
serial link remains unless the T610 and my PC are unpaired. But if I then
update my Outlook contacts, don't unpair, and try to run XtndConnect again
-- then XtndConnect doesn't recognise the phone. Yet my T610 is still
active in My Bluetooth places and I can still copy files. And I cannot turn
bluetooth off in the T610 -- when I try the phone says Bluetooth is
``busy''. This suggests the bug is something to do with reinitialisation or
the protocol that ends a synchronization. Any ideas? Regards Chris
Griffith.

Hi,

On Wed, 30 Jul 2003 13:49:39 +0200, "Kiss Army"
<[email protected]> wrote:

>as I had already been doing, initiated a serial connection to the phone and
>ran XTNDConnect sync.
>Very relieved.

for me it always helped to run the SE MMS Home Editor, wait 'till it
shows my phone (T610 and T68i) as connected and then close the MMS
Studio and start syncing.

So it alweays worked for me.

The SE Phone Monitor is imho the worst programmed piece of software
ever besides MS Windows 2.0 :-)

HTH

Sushii



Sascha Büttner

--
For your safety: All outgoing mail is scanned for viruses by AVK and NAV.

www.sushii-net.de |MSN:[email protected] |AIM:buettnersascha|Y!:MC_Sushii
Es gibt nur 10 Arten Menschen, jene, die binär verstehen und alle Anderen.