Announce caller voice - T610

I thought my attached voice names to callers was much louder
when I 1st had the phone.. almost like a ring tone volume.. (the phone would
ring and announce someone if I had a voice ID attached to the callers name -
and I would hear "THE NAME" fairly loud). Now, I heard it through my ear
piece loud but not the speaker.

Does someone out there have the T610 set up with voice ID's, and can they
tell me if it's somewhat loud when the phone rings - not through the
headset. Maybe I have a setting wrong in my phone, OR I was mistaken in the
beginning.

Thanks

sc

---

› See More: Announce caller voice - T610

"Scott C" <[email protected]> wrote in message
news:[email protected]...
> I thought my attached voice names to callers was much louder
> when I 1st had the phone.. almost like a ring tone volume.. (the phone
would
> ring and announce someone if I had a voice ID attached to the callers
name -
> and I would hear "THE NAME" fairly loud). Now, I heard it through my ear
> piece loud but not the speaker.
>
> Does someone out there have the T610 set up with voice ID's, and can they
> tell me if it's somewhat loud when the phone rings - not through the
> headset. Maybe I have a setting wrong in my phone, OR I was mistaken in
the
> beginning.
>
> Thanks
>
> sc
>

I have mine set up with voice IDs but they are very quiet and it's difficult
to hear which name is being announced unless you're very close to the phone
when it rings

Thanks, this is what mine does.. works well with the headset, but not
without.
sc
"Alan B" <[email protected]> wrote in message
news:[email protected]...
>
> "Scott C" <[email protected]> wrote in message
> news:[email protected]...
> > I thought my attached voice names to callers was much louder
> > when I 1st had the phone.. almost like a ring tone volume.. (the phone
> would
> > ring and announce someone if I had a voice ID attached to the callers
> name -
> > and I would hear "THE NAME" fairly loud). Now, I heard it through my ear
> > piece loud but not the speaker.
> >
> > Does someone out there have the T610 set up with voice ID's, and can
they
> > tell me if it's somewhat loud when the phone rings - not through the
> > headset. Maybe I have a setting wrong in my phone, OR I was mistaken in
> the
> > beginning.
> >
> > Thanks
> >
> > sc
> >
>
> I have mine set up with voice IDs but they are very quiet and it's
difficult
> to hear which name is being announced unless you're very close to the
phone
> when it rings
>
>

"Scott C" <[email protected]> schrieb im Newsbeitrag
news:[email protected]...
> Thanks, this is what mine does.. works well with the headset, but not
> without.
> sc
> "Alan B" <[email protected]> wrote in message
> news:[email protected]...
> >
> > "Scott C" <[email protected]> wrote in message
> > news:[email protected]...
> > > I thought my attached voice names to callers was much louder
> > > when I 1st had the phone.. almost like a ring tone volume.. (the phone
> > would
> > > ring and announce someone if I had a voice ID attached to the callers
> > name -
> > > and I would hear "THE NAME" fairly loud). Now, I heard it through my
ear
> > > piece loud but not the speaker.
> > >
> > > Does someone out there have the T610 set up with voice ID's, and can
> they
> > > tell me if it's somewhat loud when the phone rings - not through the
> > > headset. Maybe I have a setting wrong in my phone, OR I was mistaken
in
> > the
> > > beginning.
> > >
> > > Thanks
> > >
> > > sc
> > >
> >
> > I have mine set up with voice IDs but they are very quiet and it's
> difficult
> > to hear which name is being announced unless you're very close to the
> phone
> > when it rings
> >
> >
>
>

Do you have a headset with cable?
With my Bluetooth-Headset (HBH-60), I don't hear the name on the headset,
but quietly in my pocket :-((

I tried different things, but the BT-headset just "rings" in it's own stupid
way, when someone calls...

Gottfried

I do use the headset with cable - I like the button on the headset to make
calls and end calls (similar to the BT200 headset I had)... but when I tried
the BT200 headset, it worked fine, but would not connect quick enough when
the phone rang so I could hear the name - not a large issue with me, just an
observation - as you do hear the name, I suspect your headset is not
connecting fast enough either.

sc

"Gottfried Mayer" <[email protected]> wrote in message
news:[email protected]...
> "Scott C" <[email protected]> schrieb im Newsbeitrag
> news:[email protected]...
> > Thanks, this is what mine does.. works well with the headset, but not
> > without.
> > sc
> > "Alan B" <[email protected]> wrote in message
> > news:[email protected]...
> > >
> > > "Scott C" <[email protected]> wrote in message
> > > news:[email protected]...
> > > > I thought my attached voice names to callers was much louder
> > > > when I 1st had the phone.. almost like a ring tone volume.. (the
phone
> > > would
> > > > ring and announce someone if I had a voice ID attached to the
callers
> > > name -
> > > > and I would hear "THE NAME" fairly loud). Now, I heard it through my
> ear
> > > > piece loud but not the speaker.
> > > >
> > > > Does someone out there have the T610 set up with voice ID's, and can
> > they
> > > > tell me if it's somewhat loud when the phone rings - not through the
> > > > headset. Maybe I have a setting wrong in my phone, OR I was mistaken
> in
> > > the
> > > > beginning.
> > > >
> > > > Thanks
> > > >
> > > > sc
> > > >
> > >
> > > I have mine set up with voice IDs but they are very quiet and it's
> > difficult
> > > to hear which name is being announced unless you're very close to the
> > phone
> > > when it rings
> > >
> > >
> >
> >
>
> Do you have a headset with cable?
> With my Bluetooth-Headset (HBH-60), I don't hear the name on the headset,
> but quietly in my pocket :-((
>
> I tried different things, but the BT-headset just "rings" in it's own
stupid
> way, when someone calls...
>
> Gottfried
>
>

"Scott C" <[email protected]> schrieb im Newsbeitrag
news:[email protected]...

<corrected top-post, see below>

> "Gottfried Mayer" <[email protected]> wrote in message
> news:[email protected]...
> > "Scott C" <[email protected]> schrieb im Newsbeitrag
> > news:[email protected]...
> > > Thanks, this is what mine does.. works well with the headset, but not
> > > without.
> > > sc
> > > "Alan B" <[email protected]> wrote in message
> > > news:[email protected]...
> > > >
> > > > "Scott C" <[email protected]> wrote in message
> > > > news:[email protected]...
> > > > > I thought my attached voice names to callers was much louder
> > > > > when I 1st had the phone.. almost like a ring tone volume.. (the
> phone
> > > > would
> > > > > ring and announce someone if I had a voice ID attached to the
> callers
> > > > name -
> > > > > and I would hear "THE NAME" fairly loud). Now, I heard it through
my
> > ear
> > > > > piece loud but not the speaker.
> > > > >
> > > > > Does someone out there have the T610 set up with voice ID's, and
can
> > > they
> > > > > tell me if it's somewhat loud when the phone rings - not through
the
> > > > > headset. Maybe I have a setting wrong in my phone, OR I was
mistaken
> > in
> > > > the
> > > > > beginning.
> > > > >
> > > > > Thanks
> > > > >
> > > > > sc
> > > > >
> > > >
> > > > I have mine set up with voice IDs but they are very quiet and it's
> > > difficult
> > > > to hear which name is being announced unless you're very close to
the
> > > phone
> > > > when it rings
> > > >
> > > >
> > >
> > >
> >
> > Do you have a headset with cable?
> > With my Bluetooth-Headset (HBH-60), I don't hear the name on the
headset,
> > but quietly in my pocket :-((
> >
> > I tried different things, but the BT-headset just "rings" in it's own
> stupid
> > way, when someone calls...
> >
> > Gottfried
> >
> >
> I do use the headset with cable - I like the button on the headset to make
> calls and end calls (similar to the BT200 headset I had)... but when I
tried
> the BT200 headset, it worked fine, but would not connect quick enough when
> the phone rang so I could hear the name - not a large issue with me, just
an
> observation - as you do hear the name, I suspect your headset is not
> connecting fast enough either.
>
> sc

Hi sc,

It's not an issue about the connecting time, I hear the name of the caller
out of the T610's speaker (not very loud, though) and the Bluetooth Headset
just does a ringing noise (as always). It seems to me as if the bluetooth
headset can't do anything else than this ringing tone when a call comes in
:-(

If the bluetooth connection is made very very fast, the headset would still
just "ring" on its own and the T610 would do the proper ringtone (midi) and
the caller name.


Anyway: happy holydays
Gottfried

This is different that what I thought as my BT headset did not answer quick
enough for me to think the callers name would come through..

sc

"Gottfried Mayer" <[email protected]> wrote in message
news:[email protected]...
> "Scott C" <[email protected]> schrieb im Newsbeitrag
> news:[email protected]...
>
> <corrected top-post, see below>
>
> > "Gottfried Mayer" <[email protected]> wrote in message
> > news:[email protected]...
> > > "Scott C" <[email protected]> schrieb im Newsbeitrag
> > > news:[email protected]...
> > > > Thanks, this is what mine does.. works well with the headset, but
not
> > > > without.
> > > > sc
> > > > "Alan B" <[email protected]> wrote in message
> > > > news:[email protected]...
> > > > >
> > > > > "Scott C" <[email protected]> wrote in message
> > > > > news:[email protected]...
> > > > > > I thought my attached voice names to callers was much louder
> > > > > > when I 1st had the phone.. almost like a ring tone volume.. (the
> > phone
> > > > > would
> > > > > > ring and announce someone if I had a voice ID attached to the
> > callers
> > > > > name -
> > > > > > and I would hear "THE NAME" fairly loud). Now, I heard it
through
> my
> > > ear
> > > > > > piece loud but not the speaker.
> > > > > >
> > > > > > Does someone out there have the T610 set up with voice ID's, and
> can
> > > > they
> > > > > > tell me if it's somewhat loud when the phone rings - not through
> the
> > > > > > headset. Maybe I have a setting wrong in my phone, OR I was
> mistaken
> > > in
> > > > > the
> > > > > > beginning.
> > > > > >
> > > > > > Thanks
> > > > > >
> > > > > > sc
> > > > > >
> > > > >
> > > > > I have mine set up with voice IDs but they are very quiet and it's
> > > > difficult
> > > > > to hear which name is being announced unless you're very close to
> the
> > > > phone
> > > > > when it rings
> > > > >
> > > > >
> > > >
> > > >
> > >
> > > Do you have a headset with cable?
> > > With my Bluetooth-Headset (HBH-60), I don't hear the name on the
> headset,
> > > but quietly in my pocket :-((
> > >
> > > I tried different things, but the BT-headset just "rings" in it's own
> > stupid
> > > way, when someone calls...
> > >
> > > Gottfried
> > >
> > >
> > I do use the headset with cable - I like the button on the headset to
make
> > calls and end calls (similar to the BT200 headset I had)... but when I
> tried
> > the BT200 headset, it worked fine, but would not connect quick enough
when
> > the phone rang so I could hear the name - not a large issue with me,
just
> an
> > observation - as you do hear the name, I suspect your headset is not
> > connecting fast enough either.
> >
> > sc
>
> Hi sc,
>
> It's not an issue about the connecting time, I hear the name of the caller
> out of the T610's speaker (not very loud, though) and the Bluetooth
Headset
> just does a ringing noise (as always). It seems to me as if the bluetooth
> headset can't do anything else than this ringing tone when a call comes in
> :-(
>
> If the bluetooth connection is made very very fast, the headset would
still
> just "ring" on its own and the T610 would do the proper ringtone (midi)
and
> the caller name.
>
>
> Anyway: happy holydays
> Gottfried
>
>