SYSTEM STATUS??

Does anyone know how to read the information displayed in "trace mode"?
I know some of the information is the site ID and signal strength, but
the rest is unknown. Any help is appreciated.

Information format:

System Status
30.75 3E9-8
00db -83 0
+28 +0 0

Thanks,

Terry

---

› See More: SYSTEM STATUS??

See below

"Terry" <[email protected]> wrote in message
news:[email protected]...
> Does anyone know how to read the information displayed in "trace mode"?
> I know some of the information is the site ID and signal strength, but
> the rest is unknown. Any help is appreciated.
>
> Information format:
>
> System Status
> 30.75 (SQE) 3E9-8 (Color code)
> 00db -83 0 (RSSI)
> +28 +0 0
>
> Thanks,
>
> Terry
>

See below

"Terry" <[email protected]> wrote in message
news:[email protected]...
> Does anyone know how to read the information displayed in "trace mode"?
> I know some of the information is the site ID and signal strength, but
> the rest is unknown. Any help is appreciated.
>
> Information format:
>
> System Status
> 30.75 (SQE) 3E9-8 (Color code)
> 00db -83 0 (RSSI)
> +28 +0 0
>
> Thanks,
>
> Terry
>

the first # ( 30.75 ) is your sqe ( signal quality estimator )

the 3E9-8 changes between to different things, the first few times it
flashes it is giving you the code of the tower you are serving off of.

The first # on the second line is your uplink status, usually never better
than -26db unless your standing on the top of the tower. 00db being the
smallest signal.

the second # on the second line is the downlink status, usually never better
than -55 , and 110 and above is worthless

the + 28 is the internal operating temperature of the phone in celcius . the
+0 is the amount of change the temp has made in the last 2 seconds.

i have no idea what the last number is, its always been 0 ever time i check.
if you really want to know i can look it up.


"Terry" <[email protected]> wrote in message
news:[email protected]...
> Does anyone know how to read the information displayed in "trace mode"?
> I know some of the information is the site ID and signal strength, but
> the rest is unknown. Any help is appreciated.
>
> Information format:
>
> System Status
> 30.75 3E9-8
> 00db -83 0
> +28 +0 0
>
> Thanks,
>
> Terry
>

the first # ( 30.75 ) is your sqe ( signal quality estimator )

the 3E9-8 changes between to different things, the first few times it
flashes it is giving you the code of the tower you are serving off of.

The first # on the second line is your uplink status, usually never better
than -26db unless your standing on the top of the tower. 00db being the
smallest signal.

the second # on the second line is the downlink status, usually never better
than -55 , and 110 and above is worthless

the + 28 is the internal operating temperature of the phone in celcius . the
+0 is the amount of change the temp has made in the last 2 seconds.

i have no idea what the last number is, its always been 0 ever time i check.
if you really want to know i can look it up.


"Terry" <[email protected]> wrote in message
news:[email protected]...
> Does anyone know how to read the information displayed in "trace mode"?
> I know some of the information is the site ID and signal strength, but
> the rest is unknown. Any help is appreciated.
>
> Information format:
>
> System Status
> 30.75 3E9-8
> 00db -83 0
> +28 +0 0
>
> Thanks,
>
> Terry
>

Thanks for the info!



Consilium Morpheus Moto wrote:
> the first # ( 30.75 ) is your sqe ( signal quality estimator )
>
> the 3E9-8 changes between to different things, the first few times it
> flashes it is giving you the code of the tower you are serving off of.
>
> The first # on the second line is your uplink status, usually never better
> than -26db unless your standing on the top of the tower. 00db being the
> smallest signal.
>
> the second # on the second line is the downlink status, usually never better
> than -55 , and 110 and above is worthless
>
> the + 28 is the internal operating temperature of the phone in celcius . the
> +0 is the amount of change the temp has made in the last 2 seconds.
>
> i have no idea what the last number is, its always been 0 ever time i check.
> if you really want to know i can look it up.
>
>
> "Terry" <[email protected]> wrote in message
> news:[email protected]...
>
>>Does anyone know how to read the information displayed in "trace mode"?
>>I know some of the information is the site ID and signal strength, but
>>the rest is unknown. Any help is appreciated.
>>
>>Information format:
>>
>>System Status
>>30.75 3E9-8
>>00db -83 0
>>+28 +0 0
>>
>>Thanks,
>>
>>Terry
>>
>
>
>

Thanks for the info!



Consilium Morpheus Moto wrote:
> the first # ( 30.75 ) is your sqe ( signal quality estimator )
>
> the 3E9-8 changes between to different things, the first few times it
> flashes it is giving you the code of the tower you are serving off of.
>
> The first # on the second line is your uplink status, usually never better
> than -26db unless your standing on the top of the tower. 00db being the
> smallest signal.
>
> the second # on the second line is the downlink status, usually never better
> than -55 , and 110 and above is worthless
>
> the + 28 is the internal operating temperature of the phone in celcius . the
> +0 is the amount of change the temp has made in the last 2 seconds.
>
> i have no idea what the last number is, its always been 0 ever time i check.
> if you really want to know i can look it up.
>
>
> "Terry" <[email protected]> wrote in message
> news:[email protected]...
>
>>Does anyone know how to read the information displayed in "trace mode"?
>>I know some of the information is the site ID and signal strength, but
>>the rest is unknown. Any help is appreciated.
>>
>>Information format:
>>
>>System Status
>>30.75 3E9-8
>>00db -83 0
>>+28 +0 0
>>
>>Thanks,
>>
>>Terry
>>
>
>
>