nokia 6100 questions2

Hello,

I asked some questions a while ago(thanks to everybody who answered). Some
wasn't answered, so I'll try again:


1) Is there a way to change the color of the font in the standby screen? If
I put a dark image, the black test cannot be seen.

2) Is there a way to put a full screen caller group logo? If not, what is
the maximum size in pixels?

3) Is there a way to put a special "recieved SMS" tone for someone in the
phone book or for a caller group?

That's it.

Thank you very much in advance,

Tal

---

› See More: nokia 6100 questions2

Tal Lavi wrote:

> I asked some questions a while ago(thanks to everybody who answered). Some
> wasn't answered, so I'll try again:

I only know the answer to one of them ;-)

> 1) Is there a way to change the color of the font in the standby screen?
If
> I put a dark image, the black test cannot be seen.

Afraid not.

Hi,

In display settings/colour schemes, you can change the colour of your font
to blue, pink, turquoise, green, gray, orange, red, or violet. As far as I
am aware, you cant change the group logo. You can set caller group tones but
only for ringing, not SMS.

HTH,

C.

ooh how do you assign different tones for different people in your phone
book?

And also... where abouts is the IR? I can't see it anywhere!


--
Kirky
------------------------------------------------------------------------
Posted via MIDIBuddy - Professional MIDI Files and Music Community
http://midibuddy.net
View this thread: http://board.midibuddy.net/t71292.html

Kirky wrote:

> And also... where abouts is the IR? I can't see it anywhere!

Menu > Connectivity

> In display settings/colour schemes, you can change the colour of your font
> to blue, pink, turquoise, green, gray, orange, red, or violet.

Yes, but only the colors of the network coverage and battery status bars are
changed in idle mode, NOT the font color!
I haven't found a way to change that :-(

cheers,
Norbert

No I meant, where actaully on the phone is it?! As in... the outside of
the phone, can't see it


--
Kirky
------------------------------------------------------------------------
Posted via MIDIBuddy - Professional MIDI Files and Music Community
http://midibuddy.net
View this thread: http://board.midibuddy.net/t71292.html

Kirky wrote:

> No I meant, where actaully on the phone is it?! As in... the outside of
> the phone, can't see it

On the right-hand side I believe (I can't check as my 6100 is at the Service
Centre for repair). It's the opposite side to the volume controls.

On the opposite side from the volume buttons.

C.

I don't think mine works then <sobs>


--
Kirky
------------------------------------------------------------------------
Posted via MIDIBuddy - Professional MIDI Files and Music Community
http://midibuddy.net
View this thread: http://board.midibuddy.net/t71292.html

On Tue, 2 Sep 2003 13:23:10 -0400, Kirky <[email protected]> wrote:

>
>I don't think mine works then <sobs>

Why? What have you tried to do with it?


If you want to test your IR port, you need another IR device to communicate with
it. One which you know is working.
The easiest way would be to use another compatible phone and just send a
business card via IR.

Alternatively, you can do a simple confidence test by looking at the IR port
whilst it's transmitting.
Infra Red is invisible to the human eye, so unless you're a superhero like a
powerpuff girl or something, you won't see it. However, if you have a video
camera or a digital camera (preferably with LCD viewfinder) you can use this to
look at the light.

Point the camera at the IR port, and try to send a business card. The phone will
attempt to communicate a few times before giving up.

It's no good just enabling IR, as the phone waits for a signal before
communicating anything. You need to make it initiate the communication.

You should be able to see the light flashing, like this:
http://www.cginternet.net/6100




Chris Pollard

--
CG Internet café, Tagum City, Philippines
http://www.cginternet.net