- 03-15-2005, 04:46 PM #1Newbie
- Posts
- 2
I dropped my 160c phone in to the toilet Sunday, it was in about 10 secs. I let it dry out, and it actually worked yesterday morning for an hour or 2, and then it started ringing by itself, so I took the battery out.
Now I can't get the keypad to work at all. I have taken the phone apart and it looks normal, no corrosion that I can see. I can't enter my sim code, but it can power up, no problem. I can put in another sim card that doesn't need a code, and call the phone, it receives the call, but cannot press the button to activate the call.
I have read that the techs clean the contacts with a brush and alcohol, I have done this with a pencil eraser. If I scrub lightly with alcohol, what would I brush since it's only the keypad??
Any help would be appreciated, as I am using my old i50sx for the meantime.
Thank you,
Allan
› See More: i60c minor water damage, keypad won't work
- 03-15-2005, 05:30 PM #2
Try this, get sand paper and just pass the sand paper about 5 times lightly do not over do it.
- 03-15-2005, 06:37 PM #3Newbie
- Posts
- 2
that would work, but I used the tip of a pointed tweezer, and scraped. They were clean anyway. Does anyone know where the connection for the keypad is?
- 03-18-2005, 10:56 PM #4Junior Member
- Posts
- 13 - liked 1 times
if you dont get the keypad to work and you end up needing a new keypad board let me know i havea few laying around..
Phones Discussed Above
More Motorola I60C topics | Motorola Forum | Reviews |
Similar Threads
- ATT
- LG Dare
- Samsung
- alt.cellular.nokia
- alt.cellular.cingular
Auto para negocios
in Chit Chat