Enabling Wi-Fi and Connecting to a Network:

  1. Using two fingers, swipe the status bar down to open the "Quick Settings" panel
  2. Tap the "Wi-Fi" tile to enable Wi-Fi
  3. Press the "" button associated with the tile
  4. In the list of detected Wi-Fi networks, select the one that you wish to connect to. (You can also tap "Menu" > "Add network" to manually add a Wi-Fi network)
  5. If prompted to do so, enter the network's password or key
  6. Tap "Connect"

Connecting to a Different Wi-Fi Network:

  1. Swipe the status bar down using two fingers
  2. Make sure that Wi-Fi is enabled, and tap the "" button
  3. To manually scan for networks tap "Menu" > "Scan"
  4. Select the desired network and tap "Connect"

Connecting to a Wi-Fi Network via WPS:

Assuming that you're using a Wi-Fi router featuring Wi-Fi Protected Setup (or WPS), you can easily connect your One max by performing the following steps:

  1. Open the "Quick Settings" window by swiping the status bar down with two fingers
  2. Enable Wi-Fi if necessary, then tap the "" button
  3. Tap "Menu" > "WPS Push"
  4. Press the WPS button on your Wi-Fi router

NOTE: to use the WPS PIN method, press the "Menu" icon and tap "WPS PIN Entry"

Disconnecting from a Wireless Network:

  1. Swipe down from the status bar using two fingers
  2. Make sure that Wi-Fi is enabled, and tap ""
  3. Here, you can:
    • Tap the wireless network that your device is connected to, and then tap "Disconnect"
    • If you wish to disconnect and also remove the settings for the respective network tap and hold its name, then tap "Forget network"

Prevent Getting Notifications From Unsecured Wi-Fi Networks:

  1. Access the "Quick Settings" menu
  2. Enable Wi-Fi and tap the "" button associated with the Wi-Fi tile
  3. Tap and hold the unsecured Wi-Fi network from which you wish to stop the notifications
  4. Tap "Block network notification"
  5. To unblock a network, tap and hold its name, then tap "Unblock network notification"

Logging into a Public Wi-Fi Network Automatically (WISPr):

You can set your HTC One max to automatically log into public Wi-Fi networks that you use on a regular basis. To do so, you need to add your login credentials to the WISPr (Wireless Internet Service Provider roaming) settings.

  1. Using two fingers, drag the status bar down
  2. If necessary, tap the "Wi-Fi" tile to enable Wi-Fi
  3. Press the "" button
  4. Tap the "Menu" icon and tap "Advanced"
  5. Under "WISPr settings", select "Auto login"
  6. Tap "WISPr account settings" > "Add a new account"
  7. Enter your login name, password and service provider name
  8. Tap "Menu" > "Save"
  9. Enable Wi-Fi and connect to a public Wi-Fi network

NOTE: You can add up to five sets of login credentials to the WISPr accounts list

Wi-Fi Printing

In order to use Wi-Fi Printing, your HTC One max needs to be connected to the same local network as the supported Wi-Fi printer.

  1. While in an app such as "Calendar" or "Mail", open the item that you wish to print
  2. Tap the "Menu" icon and tap "Print". (Or "More" > "Print")
  3. On the "Print" screen, select the printer that you wish to use
  4. If necessary, set the desired page range. Additionally, you can tap "Advanced" to set the page size, layout, page orientation and more
  5. Tap "Print"

Printing a Photo:

  1. Open the "Gallery" application and open the photo that you wish to print
  2. Tap the photo and tap "Menu" > "Print"
  3. Select the desired printer and tap "Print"

Adding a Printer Manually:

If your printer does not appear in the list, you can try and add it manually by doing the following:

  1. From the "Print" screen, tap "Add printer"
  2. Enter your printer's IP address and select a port.
  3. Tap "Next" and select the manufacturer and the model of the printer
  4. Tap "Save"

See More: HTC One max: Enable and Manage Wi-Fi and Using Wi-Fi Printing