Results 1 to 2 of 2
- 12-03-2005, 08:57 PM #1John NavasGuest
[POSTED TO alt.cellular.cingular - REPLY ON USENET PLEASE]
In <[email protected]> on Tue, 29 Nov 2005 18:47:40
GMT, subdude <[email protected]> wrote:
>John-
>
>Have read your posts here and visited your site so I figured youmioght
>be the guy to ask. (Nice site BTW, I spent a lot of time learning
>there!)
Thanks.
>I recently was given an HP iPaq 1940 by a friend who never opened the
>box. Knowing that it had bluetooth I had hoped to pair it with my
>MPX220 so as to surf the net through the (yes I know, SLOW) bt
>connection.
Bluetooth is FAST compared to cellular wireless.
>I have managed to pair the phone and iPaq fine, but I cannot find ANY
>info on how to set up either the phone or the iPaq to dial out that I
>could understand.
>
>I set up a connection to the phone to dial the number "*99***3#" based
>on a post I read over at geekzone
>(http://www.geekzone.co.nz/forums.asp...6&TopicId=1124) and
>while the modem seems to establish a connection to the phone it never
>completes it.
>
>The info in the GeekZone forums post mentions the following settings:
>
>User name: [email protected]
>Password: ZXY203DC9K0402
>the dialing number for your Ipaq should be *99***3#
That's obsolete, and applies only to Data Connect, not MEdia Net.
>Do you have ideas on what needs to be done or can you point me in the
>right direction?
Data Connect or MEdia Net? If the latter:
<http://en.wikibooks.org/wiki/Cingular_Wireless_MEdia_Configuration>
--
Best regards, FAQ FOR CINGULAR WIRELESS
John Navas <http://en.wikibooks.org/wiki/Cingular_Wireless_FAQ>
› See More: PING: John Navas re: iPaq and MPX220 bt dialup modem...How To?
- 12-05-2005, 09:35 AM #2John NavasGuest
Re: PING: John Navas re: iPaq and MPX220 bt dialup modem...How To?
[POSTED TO alt.cellular.cingular - REPLY ON USENET PLEASE]
In <[email protected]> on Sun, 04 Dec 2005 19:12:24
GMT, subdude <[email protected]> wrote:
>>>Do you have ideas on what needs to be done or can you point me in the
>>>right direction?
>>
>>Data Connect or MEdia Net? If the latter:
>><http://en.wikibooks.org/wiki/Cingular_Wireless_MEdia_Configuration>
>
>When I look at the Data Connections in Settings on my MPX 220, both
>the Internet Connection and WAP Connections are marked "PDA Connect".
>
>I looked at the wikipedia page you referenced, but none of it seemed
>to relate to connecting my iPaq 1940 to my MPX220 Smartphone for a
>bluetooth GPRS connection.
>
>I appreciate your efforts; any other ideas?
If you're on MEdia Net, that page does apply -- the settings and basic methods
are the same for MEdia Net on different devices, albeit entered into the
device differently.
If, however, you're on a Data Connect package, see my webpage at
<http://navasgrp.home.att.net/tech/cingular/p800_setup.htm>. Those are the
old settings, but they should still work.
--
Best regards, FAQ FOR CINGULAR WIRELESS
John Navas <http://en.wikibooks.org/wiki/Cingular_Wireless_FAQ>
Phones Discussed Above
More Motorola MPX220 topics | Motorola Forum | Reviews | ||
More HP iPAQ hw6510 / hw6515 topics | HP (Palm) Forum | Reviews |
Similar Threads
- alt.cellular.cingular
- alt.cellular.cingular
Six weeks after starting the course, so much more relaxed!
in Chit Chat