How to change cover on t637

I'd like to replace the housing on my t637 as mine is getting a bit beat up.
I've ordered a new OEM full cover, but I've been unable to find clear
instructions on how to actually swap the housings. Removing the antenna
cover seems especially murky. I do have a T6 driver, but beyond that, I'd
welcome any tips and pointers you folks can give me.
-- Cary

---

› See More: How to change cover on t637

You have to slide the antenna cover UP
you have to press very hard down and up
you can also try to put a small flat tip on the left of the Camera

below is a link for the 616 I used the information and it worked on my 637
the antenna cover is very tuff I thought I was going to break it then it pop
up

try to avoid any dust than can get betwen the screen and the housing glass

http://www.howardforums.com/showthre...t=t616+housing"Cary" <[email protected]> wrote in messagenews:[email protected]...> I'd like to replace the housing on my t637 as mine is getting a bit beatup. I've ord
ered a new OEM full cover, but I've been unable to find clearinstructions on how to actually swap the housings. Removing the antennacover seems especially murky. I do have a T6 driver, but beyond that, I'dwelcome any tips and pointers you folks can give
me.> -- Cary>

Thanks, EL. The illustrations are excellent and your advice will be
helpful.
--Cary.

"EL" <[email protected]> wrote in message
news:[email protected]...
> You have to slide the antenna cover UP
> you have to press very hard down and up
> you can also try to put a small flat tip on the left of the Camera
>
> below is a link for the 616 I used the information and it worked on my 637
> the antenna cover is very tuff I thought I was going to break it then it
> pop up
>
> try to avoid any dust than can get betwen the screen and the housing glass
>
> http://www.howardforums.com/showthre...t=t616+housing"Cary"
> <[email protected]> wrote in
> messagenews:[email protected]...> I'd like to replace the
> housing on my t637 as mine is getting a bit beatup. I've ordered a new OEM
> full cover, but I've been unable to find clearinstructions on how to
> actually swap the housings. Removing the antennacover seems especially
> murky. I do have a T6 driver, but beyond that, I'dwelcome any tips and
> pointers you folks can give me.> -- Cary>
>