Results 1 to 6 of 6
  1. #1
    Christina
    Guest
    I have a Ericsson 230 DECT phone. My problem is that i have lost the
    pin/AC for the base station and I know i changed it from its original
    value. Does anybody know how to reset the base to its original pin.

    thanks



    See More: Ericsson 230 DECT




  2. #2
    Jeremy Pope
    Guest

    Re: Ericsson 230 DECT

    "Christina" <[email protected]> wrote in message
    news:[email protected]...
    > I have a Ericsson 230 DECT phone. My problem is that i have lost the
    > pin/AC for the base station and I know i changed it from its original
    > value. Does anybody know how to reset the base to its original pin.
    >
    > thanks


    I have a pdf manual for the 260 which is the 230 + answerphone. It states:

    "If you enter an incorrect base station PIN code three times in a row, the
    PIN code is invalidated. Although you can still make and receive calls, you
    cannot alter the base station settings. Whenever you make an attempt to
    change a setting, you are asked to enter the PARI code. After entering the
    correct PARI code, the base station PIN code is reset to the default code."

    The PARI code is 12 digits and should be on a sticker on the back of the
    base station. The default code is 1111.

    I can mail the manual to you if you wish, its 1.5Mb.

    Jeremy Pope.





  3. #3
    Christina
    Guest

    Re: Ericsson 230 DECT

    Hi jeremy.. i forget to write that my problem is that i my handset is
    no longer subscribed to the base and therefore i don't have any
    control over the base before i know the correct pin and AC of the
    base, and it doesn't just ask for the pari code after 3 attemts.

    thanks anyway



  4. #4
    Jeremy Pope
    Guest

    Re: Ericsson 230 DECT

    "Christina" <[email protected]> wrote in message
    news:[email protected]...
    > Hi jeremy.. i forget to write that my problem is that i my handset is
    > no longer subscribed to the base and therefore i don't have any
    > control over the base before i know the correct pin and AC of the
    > base, and it doesn't just ask for the pari code after 3 attemts.
    >
    > thanks anyway


    That would make it harder......

    Sounds like a phone call to Ericsson, http://www.ericsson.com/contact.shtml,
    and a lot of luck.

    Good luck.

    Jeremy.





  5. #5
    Christina
    Guest

    Re: Ericsson 230 DECT

    got the rigt solution now. you have to press 1111 when the phone ask
    for Ac and then hold down the button on the base and the press YES on
    the phone(still holding the botton on the base). this will solve the
    problem even if the base code was changed from the original, which is
    1111



  6. #6
    Christina
    Guest

    Re: Ericsson 230 DECT

    got the rigt solution now. you have to press 1111 when the phone ask
    for Ac and then hold down the button on the base and the press YES on
    the phone(still holding the botton on the base). this will solve the
    problem even if the base code was changed from the original, which is
    1111



  • Similar Threads