Results 1 to 4 of 4
- 11-29-2003, 03:25 AM #1Enforcement TeamGuest
It keeps saying bonding failed. It reconises the device but it just keeps
failing any ideas?.
TIA
› See More: HBH-15 headset- P800
- 12-01-2003, 12:34 AM #2gopiGuest
Re: HBH-15 headset- P800
"Enforcement Team" <[email protected]> wrote in message news:<[email protected]>...
> It keeps saying bonding failed. It reconises the device but it just keeps
> failing any ideas?.
I have a P800 and have bonded it with two different HBH-15 headsets a
few times without problems. Are you sure that you remember the
passcode number for it?
If you've forgotten the code, or just want to reset the headset just
in case, I believe the procedure is:
Turn the headset off. Then, press and hold the power switch in, Keep
holding it even after it flashes red/green to indicate it's
discoverable. I believe you hold it for 10 seconds after that or so.
Then it'll reset itself, with the default code of "0000".
- 12-05-2003, 01:30 PM #3Tight Guard SecurityGuest
Re: HBH-15 headset- P800
"gopi" <[email protected]> wrote in message
news:[email protected]...
> "Enforcement Team" <[email protected]> wrote in message
news:<[email protected]>...
> > It keeps saying bonding failed. It reconises the device but it just
keeps
> > failing any ideas?.
>
> I have a P800 and have bonded it with two different HBH-15 headsets a
> few times without problems. Are you sure that you remember the
> passcode number for it?
>
> If you've forgotten the code, or just want to reset the headset just
> in case, I believe the procedure is:
> Turn the headset off. Then, press and hold the power switch in, Keep
> holding it even after it flashes red/green to indicate it's
> discoverable. I believe you hold it for 10 seconds after that or so.
> Then it'll reset itself, with the default code of "0000".
Yea i got the code ok as it works perfect with my T68i with no problem
- 12-06-2003, 03:58 AM #4Tight Guard SecurityGuest
Re: HBH-15 headset- P800
"Tight Guard Security" <[email protected]> wrote in message
news:[email protected]...
>
> "gopi" <[email protected]> wrote in message
> news:[email protected]...
> > "Enforcement Team" <[email protected]> wrote in message
> news:<[email protected]>...
> > > It keeps saying bonding failed. It reconises the device but it just
> keeps
> > > failing any ideas?.
> >
> > I have a P800 and have bonded it with two different HBH-15 headsets a
> > few times without problems. Are you sure that you remember the
> > passcode number for it?
> >
> > If you've forgotten the code, or just want to reset the headset just
> > in case, I believe the procedure is:
> > Turn the headset off. Then, press and hold the power switch in, Keep
> > holding it even after it flashes red/green to indicate it's
> > discoverable. I believe you hold it for 10 seconds after that or so.
> > Then it'll reset itself, with the default code of "0000".
>
> Yea i got the code ok as it works perfect with my T68i with no problem
Make sure you place 0000 and not oooo as its easy if your writing with the
pen as it recognises o instead of 0 this giving you a wrong password HTH.
Phones Discussed Above
More Sony Ericsson P800 topics | Sony Ericsson Forum | Reviews |
Similar Threads
- Sony Ericsson
- Nokia
- alt.cellular.ericsson
- alt.cellular.ericsson
What are the best ways to retain employees of your company?
in Chit Chat