Results 1 to 1 of 1
- 04-27-2004, 03:47 PM #1ocularGuest
Have two Smarteq Handsfree Sets, they work well with my
Nokia 6210 Mobile phones.
Have upgraded to a Nokia 6310i but notice the radio mute
doesn't work properly.
What happens is the mute function cuts in correctly (the
radio output switches off) but stays off for a variable
time from up to 10 secs, but at other times the mute may
function for 30 secs, and other times it may take 3-5
minutes for the radio output to come back on. Sometimes
I need to remove the phone from the cradle to get the
radio to un-mute. I can not seem to determine that there
is any particular usage pattern that determines this
variability in the radio mute function.
The Smarteq particulars are
Prod No. 70437
Nok. 7110/6210/6150/6110/5165/5110 Handsfree Pro full
function car kit.
On the back of the Control box is stamped
N 5/6/7110/6210
S-71382
RC2B8 S5.7
The circiut board-
C25Pro-R2
Smarteq
The 28 pin IC has
RC288
S5.7
6110
The 20 pin IC has
0149
6110
T3150
The two smarteq control boxes seem the same except the
one purchased more recently has a different code on the
smaller IC (20 pin)
0131
6110
T2929
The phone
is a Nokia 6310i TYPE NPL-1
Firmware V 5.51
Date 08-07-03
NPL-1
The radio mute works fine with the 6210 phone (reliably
stays mute for 5 secs after a key is pressed)
Is this a documented problem?
Is there a fix for this problem with the 6310i ( firmware
change for either the phone or the Smarteq control box)
thanks
› See More: Nokia 6310i and Smarteq Handsfree
Phones Discussed Above
More Nokia 6310I topics | Nokia Forum | Reviews |
Similar Threads
- alt.cellular.verizon
- alt.cellular.nokia
- alt.cellular.nokia
- alt.cellular.nokia
- alt.cellular.nokia
Aws gpu
in Chit Chat