It seems, that you are trying to use bluetooth connection for Oxygen Phone
Manager II and Nokia 6230.

Please, check the following settings for bluetooth connection:

In case of Widcomm drivers:

1) Pair your phone with PC using service named 'Nokia PC Suite' in 'My
bluetooth places' folder before running Oxygen Phone Manager II
2) Open 'Control panel' -> 'Bluetooth configuration' -> 'Client
applications' -> 'Bluetooth serial port' -> 'Properties' - just remember
this virtual COM port.
3) Run Oxygen Phone Manager II and add COM port from point 2) in 'Tools' ->
'Options' -> 'Connection and common' -> 'Connection' -> 'Add port' Make
sure, that its type is set to 'Bluetooth serial port' and all other
connection settings are off. Press 'Ok' to confirm settings.

Now the program should discover the phone on Phone Explorer panel.

In case of Microsoft drivers:

1) Add your phone to paired bluetooth devices in 'Control panel' ->
'Bluetooth devices' -> 'Devices' -> 'Add'
2) Open 'Control panel' -> 'Bluetooth devices' -> 'COM ports' - remember
virtual COM port marked with 'Nokia PC Suite' sign
3) Run Oxygen Phone Manager II and add COM port from point 2) in 'Tools' ->
'Options' -> 'Connection and common' -> 'Connection' -> 'Add port' Make
sure, that its type is set to 'Bluetooth serial port' and all other
connection settings are off. Press 'Ok' to confirm settings.

These instruction applies to version 2.3.1 or higher. In latest version
2.5.0 we also added DKU-2 cable support for Nokia 6230 phone.

If you have any questions and/or suggestions, concerning our
program, feel free to post them on our official forum
http://www.opm-2.com/forum/

Best regards, Maxim Vyalkov
Oxygen Phone Manager - all you want from your Nokia
[email protected]
http://www.oxygensoftware.co.uk/
http://www.smsactivex.com/

Hello, mark!
You wrote in conference alt.cellular.nokia on Tue, 9 Nov 2004
21:53:20 -0000 from address [email protected]:

>had a 6100 and got rid of operator logo using oxygen - using bluetooth
>with
>a 6230 now. oxygen connects then disconnects so resolved to use pc
>suite. if
>if creata a transparent image and give it extension .gif can not use as
>logo
>as i have seen posted about. do i save as .logo or .log or .lgo - is
>there a
>method to get rid of the unsightly orange sign in the middle of my
>great
>looking wallpaper.
>thanks
>mark





› See More: operator logo