1. #1
    pigwidgin
    pigwidgin is offline
    Newbie

    Posts
    1
    I wasn't sure where to post this since Motorola 60C flip phones are ancient, but I wanted to at least get my question in a Motorola forum where folks might happen to have had experience with this.

    We have two ancient Motorola 60Cs that are going to be recycled. I managed to do a Master Reset and Master Clear on both of them but now I'm trying to delete our phone numbers off of them. I have tried the programming instructions based on the user guide, which is here:

    https://www.manualslib.com/manual/46...mming&selected...

    Basically, it says to just dial 74663+#+Menu+Menu and that gets you into the user activation menu. Then you supposedly can select NAM1 and go from there. Well, when I do this, it goes into some sort of call menu, not the programming menu. I am doing this when it is powered on with power cord attached. Is there anyone out there who has fiddled with these old phones and remember how to do this? I am not sure why it is not working. Perhaps the phone needs to be in some specific mode other than just powered up? Do I have to power it on holding any specific keys before entering this set of instructions they specify? I also noticed that the user activation menu is accessed slightly differently for V60 vs 60C, which entails needing the carrier service id for your phone. Before I realized ours were the 60C model, I tried the other method, which requires inputting #<5 digit carrier id>#, the phone "dials" it and connects, and then I input 000000 for the factory password and then hit the OK, the OK is really set to store the number, and so it goes into a menu to store the number I just called. Since these are 60C phones, I would not expect the V60 method to work, but neither approach seems to go into an activation menu.

    Thanks for the help!


    See More: Need help with old Motorola flip phone




  2. #2
    Uanidawl
    Uanidawl is offline
    Junior Member

    Posts
    17

    Re: Need help with old Motorola flip phone

    Do I have to power it on holding any specific keys before entering this set of instructions they specify?
    Last edited by Uanidawl; 03-27-2021 at 12:45 AM.



  3. #3
    Tonadel
    Tonadel is offline
    Member

    Posts
    33

    Re: Need help with old Motorola flip phone

    Maybe the code required to open engineering menu is different between regions, have you tried checking if that's the case?



  4. #4
    Buldozerus
    Buldozerus is offline
    Sr. Member

    Location
    https://cv-shop.ch/
    Posts
    215

    Re: Need help with old Motorola flip phone

    Hello, this happens not often, but it happens. When Stericycle Phone Number, the wife saw in the morning newspaper, assumed a slightly different level of services in the morning newspaper. Therefore, on the site left your own review. On the other hand, according to the ratio of price and quality, we received very good services, perhaps just wanted more. The most important thing is not to closing, and always be able to void the customer that you would like to get at the exit.



  • Similar Threads







  • Quick Reply Quick Reply

    If you are already a member, please login above.