I need help unlocking the Idenpro I purchased from
soft fo gsm very poor instructions that don't work I've tried over and over again to do what the instructions say to do but its impossible to do it they just don't work.


here are the instructions they say to do.


Setup for Iden Pro

(Before you begin, put a shortcut to WinHex.exe file on Desktop for a simpler installation)



1. Extract all of the contents of the *.zip file to your Desktop. Now open the WinHex.zip file, extract folder, and follow the directions below:

Installing WinHex |
Open the “Setup” file in the “WinHex” folder and continue through the install as you would with any program.

Once WinHex is installed, open the “License Number” folder within the “WinHex” folder

Open the “License Number.txt” file

Copy ALL the text within this file (highlight it ALL and press CTRL-C)

In WinHex, click “Help” from the top Menu, then down to “Register”. Now, paste (CTRL-V) the information from the text file into the empty box. Click “Ok”

You have now registered your copy of WinHex.

Now,

Extract the idenPro.zip file and extract the contents to C:\
The files should be in C:\idenpro




Now open up IdenPro from the C:\idenpro folder and when you get to where the hardware finger print is, stop and leave it running. Reverse the fingerprint


2. Open WinHex and remember DON'T CLOSE IDEN PRO!!

3. Press ALT + F9 together, a box labeled Virtual Memory will appear.

4. Scroll down until you see IdenPro, click on the second one (the one closer to the bottom / with a higher number after it) then click OK

5. Click Entire Memory

6. Make sure that Hex Display Only is all that is checked in the View option on the Toolbar

7. Go to where it says Search on the toolbar and click it and then select Replace Hex
Values

8. Put this in the Replace with field E7DBDB16

9. In the Search For space you will put the reversed fingerprint.
in this space . Select the “Prompt when found” option
.
10. Click Yes, when prompted all three times ,the message should be "Replaced 3 Times"

11. Go back to the Raptor Screen and enter: Username: Ismeal

Key: 000016-A6R9Z9-NZGTZ8- X072BJ-43MK23-7F9083-90XZBX-4K7GEB-0W94W7-YQE1YY

12. Your key will be saved and you’ll be asked for a password. The password is rikstersascammer , you’ll be asked for this password every time. Your copy of IdenPro is now unlocked and ready for
use.

first of all you can even get the reverse fingerprint to show up in the editor it can't find it and everything this guys says to do seems to be the opposite.
can someone please help me to get this program unlocked so i can use it thanks alot.


See More: Unlocking Idenpro