reply to discussion

Post a reply to the thread: taking off locked info on SGH-A707

Your Message

If you are already a member Click here to log in
 
  • :)
  • :heart:
  • :(
  • ;)
  • :p
  • :cool:
  • :rolleyes:
  • :ah:
  • :evil:
  • :flamemad:
  • :sad:
  • :laugh:
  • :D
  • :smart:
  • :blush:

Send Trackbacks to (Separate multiple URLs with spaces)

You may choose an icon for your message from this list

Additional Options

  • Will turn www.example.com into [URL]http://www.example.com[/URL].

  • If selected, :) will not be replaced with smile

Subscription

Topic Review (Newest First)

  • 08-22-2007, 04:00 PM
    707 in 916
    DISCLAIMER: You can mess up your phone when you delete the phone DB. Do this at your own peril. You will lose your address book and call history at the least.

    EDIT 2: This solution might be kind of useless. After every phone reboot, if you add contacts using your phone, the first 7 get the IDs 0-6 since your phone doesn't think those are taken. Then, when you reboot the phone, those first 7 get deleted due to the service number magic (see procedure for more detail about this phenomenon). The fix for this is to add 7 fake users USING YOUR PHONE after every reboot and before adding any new users for that session. I think it can be as simple as duplicating one of your existing contacts 7 times. You could just have a blank or "0" user at the top for such a purpose. This begs the question, why should you do all this to get rid of the 7 service numbers when you then have to have 7 fake numbers in there anyway? The answer is you shouldn't. This procedure is only useful for people who have fairly static address books and will only add contacts every once in a while. The best way is to add them using PC Studio. It starts at the end of your IDs instead of the beginning. Unless you are willing to deal with this hassle, I'm pretty sure the service numbers are just something you're going to have to deal with until someone finds and disassembles the firmware.

    1. Put phone in Samsung + PC Studio USB modes
    2. connect phone to PC
    3. Open PC Studio
    4. Back up your contacts to PC, because you will lose them and your call history at the least
    5. Close PC Studio
    6. Disconnect phone from PC.
    7. Switch phone to Qualcomm USB mode.
    8. Reconnect phone to PC.
    9. Open up BitPim and connect to phone's filesystem
    10. Backup all the files in /DB2 and all its subdirectories to PC
    11. Backup /User/Ct/Readonly.dat and /SystemFS/User/Ct/Readonly.dat to PC (they should be the same file, so you only have to back up one of them)
    12. Delete /User/Ct/Readonly.dat, /SystemFS/User/Ct/Readonly.dat, and /DB2/phonedb/backupDB/phonedb.00 from phone
    13. Close BitPim
    14. Disconnect phone from PC
    15. Reboot phone
    16. When phone has fully finished booting, go into your address book and see that it is blank.
    17. Switch phone back to Samsung + PC Studio USB modes
    18. Reconnect phone to PC
    19. Open PC Studio
    20. In the PC Phonebook of PC Studio's contacts manager (Phone Editor), you should have all your saved contacts. At this point, you could copy all your contacts onto the phone, BUT the first 7 contacts would be gone next time you rebooted the phone. This obviously has something to do with the fact that there are 7 service numbers.
    21. To remedy this, create 7 fake contacts named "000001" through "000007" in the PC Phonebook of PC Studio. Those are good names, because they have to be the first 7 alphabetically
    22. Sort the PC Phonebook by first name ascending (see picture). The ID number in the PC Phonebook doesn't matter, as far as I can tell. They get copied to the phone in the order in which they are sorted when you hit "Copy".

    23. Select All the entries in the PC Phonebook and copy them.
    24. Go to the ME section of the Phone Phonebook. Paste.
    25. When the copy is complete, you should see that the first 7 entries (IDs 0-6) are your fake contacts.
    26. Close PC Studio.
    27. Disconnect phone from PC.
    28. Reboot phone.
    29. When the phone has finished booting, open up your address book. There are all your contacts!
    30. Reboot phone one last time for good measure.

    If you connect to PC Studio, again, you should see that your actual first contact in the ME section of the Phone Phonebook is ID 7 (see picture). The first 7 (IDs 0-6) are being masked by the missing 7 service numbers in some way.


    You're done!

    EDIT: If something went wrong, try to restore the backed up files using BitPim. Don't blame me. I just found a way to do something and thought I'd share it.
  • 08-22-2007, 03:27 PM
    sage5735
    I'd be very curious to know how to do this as well. You can access the file system with bitpim and a usb cable, but I haven't yet been able to find these entries...
    I've read about BitPim on many other sites & also on their own website. Has anybody personally used this program ?

    Does BitPim help with "akey" (authentication key, or code) which seems to allow the reprogramming of the ESN (electronic serial number) ?

    The reason for my question is related to my wet cell phone story. This is one nasty way to reset any phone back to its defaualt.

    Once again, sorry for the cross-posting.

    My experience: phone (Samsung SPH-A500) dropped into picnic cooler, sat in water for an hour. Being a moron, I just wiped off the phone & opened the clamshell cover which powered on the phone. Bad idea. Poof ! Started acting wacky. I shut off phone. Removed the battery. Completely disassembled phone & dried it out.

    Phone lost all its settings. Not just the phone book, or the call history, or the alarm clock settings, or the memos, nor the downloaded ring tones. But the ESN (electronic serial number) necessary to connect to the cell network, the MIN (mobile identifier number, ie your phone number), the SID (service provider identifier number) among other settings.

    My cellphone, Samsung SPH-A500 was purchased locally, here in Winnipeg, Manitoba, Canada from a MTS (manitoba telecom services) dealer about 2002 or 2003. Attempting to get my submarined cellphone back in service, I have learned much about cellphone hardware, software, keypad programming, service providers, etc.

    Interesting history: manufactured in Korea. Sent to USA for Sprint. Sent to Ontario, Canada for Bell Mobility. Sent to Manitoba, Canada to be eventually sold to me by MTS (manitoba telecom services). Well travelled phone !

    Now, when I turn on my cellphone, I see the Samsung logo during bootup, just like the past 4 years. But the MTS logo is replaced by the Bell logo. The software layering done by the MTS dealer 4 yrs. ago is lost. It looks like all the software settings went back to the default. Other than the Bell logo, it looks, feels, smells the same (only cleaner, much cleaner - 4 yrs of pocket lint gone).

    I learned how to access the Service Menu using the keypad (many thanks to the Sprint USA techs & 1-800 number). I learned to reprogram the NAM (resetting the MIN, the SID, the IMSI (international mobile serviceprovider identifier), the Country Code, etc.

    How does the phone work ? Well........so far whenever I make a call, I can only reach my service provider.

    The next step is to find out how to reset my ESN. Appears to need an "akey" (authentication key, or code).

    Almost there.
  • 08-19-2007, 01:45 PM
    wtfiuwy
    I'd be very curious to know how to do this as well. You can access the file system with bitpim and a usb cable, but I haven't yet been able to find these entries...
  • 06-05-2007, 04:34 AM
    Robb4248
    I'm not sure if the a707 is a p2k phone or not. Give p2kcommander a try to see if it will recognize your phone.
  • 06-02-2007, 11:46 AM
    BanZI29
    Hello there all. I am new here so I want to first say hello to all.
    Now, I have a A707 "sync" from cingular/ ATT and what i want to do is delete all the stock pics the phone came with along with the Random pic thing. those who own this fone should know what I'm talking about. I tried the SW that came with the fone to manage your media and stuff but when i try to delete the stock stuff, it says the files and protected and can not be deleted. the same goes for the stock ring tones.
    Can anyown point me in the right direction?
    Thanks to all that can help
    BanZI29

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •