Bluetooth Management

Enabling / Disabling Bluetooth:

1. From the home screen, tap the "All apps" icon
2. Tap "Settings" > "Bluetooth
3. Tap the Bluetooth switch and set it to "On" or "Off" to enable or disable this feature

Pairing a Bluetooth Device:

1. While on the home screen, tap "All apps"
2. Tap "Settings" > "Bluetooth"
3. Make sure that Bluetooth is enabled
4. Make the other Bluetooth device visible, if necessary
5. Once the desired device appears in the list, tap it. If it doesn’t appear, tap "Search for Devices" to start a new scanning process
6. Tap the desire device that appears in the list
7. If necessary, enter the device's passcode (by default is should be either "1234" or "0000") then tap "Connect"

Unpairing a Bluetooth Device:

1. From any of the home screens, tap "All Apps"
2. Tap "Settings" and then tap "Bluetooth"
3. Tap the "Settings" icon associated with the device that you wish to unpair
4. Tap "Unpair"

Wi-Fi Management

Scanning and Connecting to a Wi-Fi Network:

1. Tap the "All apps" icon located on the home screen
2. Tap "Settings"
3. Enable Wi-Fi by tapping the "On / Off" switch
4. Tap "Wi-Fi" (the text itself)
5. Select a Wi-Fi network that you wish to connect to
6. If necessary, enter the network's security password (and the necessary credentials) then tap "Connect"

Deleting a Wi-Fi Network Profile:

1. While on the home screen, tap "All apps"
2. Tap "Settings"
3. Make sure that Wi-Fi is enabled
4. On the Wi-Fi screen, tap and hold the name of the desired saved network
5. Press "Forget network"

Enabling / Disabling GPS:

1. While viewing one of the home screens, tap "All apps"
2. Select "Settings"
3. Under "Personal", tap "Location access"
4. To enable or disable GPS, press the "On / Off" switch associated with GPS satellites

Enabling / Disabling Emergency Alerts:

1. From any of the home screens, press "All apps"
2. Tap "Emergency Alerts" and then tap "Settings"
3. Press the "Menu" icon located at the bottom-right corner of the screen
4. Tap "Settings"
5. Enable or disable the following alerts:
   
   • Show Imminent Threat
   • Show Extreme Threat
   • Show Severe Threat
   • Show AMBER Alert

Note: Presidential alerts are enabled by default and cannot be disabled

System Manager (T-Mobile)

T-Mobile's System Manager makes is easier for the carrier to help you with various problems regarding your device. You can choose to opt in our out of System Manager by following the steps below:

1. Tap the "All apps" icon located on the home screen
2. Tap "Settings"
3. Scroll down to "Personal" and tap "Backup & reset"
4. Tap "Collect diagnostics"
5. Mark or clear the check box associated with "Allow Diagnostics" to enable or disable System Manager
6. Tap "Close"