Tear down the Huawei P9 for Screen, Battery, Camera

Huawei P9 Android smartphone. Announced 2016, April. Features 3G, 5.2″ IPS-NEO LCD capacitive touchscreen, Dual 12 MP camera, Wi-Fi, GPS, Bluetooth.
Tools Needed:
Ejector Tool
Guitar Picks
Tweezers
Spudger Tool
Pentalobe Screwdriver
Phillips Screwdriver


Step 1: Power off the Huawei P9 and remove the Huawei P9 card tray.

Step 2: Undo the 2 charging port screws

First with the phone sucker suction force open a crack from the front panel
Then use pry bar slot in from the side,
Slide up and down;
After the open side of the draw,
Then carefully cut open the top and bottom sides,
separated shell


Step 3: Disconnect the P9 fingerprint sensor flex cable.

Step 4: Undo the screws locking motherboard and charging port.

Disconnect the flex ribbon connectors (disconnect-motherboard-connectors)

Step 5: disconnect-loudspeaker-connection.

Step 6: Pry to release the Huawei P9 charging port module, earphone jack and vibrating motor.(release huawei-p9-charging-port)

Step 7: Remove the Huawei P9 battery disconnect-battery-connector

Step 8:remove the huawei-motherboard-flex-cable-ribbon.

Now the Huawei P9 was disassembled.

Read more hcqs.us