Enabling Wi-Fi and Connecting to a Network:

1. Swipe down from the status bar using two fingers to open the Quick Settings panel
2. Tap the "Wi-Fi" tile to enable Wi-Fi connectivity
3. Press the "…" button attached to the Wi-Fi tile
4. In the list of networks, select the one that you wish to connect to. (Alternatively, tap the "Menu" button depicting three vertical dots, and tap "Add network" to add a network manually)
5. If prompted, enter the network's security password and other details
6. Tap "Connect"

Enabling / Disabling Notifications from Unsecured Wi-Fi Networks:

1. Using two fingers, swipe down from the status bar and access the "Quick Settings" panel
2. Make sure that Wi-Fi is enabled
3. Press the "…" button associated with the "Wi-Fi" tile
4. In the list of networks, tap and hold the one that you wish to be notified (or not) about
5. Select either "Block network notification" or "Unblock network notification"

Connecting to a Wi-Fi Network via WPS:

In case you are using a Wi-Fi router that features WPS (Wi-Fi Protected Setup), then you can easily connect your HTC One Mini to it by following the steps below:

1. Open the "Quick Settings" panel by swiping the status bar down using two fingers
2. Make sure that Wi-Fi is enabled and tap the "…" button associated with the tile
3. Press the "Menu" icon and select "WPS Push"
4. Press the "WPS" button located on your Wi-Fi router

Note: to use the WPS PIN method, press the "Menu" button and select "WPS Pin Entry" instead

Disconnecting From a Wi-Fi Network:

1. Swipe down from the status bar using two fingers
2. Tap the "Wi-Fi" tile if necessary, to enable Wi-Fi
3. Press the "…" button associated with the Wi-Fi tile
4. In the list of networks, you can:
   
   • Select a wireless network that you are connected to, and tap "Disconnect"
   • Press and hold a network's name and tap "Forget network"

Connecting to a Different Network:

1. Access the "Quick Settings" panel
2. Make sure that Wi-Fi is enabled
3. Press the "…" button associated with the Wi-Fi switch
4. To start a fresh network scanning process, tap "Menu" > "Scan"
5. Select the network that you wish to connect to. If necessary, enter the network's password and tap "Connect"

Connecting to a Public Wi-Fi Network Automatically (WISPr):

You can set your device so that it will automatically log into a public network that you use regularly, by adding your login credentials to the WISPr settings (Wireless Internet Service Provider roaming). To do so:

1. Swipe down from the status bar using two fingers
2. In the "Quick Settings" panel, tap the "Wi-Fi" tile and enable Wi-Fi connectivity
3. Press the "…" button associated with the Wi-Fi tile
4. Tap the "Menu" icon > "Advanced"
5. Under "WISPr settings", tap the "Auto login" option
6. Tap "WISPr account settings" > "Add a new account"
7. Enter the provider's name, your login name and password in the appropriate fields
8. Press the "Menu" icon and tap "Save"