- 07-05-2006, 03:02 PM #1Newbie
- Posts
- 4
I have an i860 that when I turn it on...it says i860...then the screen turns the blue...and it shuts off...
what could be the problem??
SnaveZ
› See More: i860 probs...
- 07-05-2006, 04:04 PM #2Newbie
- Posts
- 4
Re: i860 probs...
ok...what happens is...when I turn the phone on...it says i860...then 10 seconds later it goes to the blue screen like it's going to start up...then it shuts off...
the only way I can turn the phone back on is to take out the battery...and put it back in...
I can't connect to the phone at all...and I really want to get this thing running again...
I have a feeling that there is a problem with the code plug...but I can't connect to the phone to get the code plug...
help me please!!!
- 07-05-2006, 09:06 PM #3Sr. Member
- Posts
- 101 - liked 6 times
Re: i860 probs...
going back and forth between nextpimp huh?
Like we said on the other forum, take it to a service center and have it looked at. If you modded your cp and messed it up your out of luck and have to buy a new phone. Basically you have to tell us what you did to it so we can help you fix the problem.
- 07-05-2006, 09:14 PM #4Newbie
- Posts
- 4
Re: i860 probs...
What happened was...I had an i860 that I got from work...it was a phone that some guy dropped into a bucket of water...
the old mobo worked for a little while...but would get really hot and kill batteries...so I got another mobo from someone else...
I put the phone together with the LCD from the old phone (that works fine) and this mobo does what I said it does...turns on, i860...wait 10 secs...blue...then off...
I didn't touch the codeplug or anything...
I thought just swapping the mobo would work...because I really want an i860 phone to work for me...but I've been hitting walls this entire time...
I wish someone could help me get this phone working...because my everyday phone is dying...
Thanks,
SnaveZ
- 07-05-2006, 09:40 PM #5Sr. Member
- Posts
- 101 - liked 6 times
Re: i860 probs...
wtf is a mobo? a board?
- 07-05-2006, 09:46 PM #6Newbie
- Posts
- 4
Re: i860 probs...
yeah...the main board of the phone
- 07-05-2006, 10:03 PM #7Sr. Member
- Posts
- 101 - liked 6 times
Re: i860 probs...
where did you get this board from? used from someone or new? It almost sounds like you bought a bad board.
- 12-26-2007, 09:10 PM #8Newbie
- Posts
- 2
Re: i860 probs...
Sounds like my problem. Phone fell in the water, I put a new battery in the phone and when the phone stars its a low battery and phone gets extremely hot. How do I fix?
- 12-27-2007, 08:34 PM #9
Re: i860 probs...
Sounds like it needs to be flashed, you can flash it with Xflash program, kinda complicated to use but it will work. The one I have is version 3.2 I dont know if theres a recent version.
2 thinks I would do.
First, remove board from flip, front housing,back housing. Spray the board with control/contact cleaner & lubricant (actual name and can be purchased at radioshack) let the board sit in the sun for 2 days, then install it again and retry.
If problem remains, remove board once again and get it completly wet with alcohol and clean every connection with a qtip or small brush (alcohol will never ever ever hurt or damage your board) I use I.P.A Alcohol, but I heared that rubbing alcohol works as well.
Hope it helps, it helps me all the time.
Phones Discussed Above
More Motorola i860 topics | Motorola Forum | Reviews |
Similar Threads
- Nokia
- Samsung
- Computers
- Computers
Immerse Yourself in Sensual Massage on rubpage
in Chit Chat