Results 1 to 3 of 3
  1. #1
    Scott Seidman
    Guest
    I'm having a host of problems getting a bluetooth connection on my t40p
    with native bluetooth support

    I can pair no problems, and when I try to modem out, the sony shows a two-
    way connection, but the syncing program and the bluetooth places don't
    recognize the connection. Any suggestions??

    Thanks
    Scott



    See More: T616 bluetooth problem, Thinkpad T40p




  2. #2
    Steven Wilmot
    Guest

    Re: T616 bluetooth problem, Thinkpad T40p


    "Scott Seidman" <[email protected]> wrote in message
    news:[email protected]...
    > I'm having a host of problems getting a bluetooth connection on my t40p
    > with native bluetooth support
    >
    > I can pair no problems, and when I try to modem out, the sony shows a two-
    > way connection, but the syncing program and the bluetooth places don't
    > recognize the connection. Any suggestions??
    >
    > Thanks
    > Scott


    I recently called Sony-Ericsson Support (UK) and was surprised at the
    response.

    Basically, it seems as though the trick(s) are:

    Under phone monitor (COM Ports), enable ports COM4 and COM5.

    Under the Wireless pairing, you should see Services, ensure that "Dialup
    Networking" is ticked.

    That should enable a "Bluetooth Modem" to be detected and used.

    This will then reside on a different COM port to the "Serial Service" used
    by the normal Bluetooth connection (including synchronization).

    Steven





  3. #3
    Scott Seidman
    Guest

    Re: T616 bluetooth problem, Thinkpad T40p

    "Steven Wilmot" <[email protected]> wrote in
    news:[email protected]:

    >
    > "Scott Seidman" <[email protected]> wrote in message
    > news:[email protected]...
    >> I'm having a host of problems getting a bluetooth connection on my
    >> t40p with native bluetooth support
    >>
    >> I can pair no problems, and when I try to modem out, the sony shows a
    >> two- way connection, but the syncing program and the bluetooth places
    >> don't recognize the connection. Any suggestions??
    >>
    >> Thanks
    >> Scott

    >
    > I recently called Sony-Ericsson Support (UK) and was surprised at the
    > response.
    >
    > Basically, it seems as though the trick(s) are:
    >
    > Under phone monitor (COM Ports), enable ports COM4 and COM5.
    >
    > Under the Wireless pairing, you should see Services, ensure that
    > "Dialup Networking" is ticked.
    >
    > That should enable a "Bluetooth Modem" to be detected and used.
    >
    > This will then reside on a different COM port to the "Serial Service"
    > used by the normal Bluetooth connection (including synchronization).
    >
    > Steven
    >
    >
    >


    After farting around for two days, I just got most of the way there. It
    seems that IBM had a driver update for the T40p that I just couldn't get
    installed correctly. I finally got that installed right, and now things
    seem much better. I can actually connect to and browse the device.

    Still can't modem out, but I think thats because I need to activate CSD
    to be able to dial up my non-cingular ISD. Is this right??
    The link gets established, and the phone says its calling the number,
    and then things conk out.

    Scott



  • Phones Discussed Above

    Sony Ericsson T616 More Sony Ericsson T616 topics Sony Ericsson Forum Reviews
  • Similar Threads

    1. alt.cellular.cingular
    2. alt.cellular.cingular
    3. alt.cellular.ericsson
    4. alt.cellular.ericsson
    5. alt.cellular.ericsson