Holding down "1" for voicemail doesn't work?

I recently flashed/flexed my v525 but now when I hold down the 1
button to dial voicemail it instead calls one of the contacts in my
phonebook. How do I set it up so that holding the 1 will dial the
voicemail #?

Thanks.

---

› See More: Holding down "1" for voicemail doesn't work?

Program the voicemail number into phone memory location 1 and it will
work. You'll have to delete or move the existing number that is set to
1. You can change the numbering in MPT 2.20. I've programmed mine to
dial the number, wait for the connection and then dial another 1 to
start playback. The 1 for voicemail is just a turbodial position like
the other single digits of 1-9.

From:B
[email protected]

> I recently flashed/flexed my v525 but now when I hold down the 1
> button to dial voicemail it instead calls one of the contacts in my
> phonebook. How do I set it up so that holding the 1 will dial the
> voicemail #?
>
> Thanks.

Program the voicemail number into phone memory location 1 and it will
work. You'll have to delete or move the existing number that is set to
1. You can change the numbering in MPT 2.20. I've programmed mine to
dial the number, wait for the connection and then dial another 1 to
start playback. The 1 for voicemail is just a turbodial position like
the other single digits of 1-9.

From:B
[email protected]

> I recently flashed/flexed my v525 but now when I hold down the 1
> button to dial voicemail it instead calls one of the contacts in my
> phonebook. How do I set it up so that holding the 1 will dial the
> voicemail #?
>
> Thanks.

"B" <[email protected]> wrote in message
news:[email protected]...
>
> I recently flashed/flexed my v525 but now when I hold down the 1
> button to dial voicemail it instead calls one of the contacts in my
> phonebook. How do I set it up so that holding the 1 will dial the
> voicemail #?
>
> Thanks.

A user configuration issue. AIUI you can program just about anything you
like to lie behind the number pad, but when flashed this may be lost.

"B" <[email protected]> wrote in message
news:[email protected]...
>
> I recently flashed/flexed my v525 but now when I hold down the 1
> button to dial voicemail it instead calls one of the contacts in my
> phonebook. How do I set it up so that holding the 1 will dial the
> voicemail #?
>
> Thanks.

A user configuration issue. AIUI you can program just about anything you
like to lie behind the number pad, but when flashed this may be lost.